SMC Networks ASP Series User manual

Model
Specifications
Flow Rate and Sonic Conductance
ASP330F-01
ASP430F-02
ASP530F-03
ASP630F-04
ASP430F-F02
ASP530F-F03
ASP630F-F04
ASP330F-N01
ASP430F-N02
ASP530F-N03
ASP630F-N04
R 1/8
R 1/4
R 3/8
R 1/2
R 1/4
R 3/8
R 1/2
NPT 1/8
NPT 1/4
NPT 3/8
NPT 1/2
Model Port size
Applicable tubing O.D.
Metric size Inch size
Fluid
Proof pressure
Max. operating pressure
Min. operating pressure
Pilot check valve operating pressure
Ambient and fluid temperature
Applicable tubing material
Air
1.5 MPa
1 MPa
0.1 MPa
More than 50% the operating pressure (Over 0.1 MPa)
–5 to 60°C (No freezing)
Nylon, Soft nylon, Polyurethane
Note) Use caution regarding the max. operating pressure when soft nylon or polyurethane tubing is used.
(Refer to pages 411 and 412 for details.)
ø 6 ø 8 ø 10 ø 12 ø 1/4 " ø 5/16" ø 3/8 " ø 1/2"
Note) Brass parts are all electroless nickel plated.
Pilot port
M5 x 0.8
Rc 1/8
Rc 1/8
Rc 1/4
G 1/8
G 1/8
G 1/4
10-32 UNF
NPT 1/8
NPT 1/8
NPT 1/4
Example of drop prevention circuit
Made to Order
Lubricant: Vaseline X12
Speed Controller with Pilot Check Valve
with One-touch Fitting
Series ASP
Pilot check valve and speed con-
troller are combined.
Realizes momentary intermediate
stoppage of a cylinder and able to
adjust speed control of it.
Tubing mount direction is 360°free.
Electroless nickel plated is provided
as standard.
RoHS
Work
piece
Note) Flow rate values are measured at 0.5 MPa and 20°C.
Model
Tubing O.D.
Controlled
flow
Free flow
Metric size
Inch size
Flow rate
(L/min(ANR))
ASP330F
ASP430F ASP530F ASP630F
180
0.58
0.15
0.25
0.15
0.25
0.15
0.25
0.15
0.25
ø6, ø8
330
1.04
ø6
—
ø1/4"
ø5/16"
350
1.08
ø10 ø12
ø5/16" —
600 750 1100 1190
1.86 2.32 3.4 3.68
ø8 ø8 ø10
ø 1/4"
ø5/16 "ø3/8" ø3/8" ø1/2"
Controlled flow
Free flow
Critical
pressure
ratio
Sonic conductance
dm3/(s⋅bar)
Symbol
617
AS
TMH
ASD
AS
AS-FE
KE
AS-FG
AS-FP
AS-FM
AS-D
AS-T
ASP
ASN
AQ
ASV
AK
VCHC
ASS
ASR
ASQ
ASP

Note) The flow characteristics are representative values.
ASP 3
3
4
5
6
1/8 standard
1/4 standard
3/8 standard
1/2 standard
Body size
Universal
Pilot check valve
Port size
With seal
Symbol
01
02
03
04
F02
F03
F04
N01
N02
N03
N04
Cylinder side
R 1/8
R 1/4
R 3/8
R 1/2
R 1/4
R 3/8
R 1/2
NPT 1/8
NPT 1/4
NPT 3/8
NPT 1/2
Applicable tubing O.D. Note)
Metric size
Note) For applicable tubing O.D. selection,
refer to the Model on page 617.
Inch size
06
08
10
12
ø6
ø8
ø10
ø12
07
09
11
13
ø1/4"
ø5/16"
ø3/8"
ø1/2"
ASP330F ASP430F
ASP530F ASP630F
200
05 10
100
400
05 10
100
200
300
06
07,08,09
1500
05 10
500
10
11,12,13
1000
05 10
500
1000
10,11
08,09
3 0 F 01 06 S
With One-touch fitting
Pilot port
M5 x 0.8
Rc 1/8
Rc 1/8
Rc 1/4
G 1/8
G 1/8
G 1/4
10-32 UNF
NPT 1/8
NPT 1/8
NPT 1/4
Made to Order
Lubricant: Vaseline
X12
Ex.) ASP330F-01-06S-X12
Lock nut option
Nil
J
Hexagon lock nut
Round lock nut
Series ASP
How to Order
Needle Valve/
Flow Characteristics
Number of needle rotations
Inlet pressure : 0.5 MPa Inlet pressure : 0.5 MPa
Inlet pressure : 0.5 MPa Inlet pressure : 0.5 MPa
Flow rate (L/min (ANR))
Number of needle rotations
Flow rate (L/min (ANR))
Flow rate (L/min (ANR))
Number of needle rotations
Flow rate (L/min (ANR))
Number of needle rotations
618

dT1 D1
R 1/8
R 1/4
R 3/8
R 1/2
6
8
6
8
8
10
10
12
11.6
15.2
12.8
15.2
15.2
18.5
18.5
20.9
Metric Size
T2
M5 x 0.8
1/8
1/8
1/4
H1
12
17
19
24
H2
8
12
12
17
D2
14.2
18.5
23
28.6
D3
41.7
46.9
64.8
L4 (1)
Max. Min.
Model
ASP330F-01-06S
ASP330F-01-08S
ASP430F-02-06S
ASP430F-02-08S
ASP530F-03-08S
ASP530F-03-10S
ASP630F-04-10S
ASP630F-04-12S
L1
14
15.8
18
19.7
20.3
23.1
25.9
L2
38.4
44.7
43.4
46.4
51.3
54.1
64.2
66
L3
22.9
28.2
25.2
28.2
28.2
32.6
32.6
34.4
39.6
38.9
36.7
41.9
57.3
34.6
33.9
11.8
15
19.8
26.5
L5
38.6
48.2
55.1
69.4
A1 (2)
35.2
42.4
50
61.8
A2 (2)
10.5
10.9
14.4
18.3
M
13.7
18.7
16.8
18.7
18.7
20.8
20.8
21.8
Weight
(g)
32
35
65
68
107
110
212
215
dT1 D1
NPT 1/8
NPT 1/4
NPT 3/8
NPT 1/2
1/4"
5/16"
1/4"
5/16"
5/16"
3/8"
3/8"
1/2"
13.2
15.2
13.2
15.2
15.2
18.5
18.5
21.7
Inch Size
T2
10-32 UNF
NPT 1/8
NPT 1/8
NPT 1/4
H1
1/2"
11/16"
19
15/16"
H2
8
1/2"
1/2"
11/16"
D2
14.2
18.5
23
28.6
D3
41.7
46.9
64.8
L4 (1)
Max. Min.
Model
ASP330F-N01-07S
ASP330F-N01-09S
ASP430F-N02-07S
ASP430F-N02-09S
ASP530F-N03-09S
ASP530F-N03-11S
ASP630F-N04-11S
ASP630F-N04-13S
L1
20.3
23.1
25.9
26.5
L2
42.2
44.7
43.9
46.4
51.3
54.1
64.2
66.3
L3
25.6
28.2
25.6
28.2
28.2
32.6
32.6
34.7
38.9
36.7
41.9
57.3
33.9
11.8
15
19.8
26.5
L5
38.6
48.2
55.1
69.4
A1 (2)
35.1
42.6
50.3
61.8
A2 (2)
10.5
10.9
14.4
18.3
M
17
18.7
17
18.7
18.7
20.8
20.8
21.8
Weight
(g)
107
116
220
230
35
68
Note 1) Reference dimensions
Note 2) Reference dimensions of R thread after installation.
Note 1) Reference dimensions
Note 2) Reference dimensions of NPT thread after installation.
15.8
18
L2
L3
M
L1
L5
A1∗
A2∗
øD3
øD1
øD2
L5
T2
T1
L4
Applicable tubing O.D. ød
L2
L3
M
L1
A1∗
A2∗
øD3
øD1
øD2
T2
T1
L4
Applicable tubing O.D. ød
H1
(Hexagon width across flats)
H2
(Hexagon width across flats)
H1
(Hexagon width across flats)
H2
(Hexagon width across flats)
Series ASP
Speed Controller with Pilot Check Valve
with One-touch Fitting
Dimensions
619
AS
TMH
ASD
AS
AS-FE
KE
AS-FG
AS-FP
AS-FM
AS-D
AS-T
ASP
ASN
AQ
ASV
AK
VCHC
ASS
ASR
ASQ
ASP

Note 1) The round lock nut is electroless nickel plated.
Note 2) The round lock nut is made of brass. However, note that only the
ASP330F and ASP430F use steel.
Component Parts
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Body A
Elbow body
Handle
Pilot body
Body B
Needle
Needle guide
Guide
Lock nut
Piston
Valve
Cover
U seal
Material
PBT
PBT
PBT
Brass
Brass
Brass
Brass
Brass
Steel (2)
Brass
Stainless steel, NBR
Brass
HNBR
Note
Electroless nickel plated
Electroless nickel plated
Electroless nickel plated
Electroless nickel plated
Electroless nickel plated
Zinc chromated (1)
Electroless nickel plated
Electroless nickel plated
Description No.
14
15
16
17
18
19
20
21
22
23
24
25
Material
NBR
NBR
Stainless steel
Stainless steel
—
NBR
—
NBR
NBR
NBR
NBR
Stainless steel
Note
Description
DY seal
DY seal
Spring
Spring
Cassette
Seal
Spacer
O-ring
O-ring
O-ring
O-ring
Ring
Component Parts
e
oy
@4
!7 !1
!0
i
!2
w @0 !9 !8
@5
@3
r
!5 !6 !4 @2
!3
q
t
u
@1
Series ASP
Construction
620

Series ASP
Specific Product Precautions
Be sure to read before handling. Refer to front matter 56 for Safety Instructions
and pages 468 to 471 for Flow Control Equipment Precautions.
Design/Selection
Warning
1. This product cannot be used for accurate and
precise intermediate stops of the actuator.
Due to the compressibility of air as a fluid, the actuator will
continue to move until it reaches a position of pressure
balance, even though the pilot check valve closes with an
intermediate stop signal.
2. This product cannot be used to hold a stop position
for an extended period of time.
Pilot check valves and actuators are not guaranteed for zero
air leakage. Therefore, it is sometimes not possible to hold a
stop position for an extended period of time. In the event that
holding for an extended time is necessary, a mechanical
means for holding should be devised.
3. Consider the release of residual pressure.
Actuators may move suddenly due to residual pressure, which
can be dangerous during maintenance procedures.
4. When used in a balance control circuit, there are
instances in which the check valve cannot release,
even though the pilot pressure is 50% of the operat-
ing pressure. In these cases, the pilot pressure
should be the same as the operating pressure.
5. For reference, SMC has conducted endurance tests
in which ON, OFF operation of the check valve was
performed at the maximum operating pressure,
with a confirmed endurance of 10 million opera-
tions.
Since the tests were performed under limited condi-
tions, use caution in evaluating the results.
6. The check valve has a construction, in which it is
closed by the differential pressure generated when
the inlet pressure (IN side) or outlet pressure (OUT
side) solenoid valve is switched. Be aware that the
check valve does not close completely and the
outlet pressure (OUT side) may drop when the inlet
pressure (IN side) drops gently and the differential
pressure becomes smaller than the minimum oper-
ating pressure or cracking pressure.
Installation
Warning
1. When mounting, please firmly align the tool with
the hexagon width across flats of the pilot body. If
the hexagon width across flats is damaged as a
result of failure to properly align the tool, the pilot
body will be deformed, and poor pilot operation
may result.
Air source
Warning
1. If moisture enters the inside of the connecting
piping, the cover may corrode, and it may lead to a
pilot operation malfunction.
621
AS
TMH
ASD
AS
AS-FE
KE
AS-FG
AS-FP
AS-FM
AS-D
AS-T
ASP
ASN
AQ
ASV
AK
VCHC
ASS
ASR
ASQ
ASP
A