SMITH SYSTEM DESK FENCE User manual

b a
e
g
h
c d
f
i
800-328-1061
www.smithsystem.com AUG 2011
If you have damaged or missing components please contact customer service.
PART NUMBER: 001700
DESK FENCE SCREEN SUB-ASSEMBLY
QTY PER UNIT: 1
PART NUMBER: 001725
DESK FENCE POLE KIT WITH HARDWARE
QTY PER UNIT: 1
Contents of Desk Fence Pole Kit
with Hardware:
2 Pole Weldments a.
2 Clamps w/ Weldnuts b.
2 Binding Posts c.
2 Binding Post Screws d.
4 Long Set Screws e.
4 Short Set Screws f.
2 Hex Keys (Allen Keys) g.
2 Spanner Plates h.
8 Screws i.
DESK FENCE INSTRUCTION SHEET
PARTS LIST

A
DETAIL A
rear screen
side screen
CONFIGURATIONS
EDGE-MOUNTED
Creates a barrier along the back edge
or side edge of the desk
HALF-MOUNTED
Creates a barrier along the center of the desk,
creating two separate workspaces.
L-MOUNTED
(qty 2 units req'd)
Creates a barrier along the rear edge and
a side edge to create a "carrel" effect.
TALL-MOUNTED
By flipping the desk screen upside-down
in any of these configurations, you can
create a taller barrier of up to 17.5" above
the work surface.
*use inner mounting holes of pole tabs*
Clamps are optional
*use center
mounting holes of pole tabs*
Clamps are optional
*use inner
mounting holes of pole tabs for the rear screen*
*use outer mounting hole of the corner "shared" pole
tabs for the side screen (See Detail A)
*use the inner mounting hole of the front pole for
the side screen
Clamps are optional
AUG 2011
If you have damaged or missing components please contact customer service.
800-328-1061
www.smithsystem.com

1
3
2
Step 1: Fit the projected boss of the desk fence screen between the two welded
tabs of each pole. Align the hole of the projected boss with one of the tab holes.
Step 2: Insert the Binding Post into one of the holes of the top tab and also pass the
binding post through the projected boss of the desk fence screen.
Step 3: Use the binding post screw to secure the screen to the pole. Pass the binding
post screw through the aligning hole of the bottom tab. Fasten securely using a
Phillips drive screwdriver.
PROJECTED BOSS
1. BUILD YOUR DESK FENCE
AUG 2011
800-328-1061
www.smithsystem.com
If you have damaged or missing components please contact customer service.

4 fastening locations
per pole.
2. SECURE THE DESK FENCE TO THE WORK SURFACE
OPTION A: PERMANENT FASTENING - FASTEN THE DESK FENCE TO THE WORK SURFACE
USING SCREWS
Using the 8 screws included in the hardware pack of the pole kit, you can fasten the desk
fence to your work surface. There are 4 fastening locations per pole.
OPTION B: RECONFIGURABLE - CLAMP THE DESK FENCE TO THE WORK SURFACE
Using the clamps and set screws included in the hardware pack of the pole kit, you can
clamp the desk fence to your work surface.
*use the long set screws for a 3/4" thick top
** use the short set screws for a 1-1/4" thick top
AUG 2011
800-328-1061
www.smithsystem.com
If you have damaged or missing components please contact customer service.

B
Isometric View
DETAIL B
desk 1
desk 2
clamp
set screws spanner plate
C
Front View
Top View
DETAIL C
clamp
pole
set screw
work
surface
spanner plate
desk 1
desk 2
SPANNER PLATE
If you would like to use the desk fence to span two desks, (2 desks, sharing 1 fence)
use the two spanner plates included in the hardware pack.