Sloan TRF 8036-N User manual

Code No. 08160063
Rev. 1(07/22)
INSTALLATION INSTRUCTIONS FOR
TRUFLUSH ELECTRONIC DUAL FLUSH FLUSHOMETERS
TruFlush Model:
TRF 8036-N
TRF 8024-N
PRIOR TO INSTALLATION
TOOLS REQUIRED FOR INSTALLATION
• Phillips screwdriver
This valve is designed for new construction or where there is easily
accessed plumbing for the xture and the valve.
This valve is designed for minimum six inch (152 mm) wall space
depth. Distance from center of the valve (inlet or outlet pipe) to the
nished surface of the wall can vary from 2”-3” (51-76 mm).
Wall plate opening must be of 5.6” x 5.6” (142 x 142 mm). Mud plate
is provided and must accompany valve for proper installation. Mud
plate is removed after wall is nished.
ITEMS INCLUDED WITH THE PRODUCT
1. Wall Box and Electronic Valve Assembly
2. Mud Guard
3. Adjustment Tool
4. (2) #8-32 x 2” screws to secure mud guard
5. (2) 1/4”-20 x 2” screws to remove activation
assembly
6. Installation instructions
ITEM #1: WALL BOX AND
ELECTRONIC VALVE
ASSEMBLY
ITEM #2: MUD GUARD
ITEM #3: ACTIVATION
ASSEMBLY TOOL
ITEM #4: #8-32 X 2" TRUSS
HEAD SCREWS
ITEM #5: 1/4-20 X 2"
SCREWS
SENSOR VALVE BOX
ITEM #1: WALL BOX ITEM #2: WALL PLATE ITEM #3: SENSOR ASSEMBLY ITEM #4: ACTIVATION BUTTON ITEM #5: BATTERY PACK ITEM #6: 4X BATTERIES ITEM #7: 4X #8-32 X 2"
TRUSS HEAD SCREWS
ITEM #7: 5/64" HEX KEY
WALL PLATE BOX
2. Mud Guard
1. Wall box and electronic
Valve Asembly
4. Mud Guard Screws
3. Adjustment Tool
VALVE BOX
ITEM #1: WALL BOX AND
ELECTRONIC VALVE
ASSEMBLY
ITEM #2: MUD GUARD
ITEM #3: ACTIVATION
ASSEMBLY TOOL
ITEM #4: #8-32 X 2" TRUSS
HEAD SCREWS
ITEM #5: 1/4-20 X 2"
SCREWS
SENSOR VALVE BOX
ITEM #1: WALL BOX ITEM #2: WALL PLATE ITEM #3: SENSOR ASSEMBLY ITEM #4: ACTIVATION BUTTON ITEM #5: BATTERY PACK ITEM #6: 4X BATTERIES ITEM #7: 4X #8-32 X 2"
TRUSS HEAD SCREWS
ITEM #7: 5/64" HEX KEY
WALL PLATE BOX
5. Activation Assembly
Screws
6. Instructions
• Adjusting tool (supplied) •Water Level
Sloan® India Private Limited - Limited Warranty Summary
Sloan India Private Limited (“Sloan”), warrants its products against defects in materials and workmanship,
excluding damage caused by matters beyond Sloan’s reasonable control. Instructions for filing claims can be
found in the Limited Warranty which can be obtained at https://www.sloan.com/company/international/sloan-
india or by requesting a free copy by telephone to Sloan India toll free number 1 800 123 3080 or via Mobile:
[phone] or via Landline : [phone]. Sloan will repair or replace your defective product, or
provide a refund, as your exclusive remedy.
This is only a general summary of Sloan’s Limited Warranty so it is important to note that the specific terms,
conditions, limitations and exclusions, including the duration of warranty coverage for your particular Sloan
product, are contained in the actual Sloan Limited Warranty. The Limited Warranty is subject to applicable
laws in your country, state, province or other jurisdiction—and disputes arising under the Limited Warranty are
to be resolved by binding arbitration unless you provide Sloan with an opt-out notice no later than 30 days
after your purchase date. In case of a conflict with this summary, the terms and conditions set forth in the
complete Limited Warranty will prevail.

Finished Wall Finished Floor
1 1/4” BSP
INLET
1 1/2”
OUTLET
NPSM
2” (51 mm) MINIMUM
3” (76 mm) MAXIMUM
C.L. TO FINISHED WALL
2.0” - 4.0”
(50 mm - 100 mm)
Toilet Seat
(not supplied)
4.5”-6.5”
(114 mm-165 mm)
2” (51 mm) NOTE : Flush Connections shown in dotted lines
not included.
ROUGH-IN
WITH THE EXCEPTION OF INLET,
DO NOT USE PIPE SEALANT. DO NOT
USE PLUMBING GREASE ON VALVE
COMPONENTS OR COUPLINGS!
!!! IMPORTANT !!!
1. CONNECT FLUSHOMETER
SLOAN’S FLUSHOMETERS ARE DESIGNED TO OPERATE WITH 20 TO 80
PSI (138 TO 552 KPA) OF WATER PRESSURE. THE MINIMUM PRESSURE
REQUIRED TO THE VALVE IS DETERMINED BY THE TYPE OF FIXTURE
SELECTED. CONSULT FIXTURE MANUFACTURER FOR MINIMUM PRESSURE
REQUIREMENTS. MOST HIGH EFFICIENCY WATER CLOSETS REQUIRE
A MINIMUM FLOWING PRESSURE OF 25 PSI (172 KPA). MANY BUILDING
CODES AND THE ASME A112.19.2 FIXTURE STANDARD LIST MAXIMUM
STATIC WATER PRESSURE AS 80 PSI (552 KPA).
CLOSET
40”
(1016 mm)
2. Connect the inlet pipe to the Top CPVC
connection to bottom
(“OUT”) of flushometer.
3. Reinstall mud guard to valve. Use the mudguard
1. Remove the mudguard and save it for
later use- DO NOT DISCARD. screws (supplied).
MAKE SURE SUPPLY LINES ARE FLUSHED OUT. DEBRIS CAN DAMAGE
THE VALVE OR CAUSE VALVE TO MALFUNCTION. DO NOT CONTINUE THE
INSTALLATION UNTIL SUPPLY LINES ARE CLEAR.
!!! IMPORTANT !!!
!!! IMPORTANT !!!
2
connector ("IN") and fixture flush

Finished Wall
4. Use the Water Level to make sure the Valve is level. Finish the wall. Use
marks on mudguard to make sure finished wall is in between 2” (51 mm)
and 3” (76 mm) from centerline of the inlet pipe.
5. Only Remove the mudguard when installing Wall Plate. For more information
Refer Wall Plate Installation Manual (08160044).
Note: Removing the Mudguard beforehand might result in damge to the solenoid
from debris.
2. CONNECT FLUSHOMETER (HARDWIRE CONNECTION)
TRANSFORMER NOT PROVIDED. IT IS VERY IMPORTANT THAT THE
OUTPUT VOLTAGE OF THE TRANSFORMER MUST BE 6VAC FOR THE UNIT
TO FUNCTION PROPERLY. SLOAN EL-386 OR EL-451 IS RECOMMENDED
(120 VAC/6VAC) OR ELG-220 (220VAC/6VAC).
1. Remove one of the knockout caps and route the transformer wire trough it inside
wall box.
NOTE: Use a conduit pipe to protect the transformer wire from damage during
installation.
2.Finish the wall as instructed above.
!!! IMPORTANT !!!
3

4
Item Description
No.
1 Valve Assembly Less Plate
2 Piston Assembly
3 Activation Assembly
PARTS LIST
2
3
1
For complete listing of items available for repair, please consult Maintenance and Repair Guide.
available on www.sloan.in
2.. INSTALL WALL PLATE ASSEMBLY
Refer Wall Plate Installation Manual (08160044).
© 2022SLOAN
Code No. 08160063
Rev. 1(07/22)
Manufactured by Sloan India Pvt. Ltd, patents pending.
SLOAN INDIA PRIVATE LIMITED
344, PHASE-II UDYOG VIHAR, GURGAON 122015 Phone: [phone]
Toll Free: 1800.123.3080 | [e-mail] | sloan.in | copyright © 2021 Sloan All rights reserved
Wall Plate Assembly Installation Manual (08160044), available on www.sloan.in