SNUGSQUARE JORN SIDE TABLE User manual

JORN SIDE TABLE

Gather Your Eggs...
8x Bolts
Left Leg
Back
Lower Shelf
Table Top
Right Leg
Note: Please retain all boxes until you are certain that your product isn’t damaged and that you
do not wish to return it. Disposal of boxes may prevent/delay our ability to resolve your request.
Drill + Extension
Hex Bit with Ball End

Step 1: Attach Bottom Shelf to Back Panel
Next, take the bottom shelf
with the pockets facing out
and align the rear mounting
holes with the corresponding
holes on the back panel.
Insert bolts into the mounting
holes and tighten.
Start by placing the back panel with the
pocket side up on a soft surface so that
you don’t damage your peice.

Step 2: Attach First Leg
Lay out the first leg with the
mounting holes facing up.
Align the mounting holes
on the bottom shelf with the
corresponding holes on the leg.
Insert 2 bolts through the mounting
holes and tighten.
Rotate the table around and screw in
1 bolt through the back panel pocket.

Step 3: Attach Second Leg
Step 4: Place Top
Repeat the previous directions
to attach the second leg.
Flip side table base on
feet, and place on the
removable table top.
DONE!