Smith & Nephew RENASYS TOUCH User manual

RENASYS TOUCH – Quick Reference
(refer to the User Manual for full details on RENASYS TOUCH)
- To switch between Continuous and Intermittent therapy, ensure therapy is paused and press the therapy mode toggle on the home screen
Intermittent therapy home screen
Continuous therapy home screen
Step 1: Ensure that the device is powered on and
the Continuous therapy home screen is displayed
Step 2: Use the + or – buttons to select prescribed
pressure setting
Step 3: Press the Start/Pause therapy button to
start delivering therapy
When therapy is active the status indicator on top
of the device illuminates green and the therapy
indicator at the top of the screen will rotate orange
Step 1: Ensure that the device is powered on and
the Intermittent therapy home screen is displayed
Step 2: Change the High and Low pressure
settings and cycle times by selecting the setting
and use the + or – to the prescribed pressure/
time
Step 3: Press the Start/Pause therapy button to
start delivering therapy
When therapy is active the status indicator on top
of the device illuminates green and the therapy
indicator at the top of the screen will rotate orange
All 4 settings can be adjusted within the following pressure ranges:
High Therapy
25, 40, 50, 60, 70, 80, 90, 100, 120, 140, 160, 180, 200mmHg
High Cycle times: 3, 5, 8, 10 minutes
Low Therapy
0, 25, 40, 50, 60, 70, 80, 90, 100, 120, 140, 160, 180mmHg
Low Cycle times: 2, 3, 5, 8, 10 minutes
3. Starting therapy (Intermittent)
2. Starting therapy (Continuous)
1. Switching the device between Continuous and Intermittent therapy
Therapy mode toggle
Therapy mode toggle
Therapy set point
Status indicator Status indicator
Increase value
Start/Pause therapy
Decrease value

RNPE-41-0816-UE
Customer Care Center
1-800-876-1261
T 727-392-1261
F 727-392-6914
Smith & Nephew, Inc.
Fort Worth, TX
USA
©2016 Smith & Nephew, Inc. All rights reserved. ™Trademark of Smith & Nephew.
Supporting healthcare professionals for over 150 years QUESTIONS?
CALL NPWT CLINICAL AND PRODUCT SUPPORT LINE,
VIA CUSTOMER CARE AT 1-800-876-1261
www.smith-nephew.com
www.renasys-npwt.com
For detailed product information, including the indications for use,
contraindications, precautions and warnings, please consult the product’s
Instructions for Use (IFU) prior to use.
4. Checking for a seal
6. Switching the device between Patient and Clinician mode
Step 1: Press the yellow settings
button to access the settings screen
Step 2: Press the change mode
option from the menu
Step 3: Select which mode
(Clinician/Patient) required
Step 4: Please enter the password
(3141) and press the green tick to
switch modes
Step 5: Press yellow button on screen
twice to return to the home screen
5. Locking the screen
Follow on screen seal checking instructions. Once seal is
achieved the screen will display “seal achieved” and then
display “delivering therapy”
Look for “raisin-like” appearance
Listen for a “hissing” sound, indicating a leak
Feel the dressing, which should be hard to the touch
Possible site of leak
•Wrinkleorcrease
•Skinfoldorcrevice
•Wheredrainexitslm(whereapplicable)
Intervention
 Seallmedgeswithlmdressing
If hole found in Transparent Film, patch with adhesive
Transparent Film.
The Lock function locks the touchscreen and Start/Pause therapy icon – Power icon is not locked.
The status indicator continues to illuminate green to indicate the device is still delivering therapy
When delivering therapy, the screen will go dark.
To view screen, press either Play or Lock pad button.
In the event of an alarm, the device will automatically
unlock and the Alarm screen will display.
The device will automatically lock and enter Sleep
mode after 5 minutes without user interaction.
Lock/Unlock
Status indicator