SMC Networks ITV2000 series Operating instructions

Microprocessor-Controlled Electro-Pneumatic Regulator ITV2000
EASY PROGRAMMING GUIDE
Page 1
last updated 11/03/03 10:05 AM
MICROPROCESSOR-CONTROLLED
E-P REGULATOR
ITV2000 CONTENTS:
1. LAYOUT IDENTIFICATION
2. WIRING
3. INPUT SIGNAL
4. KEY LOCKFUNCTION
5. SET POINT PROGRAMMING
6. ADJUSTING MINIMUM &
MAXIMUM PRESSURES
7. MONITOR OUTPUT
8. ERRORMESSAGES
9. SPECIFICATIONS

Microprocessor-Controlled Electro-Pneumatic Regulator ITV2000
EASY PROGRAMMING GUIDE
Page 2
last updated 11/03/03 10:05 AM
LAYOUT IDENTIFICATION
WIRING
Please be careful when connecting the four cable wires. Improper wiring will damage the
internal circuitry.
PIN # WIRE COLOR DESCRIPTION
1Brown Supply Voltage
2White Input Signal
3Blue Ground
4Black Monitor Output
.

Microprocessor-Controlled Electro-Pneumatic Regulator ITV2000
EASY PROGRAMMING GUIDE
Page 3
last updated 11/03/03 10:05 AM
INPUT SIGNAL
•CURRENT SIGNAL TYPES (ITV20-0, ITV20-1)
Supply Voltage VS Input Signal A
24VDC (ITV200)
12VDC (ITV201)
4~20mA (ITV20-0)
0~20mA (ITV20-1)
•VOLTAGE SIGNAL TYPES (ITV20-2, ITV20-3)
Supply Voltage VS Input Signal VIN
24VDC (ITV200)
12VDC (ITV201)
0~5VDC (ITV20-2)
0~10VDC (ITV20-3)
KEYLOCK FEATURE
locked unlocked
The ITV has a key lock feature, allowing the user to disable the setting keys. This
is helpful in preventing unauthorized setting changes. By default, the keys are locked
when power is turned on. The keys must be unlocked to modify the setting information.
The display will show LOC if a key is pressed while the keys are locked.
TO UNLOCK:
¬ Press and hold the down key for 2 seconds or longer. The display will blink LOC.
Press the set key to unlock the keys, or
®Press the up key to cancel.
TO LOCK:
¬ Press and hold the up key for 2 seconds or longer. The display will blink UNL.
Press the set key to lock the keys, or
®Press the down key to cancel.

Microprocessor-Controlled Electro-Pneumatic Regulator ITV2000
EASY PROGRAMMING GUIDE
Page 4
last updated 11/03/03 10:05 AM
PROGRAMMING THE SET-POINTS
3CAUTION:When setting the minimum pressure and maximum pressure values, the new values take
effect as soon as the SET key is pressed. Use caution to avoid damage or injury.
1. UNLOCK THE KEYPAD
•Press and hold the down key for 2 seconds or longer. The display will blink LOC.
•Press the set key to unlock the keys.
•Press the SET key to continue to the next step.
2. SET THE MINIMUM PRESSURE (F_1)
•Press the UP and DOWN keys until the display shows the desired minimum pressure.
•Press and release the SET key to continue to the next step.
3. SET THE MAXIMUM PRESSURE (F_2)
•Press the UP and DOWN keys until the display shows the desired maximum
pressure.
•Press and release the SET key to continue to the next step.
4. SET THE MONITOR PRESSURE (P_1)
•Press the UP and DOWN keys until the display shows the desired monitor pressure.
•Press and release the SET key to continue to the next step.
5. SET THE MONITOR PRESSURE (P_2)
•Press the UP and DOWN keys until the display shows the desired monitor pressure.
•Press and release the SET key to finish the setup.
•The display returns to the current pressure.

Microprocessor-Controlled Electro-Pneumatic Regulator ITV2000
EASY PROGRAMMING GUIDE
Page 5
last updated 11/03/03 10:05 AM
ADJUSTING THE MINIMUM AND MAXIMUM PRESSURES
The ITV allows the user to customize the minimum pressure (zero point) at 0% input
signal and the maximum pressure (span) at 100% input signal. The minimum pressure can be set
as low as 0% and as high as 50% of the full span. The maximum pressure can be set as low as
10% and as high as 100% of the full span.
For example, an ITV203 could be set to output 35 PSI at 0% input signal, and 43 PSI at
100% input signal (there must be at least 8 PSI separation). Similarly, the same ITV203 could be
set to output 0 PSI at 0% input signal, and 8 PSI at 100% input signal.
minimum pressure (zero) adjust maximum pressure (span) adjust
MONITOR OUTPUT
The ITV is available with one of three different monitor output signals:
•ANALOG (ITV20-1): Linear analog pressure monitor signal (1~5VDC).Input impedance:
100KΩor greater
•NPN DIGITAL (ITV20-2): NPN open-collector output. Maximum load current: 30mA
•PNP DIGITAL (ITV20-3): PNP open-collector output. Maximum load current: 30mA
The NPN and PNP digital monitor outputs can be set to function in one of three different ways:
comparator mode hysteresis mode self-diagnostic mode
when P1<P2 when P1>=P2 when P1=P2=0
•The output is on whenever
the outlet pressure is
greater than P1 but less
than P2.
•The output comes on once
the outlet pressure
reaches P1. The output
will remain on until the
outlet pressure drops to
P2.
•The output is on whenever
the outlet pressure equals
the commanded pressure.
The output is off whenever
the input signal changes.
ERROR MESSAGES

Microprocessor-Controlled Electro-Pneumatic Regulator ITV2000
EASY PROGRAMMING GUIDE
Page 6
last updated 11/03/03 10:05 AM
ERROR # DESCRIPTION LED DISPLAY
1Input signal exceeds the input signal range ER1
2EPROM read/write error ER2
3Memory read/write error ER3
4Internal solenoid valve malfunction ER3
0Other ER0
*Simultaneously press and hold the UP and DOWN keys for 3 seconds or longer to reset.
SPECIFICATIONS
Supply Pressure [set pressure + 14.5psi] to 145psi1
Output Pressure 0.725~14.5psi (ITV201)
0.725~72.5psi (ITV203)
0.725~130.5psi (ITV205)
Maximum Flow 52.5 SCFM
Supply Voltage 24VDC±10% (ITV200)
12VDC±10% (ITV201)
Input Signal 4~20mADC (ITV20-0)
0~20mADC (ITV20-1)
0~5VDC (ITV20-2)
0~10VDC (ITV20-3)
Input Impedance 250Ωor less (ITV20-0 & -1)
approx. 6.5KΩ(ITV20-2 & -3)
Linearity ±1% FS
Hysteresis 0.5% FS
Repeatability ±0.5% FS
Monitor Output 1~5VDC analog
transistor (NPN, PNP), max. 30mA
1Except ITV201, which is 29PSI.

World
Wide
QS\E Support...
NorthAmerican Branch Offices For
abranch
office
near
you
call:
1-800-SMC-SMC1
(762-7621)
SMCPneumatics
Inc.(Atlanta)
1440Lakes
Parkway,
Suite
600
Lawrenceville,
GA30043
Tel:[phone]
FAX:[phone]
SMCPneumatics
lnc.(Austin)
2324-DRidgepoint
Drive
Austin,TX 78754
Tel:[phone]
FAX:
(512)
926-7055
SMCPneumatics
Inc.(Boston)
ZeroCentennial
Drive
Peabody,
MA01960
Tel:
(978)
326-3600
Fax:
(978)
326-3700
SMCPneumatics
lnc. (Charlotte)
5029-8
WestW.T.
Hanis
Blvd.
Charlotte,
NC28269
Tel:[phone]
FAX:
(704)
596-9561
SMCPneumaticsInc.(Chicago)
27725DiehlRoad
Warrenville,
lL60555
Tel:
(630)
393-0080
FAX:
(630)
393-0084
SMCPneumatics
Inc.(Cincinnati)
4598
Olympic
Blvd.
Erlanger,KY
41018
Tel:
(606)
647-5600
FAX:
(606)
647-5609
SMCPneumatics
Inc.(Cleveland)
2305EastAurora
Rd.,UnitA-3
Twinsburg,
OH 44087
Tel:[phone]
FAX:
(330)
963-2730
SMC
Pneumaticslnc.(Columbus)
3687Corporate
Drive
Columbus,OH
43231
Tel:
(614)
895-9765
FAX:
(614)
895-9780
SMCPneumaticsInc.(Dallas)
12801N.
Stemmons
Frutry,Ste.815
Dallas,
TX 75234
rel: (972\406-0082
FAX:[phone]
SMCPneumaticslnc. (Detroit)
2990
TechnologyDrive
RochesterHills,
Ml48309
Tel:
(248)
299-O2O2
FAX:(2a8)293-3333
SMCPneumaticsInc.(Houston)
9001
Jameel,
Suite
180
Houston,TX77O4O
Tel:
(713)
460-0762
FAX:
(713)
460-1510
SMCPneumaticsInc.(L.A.)
14191
Myford
Road
Tustin.
CA92780
Tel:
(714\
669-1
701
FAX:
(714)
669-1715
16850
W.Victor
Road
NewBerlin.Wl53151
Tel:
(414)
827-0080
FAX:
(414)
827-OO92
SMCPneumaticsInc.(Mnpls.)
990LoneOakRoad, Suite
162
Eagan,MN55121
Tel:
(651)
688-3490
FAX:
(651)
688-9013
SMCPneumaticsInc. (Nashville)
5000
Linbar
Drive,
Suite
297
Nashville,
TN37211
Tel:
(615)
331-0020
FAX:
(615)
331-9950
SMCPneumatics lnc. (Newark)
3434USHwy.22 West,
Ste.
110
Somerville,
NJ08876
Tel:[phone]
FAX:[phone]
SMCPneumaticsInc.(Phoenix)
2001W.Melinda
Lane
Phoenix,
AZ85027
Tel:
(623)
492-0908
FAX:
(623)
492-9493
SMCPneumatics Inc.(Portland)
14107
N.E.
AirportWay
Portland,OR97230
Tel:[phone]
FAX:[phone]
5377Glen
AldenDrive
Richmond,
VA23231
Tel:[phone]
FAX:(80a)222-5221
SMCPneumatics
Inc.(Rochester)
245Summit
PointDrive
Henrietta,NY 14467
Tel:
(716)
321-1300
FAX:
(716)
321-1865
SMCPneumaticslnc. (S.F.)
85 NicholsonLane
SanJose,CA95134
Tel:
(408)
943-9600
FAX:
(408)
943-9111
SMCPneumaticsInc.(St.Louis)
4130RiderTrailNorth
EarthCity,MO 63045
Tel:
(314)
209-0080
FAX:
(314)
209-0085
SMCPneumatics
Inc.(Tampa)
8507-H
Benjamin
Road
Tampa,FL33634
Tel:
(813)
243-8350
FAX:[phone]
SMG
PneumaticsInc.(Tulsa)
10203A East61st
Street
Tulsa.OK 74146
Tel:
(918)
2s2-782O
FAX:[phone]
SMCPneumaticslnc. (Milwaukee) SMCPneumatics
lnc. (Richmond)
Europe
ENGLAND
SMCPneumatics
(U.K.)
Ltd.
GERMANY
SMCPneumatikGmbH
ITALY
SMCltaliaSpA
FRANCE
SMCPneumatique
SA
HOLLAND
SMCControlsBv
SWEDEN
SMC Pneumatics Sweden AB
SWITZERLAND
SMCPneumatik
AG
AUSTRIA
SMC
PneumatikGmbH
SPAIN
SMC
Espafra,S.A.
IRETAND
SMC Pneumatics (lreland) Ltd.
Asia
JAPAN
SMC
Corporation
KOBEA
SMC Pneumatics Korea Co., Ltd.
CHINA
SMC
(China)
Co.,Ltd.
HONG
KONG
SMCPneumatics
(HongKong)Ltd.
SINGAPORE
SMCPneumatics
(S.E.A.)
Pte.
Ltd.
PHILIPPINES
SMC
Pneumatics
(Philippines),
Inc.
MALAYSIA
SMC
Pneumatics
(S.E.A.)
Sdn.Bhd.
TAIWAN
SMGPneumatics (Taiwan)Co., Ltd.
THAILAND
SMCThailand Ltd.
INDIA
SMC Pneumatics (lndia) Pvt., Ltd.
North America
CANADA
SMC Pneumatics (Canada)Ltd.
MEXICO
SMC Pneumatics (Mexico) S.A. de C.V.
South America
AFGENTINA
SMC
Argentina
S.A.
CHILE
SMCPneumatics
(Chile)
Ltda.
Oceania
AUSTRALIA
SMC Pneumatics (Australia) Pty.Ltd.
NEWZEALAND
SMC Pneumatics (N.2.)Ltd.
SMCoffers
thesame
quality
andengineeringexpertise
in many
other
pneumatic
components
Valves
DirectionalControl
Valves
ManualValves
Mufflers
ExhaustCleaners
Quick
ExhaustValves
Valves
ProoortionalValves
MechanicalValves
MiniatureValves
Fluid
Valves
Cylinders/Actuators
Compact
Cylinders
Miniature
Cylinders
Rodless
Cylinders
Rotary
Actuators
Pneumatic
Grippers
Vacuum
Vacuum
Ejectors
Vacuum
Accessories
Instrumentation
Pneumatic
Positioners
Pneumatic
Transducers
AirPreparation
Equipment
Filters-Regulators-Lubricators
CoalescingFilters
MicroMist
SeDarators
Fittings
AirFiftings
SMC
Pneumatics
Inc.
P.O.Box26640,Indianapolis,lN 46226
Tel:
(317)
899-4440.FAX:
(317)
899-3102
O 1978-1999SMCPneumatics,
Inc.AllRightsReserved.
RevisedOctober
1999