SMITH SYSTEM 01350 User manual

If you have damaged or missing component, please contact customer service
800-328-1061
Form# 179837 www.smithsystem.com 02/2013
Arc Desk Quick Installation Guide
(Model#: 01350, 01351, 01352, 01353)
Replacement pack 69729 includes:
(4) 70867- Connector Bolt ¼-20X23mm
(4) 70871- Connector Nut ¼-20X17mm
(2) 77813- Allen Wrench 3/16”
(17) 70054- SM Screw #10X3/4
#10 Wood Screw
(Qty. 17)
P/N-70054
3/8” – Dog Nut Screw
(Qty. 4)
P/N-77741
Connector Bolt (Qty. 4 of each)
P/N-70867- Connector Bolt
P/N-70871- Connector Nut
Back Panel
(Qty. 1)
Allen Wrench 3/16”
(Qty. 2)
P/N-77813
Adjustable Y Legs
(Qty. 2)
Arc Desk Table Top
(Qty. 1)

If you have damaged or missing component, please contact customer service
800-328-1061
Form# 179837 www.smithsystem.com 02/2013
Arc Desk Assembly Instructions
Step 1: Loosely attach the legs and the modesty panel with (4) Connector Bolts (finger tight) (See
Drawing 1A).
Step 2: Flip the table over on a smooth, clean surface with the bottom facing up.
Step 3: Align the frame assembly with the pilot holes and use (14) Wood Screws to loosely attach to the
top (See Drawing 1B)
Step 4: Go back and tighten the frame assembly.
Step 5: Tighten the screw to secure the legs to the table top.
Step 6: Once the legs are securely attached, adjust the legs to the desired height using the Allen Wrench
provided (See Drawing 1C).
Drawing 1A
Drawing 1B
Drawing 1C