SMITH SYSTEM Nomad 21676 User manual

For assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 1-800-328-1061. You may also place your order online at
Form#179984 www.smithsystem.com 11/2015
21676 Nomad
Assembly Instructions

For assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 1-800-328-1061. You may also place your order online at
Form#179984 www.smithsystem.com 11/2015
Components and Hardware List
Part#: L43801
Library Column
(Qty. of 2)
Part#: 17554
4” Dual-Wheel Caster
Pack (Qty. of 4)
Part#: 21295
Flat Shelves (Qty. of 4)
Part#: 21298
Flat Base Shelves
(Qty. of 2)
Part#: 74104
Library Spacer Support
(Qty. of 3)
Part#: 74119
Library/Nomad
Hardware Pack
Part#: 77640
Flat Bottom Brackets
(Qty. of 4)
Part#: 77641
Flat Top Brackets
(Qty. of 4)
Part#: 78903
End Panels (Qty. of 2)
Part#: 78918
Top Panel

For assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 1-800-328-1061. You may also place your order online at
Form#179984 www.smithsystem.com 11/2015
Assembly Instructions
Step 1: Attach the 4” Dual-Wheel Casters to the bottom of the Library Columns. Ensure
that the casters are fully tightened and secure. (If casters are not fully tightened,
the unit may get damaged or may not roll correctly)
Step 2: Attach both Library Spacer Supports to the Library Columns using the connector
bolts and nuts from the hardware pack. The Nomad, at this point, should look
like the unit pictured below.
Step 3: Mount one of the Flat Top Brackets (hook-side facing in) to the pre-drilled End
Panel using wood screws from the hardware pack. Hang the End Panel with the
attached Flat Top Bracket from the top of the Library Column. Attach the Flat
Top Bracket on the other side of the same End Panel. Hang the Flat Bottom
Brackets from the slots in the bottom of the Library Column. Fasten the Flat
Bottom Brackets to the End Panel with wood screws from the hardware pack.
Repeat the process for the other end of the Nomad. The Nomad, at this point,
should look like the unit pictured below.

For assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 1-800-328-1061. You may also place your order online at
Form#179984 www.smithsystem.com 11/2015
Step 4: Position the Top Panel, with the pre-drilled holes facing downward and
centered, between the End Panels and on top of the Flat Top Brackets. Fasten
the Top Panel to the Flat Top Brackets using wood screws from the hardware
pack. The Nomad, at this point, should look like the unit pictured below.
Step 5: Locate both Flat Base Shelves. Attach the two end brackets to the shelf for both
shelves. Place both fully assembled Flat Base Shelves at the bottom of both
columns by inserting the tabs on the end of the shelves into the slots of the
columns. The image below details the process of assembling and installing the
Flat Base Shelves.
-

For assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 1-800-328-1061. You may also place your order online at
Form#179984 www.smithsystem.com 11/2015
Step 6: Flat Shelves are assembled in the same manner as Flat Base Shelves - by
attaching the end brackets to each shelf. Grasp the shelf by each bracket and
insert the tabs into the slots of the column at the desired height. The image
below shows how the shelf should seat onto the columns.