SMC Networks 7804WBRB - annexe 1 User manual

SMC7804WBRB
54MbpsWireless Broadband Router
with built-in (Annex B-UR2) ADSL Modem
Model Number:SMC7804WBRB
Issue:March 2004
Quick Installation Guide
Installationskurzanleitung
Guide d'installation rapide
Guía de inicio rápido
Guida rapida all'avvio
Snabbinstallation
Beknopte installatiehandleiding
Manual de instalação rápida
54Mbps Wireless Broadband Router with built-in (Annex B-UR2) ADSL Modem
Wireless-Breitband-Router (54 MBit/s) mit eingebautem ADSL-Modem (AnnexB-UR2
Routeur sans fil haut débit 54Mbps avec modem ADSL intégré (Annexe AnnexB'-UR2)
Router de banda ancha con acceso inalámbrico de 54 Mbps y módem ADSL (Anexo B-UR2) integrado
Router a banda larga wireless 54 Mbps con modem ADSL (Appendice B incorporato
Trådlös bredbandsrouter på 54 Mbit/s med inbyggt ADSL-modem (Annex B-UR2)
54Mbps draadloze breedbandrouter met ingebouwde (Annex B-UR2) ADSL-modem
Router de Banda Larga Sem Fios de 54 Mbps com Modem ADSL integrado (Anexo B-UR2)

The SMC ADSL BarricadeTMg, SMC7804WBRB is a 54Mbps Wireless
Broadband Router with built-in (AnnexB-UR2) ADSL Modem. This
product is designed to share Internet Access, provide security,
and network multiple devices for a variety of users. The
SMC7804WBRB’s simple installation and setup can be carried
out by the least experienced users, while providing networking
professionals with easy to configure advanced features. Please
read the User Guide for advanced features of this product.
English
2
Contents
1
Introduction
English 2 - 49
Deutsch 50 - 97
Français 98 - 145
Español 146 - 193
Italiano 194 - 243
Svenska 244 - 289
Nederlands 290 - 337
Português 338 - 385
Compliances & Information 386 - 390
Contents

Before proceeding with the installation of your SMC7804WBRB,
please be sure you have the following:
• ADSL line installed by your ISP.
• ADSL Micro filter/Splitter.
• A computer equipped with a 10/100Mbps Network Adapter
or an IEEE802.11g wireless network adapter.
• TCP/IP network protocols installed on each PC that will
access the Internet.
• A Java enabled web browser such as Microsoft Internet
Explorer 5.0 or above installed.
• Your Windows CD, if your computer is running Windows 95,
98, or Me.
English
4
Installation Requirements
English
3
Package Contents
• One ADSL BarricadeTM g.
• One Power Adapter.
• One CD with Complete Documentation.
• One Category 5 Fast Ethernet Cable.
• One Telephone patch cable (RJ-11).
• Splitter is provided (NL models only).
• Telephone Connector Kit (NL model only).

PWR On The BarricadeTM is receiving
power. Normal operation.
Off Power off or failure.
ADSL Sync On ADSL connection is syncronized.
Flashing The Barricade is establishing an
DSL link.
Off ADSL connection is not established.
ADSL Data Flashing The indicated ADSL port is sending
or receiving data.
WLAN Off No data is being transferred.
Flashing The WLAN port is sending or
receiving data.
Ethernet On Ethernet connection is established.
(4LEDs)
Flashing The indicated LAN port is sending
or receiving data.
Off There is no LAN connection on
the port.
6
English
The front panel of the SMC7804WBRB includes LED indicators
for easy monitoring.
The following table defines the function of each LED.
Connecting Devices
1. Connect computers directly to the SMC7804WBRB on ports 1-4
on the rear panel. If you have more than 4 computers to plug
in, connect a hub or a switch and connect additional computers
to that device. To connect wirelessly refer to the User Guide for
your wireless adapter.
2. Connect supplied RJ-11 cable from ADSL Micro filter/Splitter
tothe ADSL WAN port on the SMC7804WBRB.
3. Plug the power cord into the power jack.
Hardware
LAN Ports Reset Button WAN Port
Power inlet
English
5
LED Status Description

7
Step 1. Configure TCP/IP Settings
After you have completed the hardware setup by connecting your
devices, you need to configure your computer to connect to your
SMC7804WBRB.
1. From the Windows
desktop, click the
[Start] button. Choose
[Settings], then click
[Control Panel].
English
8
Configuring Your Computer
English
This Quick Installation Guide provides configuration instructions
for Windows 95, 98, Me, NT 4.0, 2000 and XP, and for Macintosh
OS 7.x and above. Please be sure that you are following the
instructions that correspond to your operating system:
• Configuring Your Computer with Windows 95/98/Me.
• Configuring Your Computer with Windows 2000.
• Configuring Your Computer with Windows XP.
• Configuring Your Computer with Windows NT 4.0.
• Configuring Your Macintosh Computer.
Configuring your computer with Windows 95/98/Me
You may find that the instructions here do not exactly match your
version of Windows. This is because these steps and screenshots
were created from Windows 98. Windows 95 and Windows Me are
very similar, but not identical, to Windows 98.

2. From [Control Panel], double-click the [Network] icon.
3. In the [Network] window, under the [Configuration] tab,
double click [TCP/IP] in the list of your network card.
4. Select the [IP Address] tab.
If [Obtain an IP address automatically] is already selected, your
computer is already configured for DHCP. Click [Cancel] to close
each window, and skip to Step 2 Disable HTTP Proxy.
5. Click [Obtain an IP address automatically].
English
English
910
2

English
12
6. Click the [Gateway] tab and
remove any numbers listed under
[Installed gateways].
7. Click the [DNS Configuration] tab
and click [Disable DNS].
8. Click [OK].
9. Windows may need your
Windows 95/98/Me CD to
copy some files. After it finishes
copying, it will then prompt
you to restart your
system. Click [Yes] and
your computer will shut
down and restart.
English
11
2Configuration
Step 2. Disable HTTP Proxy
You will need to verify that the HTTP Proxy feature of your Web
browser is disabled so that your Web browser is able to view the
configuration pages inside your SMC7804WBRB. The following steps
are for Internet Explorer and for Netscape. Determine which
browser you use and follow the appropriate steps.
Internet Explorer
1. Open Internet Explorer and click the [Stop] button.
Click [Tools], then [Internet Options].

14
13
2. In the [Internet Options]
window click the [Connections]
tab. Next, click the [LAN
Settings…] button.
3. Clear all the checkboxes.
4. Click [OK] and then click [OK]
again to close the [Internet Options] window.
Netscape
1. Open Netscape and click the
[Stop] button. Click [Edit],
then click [Preferences…].
2. In the [Preferences] window, under [Category], double-click
[Advanced], then click [Proxies]. Select [Direct connection
to the Internet]. Click [OK].
3. Repeat these steps
for each Windows
95/98/Me computer
connected to your
SMC7804WBRB
English
English

16
15
Step 3. Obtain IP Settings from Your SMC7804WBRB
Now that you have configured your computer to connect to
your SMC7804WBRB, you have to obtain new network settings.
By releasing any old IP settings and renewing them with settings
from your SMC7804WBRB, you will also verify that you have
configured your computer correctly.
1. Click [Start], then [Run…].
2. Type WINIPCFG and
click [OK]. It may take
a minute or two for the
[IP Configuration] window
to appear.
3. From the drop-down menu, select your network card. Click
[Release] and then [Renew]. Verify that your IP address is now
192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your
Default Gateway is 192.168. 2.1. These values confirm that
your SMC7804WBRB is functioning. Click [OK] to close the
[IP Configuration] window.
Now that your computer is
configured to connect to your
SMC7804WBRB, please skip
to Configuring Your
SMC7804WBRB.
English
English

18
17
Configuring Your Computer with Windows 2000
Step 1. Configure TCP/IP Settings
After you have completed the hardware setup, you need to
configure your computer to connect to your SMC7804WBRB.
1. From the Windows
desktop, click the [Start]
button. Choose [Settings],
then click [Network and
Dial-Up Connections] icon.
2. Double-click the icon
that corresponds
to the connection
to your
SMC7804WBRB.
3. Click [Properties].
4. Double-click [Internet
Protocol (TCP/IP)].
English
English