socomec SIRCO MOT PV User manual

www.socomec.com
SIRCOMOT PV
Motorised photovoltaic switches
EN
InstructIon
Manual

2EN SIRCOMOTPV - 543544B - SOCOMEC
1. GENERAL SAFETY INSTRUCTIONS .......................................................5
2. GENERAL OVERVIEW ......................................................................6
2.1. PRODUCT INTRODUCTION.................................................................6
2.2. PRODUCT IDENTIFICATION ................................................................7
2.3. ENVIRONMENTAL .........................................................................8
2.3.1. IP RATING............................................................................8
2.3.2. OPERATING CONDITIONS .............................................................8
2.3.3. STORAGE CONDITIONS ..............................................................8
2.3.4. VOLUME AND SHIPPING WEIGHTS BY REFERENCE SIRCO MOT PV ....................9
2.3.5. CE MARKING.........................................................................9
2.3.6. LEAD FREE PROCESS ................................................................9
2.3.7. EMC STANDARD.....................................................................10
2.4. SIRCO MOT PV ACCESSORIES AVAILABLE ................................................10
2.4.1. CUSTOMER FITTED ACCESSORY .....................................................10
2.4.2. FACTORY FITTED ACCESSORY .......................................................10
3. INSTALLATION .............................................................................11
3.1. PRODUCT DIMENSIONS ..................................................................11
 ......................................11
 .....................................12
 ....................................................13
3.2. COPPER BAR CONNECTION FOR SIRCO MOT PV 3200 A ...................................14
3.3. MOUNTING ORIENTATION.................................................................14
3.4. ASSEMBLY OF CUSTOMER MOUNTED ACCESSORIES ......................................15
3.4.1. CONNECTION KITS FOR SIRCO MOT PV 3200 A .......................................15
3.4.2. TERMINAL SHROUDS ................................................................16
3.4.3. TERMINAL SCREENS ................................................................16
.........................................................................................16
3.4.4. INTER-PHASE BARRIERS.............................................................17
3.4.6. RAISED MOUNTING SPACERS ........................................................18
 .......................................18
3.5. FACTORY FITTED ACCESSORY ............................................................19
3.5.1. PADLOCKING KEY INTERLOCKS ......................................................19
3.5.2. ADDITIONAL AUXILIARY CONTACTS...................................................19
4. CONNECTIONS ............................................................................20
4.1. POWER CIRCUITS ........................................................................20
4.2. CONNECTION CONFIGURATION ...........................................................20
4.3. CABLE OR BAR CONNECTIONS ...........................................................22
4.3.1. POWER CONNECTION TERMINALS ...................................................22
4.4. CONTROL CIRCUITS......................................................................22
EN CONTENTS

3
EN
SIRCOMOTPV - 543544B - SOCOMEC
www.socomec.com
To download, brochures, catalogues and technical manuals.
This manual is available for download in French and English.
 .....................................................22
 .......................................23
5. OPERATING MODES.......................................................................24
5.1. MANUAL OPERATION .....................................................................25
5.1.1. EMERGENCY MANUAL OPERATION ...................................................25
5.1.2. PADLOCKING .......................................................................25
5.2. ELECTRICAL OPERATION .................................................................26
5.2.1. POWER SUPPLY.....................................................................26
5.2.2. FIXED INPUTS ......................................................................26
5.2.3. FIXED OUTPUTS - DRY CONTACTS....................................................28
6. TROUBLE SHOOTING GUIDE .............................................................30

4EN SIRCOMOTPV - 543544B - SOCOMEC

5
EN
SIRCOMOTPV - 543544B - SOCOMEC
1. GENERAL SAFETY INSTRUCTIONS
• This instruction manual must be made accessible so as to be easily available to anyone who may need to
read it in relation with the SIRCOMOTPV.
• The SIRCOMOTPV meets the European Directives governing this type of product and includes CE marking
on each product.
• No covers on the SIRCOMOTPV should be opened (with or without voltage) as there may still be dangerous
voltages inside the product such as those from external circuits.
• DonothandleanycontrolorpowercablesconnectedtotheSIRCOMOTPVwhenvoltagemaybe
presentontheproductdirectlythroughthemainsorindirectlythroughexternalcircuits.
• Voltages associated with this product may cause injury, electric shock, burns or death. Prior to carry out any
maintenance or other work on live parts or other parts in the vicinity of exposed live parts, ensure that the
switch including all control and associated circuits are de-energized.
DANGER WARNING CAUTION
RISK:
Electric shock, burns, death
RISK:
Possible personal injury
RISK:
Equipment damage
• As a minimum the SIRCOMOTPV comply with the following international standards:
- CEI 60947-3
- IS 13947-3
- EN 60947-3
- NBN EN 60947-3
- BS EN 60947-3
The information provided in this instruction manual is subject to change without notice, remains for general
information only and is non-contractual.

6EN SIRCOMOTPV - 543544B - SOCOMEC
2. GENERAL OVERVIEW
2.1. Product introduction
1
6
7
8
9
111213141516
17
2 43 5
10
1. Power Section : multipolar load break switch (3 or 4 poles)
2. Load break switch terminals
3. Switch position indication window :- I (On) – O (Off)
4. Back-plate mounting SIRCOMOTPV xing lugs
5. Auxiliary power supply : 230Vac (208 – 277Vac ± 20%)
6. Motorized Control Unit
7. Motor housing
8. Green LED Indication : Power (SIRCO MOT PV control voltage input within specied range).
9. Auto / Manual mode selector switch
10. Emergency manual operation “Direct Handle”
11. Red LED Indication : Product Unavailable / Manual Mode / Fault Condition
12. Padlocking facility (Up to 3 padlocks of dia. 4 – 8mm)
13. Output contacts x 3 (Position indication I-O and product availability outputs)
14. Input contacts x 4 : Position order I-O - Remote control enable - Override controls and force to Off position
15. Sliders for Terminal Shields
16. Fixing holes for terminal Shields
17. Emergency manual operation shaft location (Accessible only in manual mode)

7
EN
SIRCOMOTPV - 543544B - SOCOMEC
2.2. Product identication
1
5
67
2 43
1. Main motorised switch identication label :
Electrical characteristics
Applicable standards and
Terminal incoming and outgoing wiring details.
2. Complete SIRCO MOT PV product current rating and reference number label (serial number, barcode and CE marking)
3. Emergency manual operation direction of rotation indication label
4. Auxiliary power supply contacts identication label
5. Motor barcode and serial number
6. Output contacts identication label
7. Input contacts identication label

8EN SIRCOMOTPV - 543544B - SOCOMEC
2.3. Environmental
The SIRCOMOTPV product meets the following environmental requirements:
2.3.1. IP Rating ø 1 mm
• IP2X against direct contact for the SIRCOMOTPV motorization control unit.
• IP2X against direct contact for the power section with the connections in place and when including suitable,
correctly installed incoming and outgoing terminal shields.
• IP 0 for the bare power section without terminal shields in place.
2.3.2. Operating Conditions
2.3.2.1. Temperature
• From -20 to +40°C without derating
• From -20 to +70°C when applying a Kt derating correction factor
Kt: Correction Factor Temperature
0.9 40 °C … 50 °C
0.8 50 °C … 60 °C
0.7 60 °C … 70 °C
* Simplied derating method: Ithu ≤ Ith x Kf
* A more precise calculation may be done for specic applications. Should this be required please contact SOCOMEC.
2.3.2.2. Hygrometry
• 80% humidity without condensation at 55°C
• 95% humidity without condensation at 40°C
2.3.2.3. Altitude
• Up to 2000m in altitude without derating
• For higher altitude the Ka correction factors below apply
Ka: Correction Factor 2000m < A ≤ 3000m 3000m < A ≤ 4000m
Ue 0.95 0.8
Ie 0.85 0.85
2.3.3. Storage Conditions
2.3.3.1. Temperature
• From -40 to +70°C

9
EN
SIRCOMOTPV - 543544B - SOCOMEC
2.3.3.2. Storage duration period
• Maximum storage up to a period of 12 months
• (Recommendation: To be stored in dry, non corrosive and non saline atmospheric conditions)
2.3.3.3. Storage position
≤ 800 A: a maximum of 3 boxes may be stocked vertically
≥ 1000 A: a maximum of 1 box may be stocked vertically
≤ 800 A ≥ 1000 A
2.3.4. Volumeandshippingweightsbyreference SIRCO MOT PV
Frame Size Rating N° of
Poles
Reference
Number
Weight (kg) Volume (cm)
inc Packing
Net Gross
B4 250 A 4 19PV 4025
400 A 4 19PV 4038
B5
400 A 4 19PV 4039
400 A 4 19PV 4040
630 A 4 19PV 4063
800 A 4 19PV 4080
B6 1000 A 4 19PV 4100
1250 A 4 19PV 4120
B7 1600 A 4 19PV 4160
2000 A 4 19PV 4200
B8 3200 A 4 19PV 4320
2.3.5. CE marking
The SIRCOMOTPV complies the with the European directive for:
• The Electromagnetic compatibility no. 2004/108/CE dated 15th of December 2004.
• Low voltage directive no. 2006/95/CE dated 12th of December 2006.
2.3.6. Lead free process
• The SIRCOMOTPV complies with the European directive for RoHS.

10 EN SIRCOMOTPV - 543544B - SOCOMEC
2.3.7. EMC standard
The SIRCOMOTPV is designed and built in accordance with IEC 60947-1 standards
(Products intended to be installed in an «Industrial, Commercial and/or Residential Environment» therefore respecting
both Class A as well as Class B EMC requirements).
Description Std (IEC) Requirement (criteria)
Conducted CISPR 11 Class B
Radiated CISPR 11 Class B
ESD contact 61000-4-2 4KV (B)
ESD air 61000-4-2 8KV (B)
Electromagnetic field 61000-4-3 10V/m (A)
RF Conducted 61000-4-6 10V (A)
Burst 61000-4-4 2KV (A) power
1KV (A) control
Surge Common 61000-4-5 2KV (A)
Surge differential 61000-4-5 1KV (B)
2.4. SIRCO MOT PV ACCESSORIES AVAILABLE
2.4.1. 
TERMINAL SHROUDS (250 TO 800 A)
Incoming and outgoing protection against direct contact with
the connection terminals or parts.
Can be mounted top or bottom.
TERMINAL SCREENS
Incoming and outgoing protection against direct contact with
the connection terminals or parts.
DOOR ESCUTCHEON PLATE
An accessory to be xed onto a cabinet door to frame the
motor part of ush mounted SIRCOMOTPV switches.
CONTROL VOLTAGE TRANSFORMER
Allows a standard 230 V AC device to be supplied with
400VAC.
MOUNTING SPACERS (250 TO 800 A)
Raises the device’s terminals 10 mm away from the
backplate or frame.
Others:
Refer to the end of this instruction manual or the latest
SOCOMEC product catalogue.
(Downloadable from www.socomec.com)
2.4.2. 
SUPPLEMENTARY AUXILIARY CONTACT (AC)
Pre-breaking and signaling of positions I: 1 additional auxiliary
contact NO / NC can be mounted. Included as standard
for ratings from 3200A. For Low level AC: please consult
SOCOMEC.
RONIS KEY PADLOCKING
Locking of the electrical and manual operation by means of
a RONIS EL11AP lock. Possibility of locking in all positions, if
the “Padlocking in the 2 positions” option is ordered.
Not compatible with ush mounting.
PADLOCKING IN 2 POSITIONS
Allows locking of the operation in the 2 positions I and 0.

11
EN
SIRCOMOTPV - 543544B - SOCOMEC
3. INSTALLATION
3.1. Product dimensions
3.1.1. 
10
W
U
M
J
XT TT 11
C
H
Z2
10.5 Y
85
F
Ø7
Ø9
A
140
V
223
=
Fix. 180
Fix. 180 Fix. 195
Fix. 195 BA CACA
AA
101
AC
=
1
2
3
4
6
50.5
20
138
101
5
CA
W
U
1. Padlocking Facility: Locking bracket for up to 3 padlocks of dia. 4 – 8mm
2. Emergency manual operation: Maximum operating radius with an operating angle of 90°
3. Mounting stand off with spacer accessory
4. Phase Barriers
5. Flush mounting cutout dimensions for front door
6. Emergency removable handle
CAUTION To consider the space required for manual operation and wiring.

Rating(A) Overalldimensions Terminal
shrouds Switchmounting Connection
A 4p. CAC F 4p. HJ 4p. J1 M 4p. T U V W X 4p. YZ2 AA BA CA
250/B4 395 244 280 378 153 245 35 210 50 25 30 11 33 3.5 134.5 160 130 15
400/B4 395 244 280 378 153 245 35 210 50 35 35 11 33 3.5 134.5 170 140 15
400/B5 459 321 400 437 221 304 34 270 65 45 50 13 37.5 5190 260 220 20
630/B5 459 321 400 437 221 304 34 270 65 45 50 13 37.5 5190 260 220 20
800/B5 459 321 400 437 221 304 34 270 65 45 50 13 37.5 5190 260 220 20
All dimensions in mm.

12 EN SIRCOMOTPV - 543544B - SOCOMEC
3.1.2. 
33 8.58.5
50
3310
ø 9
ø 15
svr_077_a_1_x_cat
16 x 11
60
28.5 15.7515.75
28.515
svr_078_b_1_x_cat
1250 A
15
55
12.5
25 25
30
30
45
45
90
ø12.5
svr_098_a_1_x_cat
1600 A - 2000 A1000 A
F
12.5
=
207
166
9
280
166
V
=
250
AA
12.5
291.5
191
153.5
94
21
Y
X
M 51.5
J
TTT
B
AC
U
50.5
20
138
150
1
2
3
4
5
6
1. Padlocking Facility: Locking bracket for up to 3 padlocks of dia. 4 – 8mm
2. Emergency manual operation: Maximum operating radius with an operating angle of 90°
3. Terminal screens
4. Phase Barriers
5. Flush mounting cutout dimensions for front door
6. Emergency removable handle
CAUTION To consider the space required for manual operation and wiring.

Rating(A)
Overall
dimensions Terminalshrouds Body Switch
mounting Connection
BAC F 4p. J 4p. M 4p. T U V X Y Z1 AA
1000/B6 370 461 584 387 335 80 50 60.5 60 766.5 321
1250/B6 370 461 584 387 335 80 60 65 60 766.5 330
1600/B7 380 531 716 519 467 120 90 44 66 867.5 288
2000/B7 380 531 716 519 467 120 90 44 66 867.5 288
Toutes les dimensions sont en mm.

13
EN
SIRCOMOTPV - 543544B - SOCOMEC
3.1.3. 
50.5
20
138
150
330
250
380
125
M 51.5
A
258
9
461
53.5 120120120
821
58
94
358
257
44
219,5
1
3
24
5
6
50.5
20
138
150
330
250
380
125
M 51.5
A
258
9
461
53.5 120120120
848
58
94
328
277,5
44
1
3
24
5
6
15
55
12.5
25 25
30
30
45
45
90
ø12.5
1. Padlocking Facility: Locking bracket for up to 3 padlocks of dia. 4 – 8mm
2. Emergency manual operation: Maximum operating radius with an operating angle of 90°
3. Terminal screens
4. Phase Barriers
5. Flush mounting cutout dimensions for front door
6. Emergency removable handle
CAUTION To consider the space required for manual operation and wiring.

Rating(A) Overalldimensions Switchmounting
A 4p. M 4p.
3200/B8 716 467
Toutes les dimensions sont en mm.

14 EN SIRCOMOTPV - 543544B - SOCOMEC
3.2. Copper bar connection for SIRCO MOT PV 3200 A
129
155
74
37
129
155
74
37
129
155
74
37
129
155
74
37
3.3. Mounting orientation
250A to 800A Recommended OK Not Allowed OK
1000A to 3200A Recommended Not Allowed OK OK
CAUTION Always install the product on a flat and rigid surface.

15
EN
SIRCOMOTPV - 543544B - SOCOMEC
3.4. Assembly of customer mounted accessories
DANGER Never handle any customer mounted accessories while there may be the risk of
voltage being or becoming present.
3.4.1. Connection kits for SIRCO MOT PV 3200 A
Version*
n°
Maximal
current without
downgrading(1)
Minimum Cu bar
section(1)
+ + 708 lb-in 80 Nm
fncluded with 3200A
product as standard
708 lb-in
80 Nm
708 lb-in
80 Nm Washer
MOY.M M12
NFE 25 511
H M12
3Cu 2619 1200 2629 1200 2639 1200
01 2500 A 2 x 100 x 10 - - - H M12-35 6.8 - 6 x 12 x 6 x
02 2500 A 2 x 100 x 10 H M12-55 6.8 - 3 x 6 x 3 x
03 2500 A 2 x 100 x 10 H M12-55 6.8 - 5 x 10 x 5 x
04 3200 A 3 x 100 x 10 - - H M12-35 6.8 - 3 x 3 x -
05 3200 A 3 x 100 x 10 - - H M12-45 6.8 - 3 x 6 x -
06 2900 A 3 x 100 x 10 H M12-65 6.8 - 3 x 6 x 3 x
07 3200 A 4 x 100 x 10 - - H M12-45 6.8 - 6 x 6 x -
08 3200 A 3 x 100 x 10 H M12-65 6.8 - 5 x 10 x 5 x
Note : Max Cu bar width - 100 mm. Reference numbers and quantity given above are for one connection and per pole. For a full set multiply the
quantity indicated by the number of poles (3 or 4 pole)
(1) Conditions of use of these products may lead to a derating.
I th = 3200 A3
4P
19PV 4320
Version 01 Version 04Version 02 Version 03
Version 05 Version 08Version 06 Version 07

16 EN SIRCOMOTPV - 543544B - SOCOMEC
3.4.2. Terminal shrouds
Available from 250A to 800A. Upstream or downstream mounting.
250A/B4 to 800A/B5.
Notcompatiblewithbridgingbars
andphasebarriers!
3.4.3. Terminal screens
250A/B4 and 400A/B4

17
EN
SIRCOMOTPV - 543544B - SOCOMEC
400A/B5 to 2000A/B7
3200A/B8
3.4.4. Inter-phase barriers
OOFF
-

18 EN SIRCOMOTPV - 543544B - SOCOMEC
3.4.6. Raised mounting spacers
Available from 250 to 800A.1 set including 2
spacers raises the device’s terminals 10mm
away from the bottom of the enclosure or frame
on which the device is mounted. These may
also be used to replace the original mounting
spacers.
3.4.7. 
Power Transformer intended for 400VAC, Phase to Phase voltage applications that do not provide the availability of
a neutral conductor. Transformer data: 400VAC – 230VAC: 200VA.
301
+
-
302
230 Vac
12Vdc
301 302
230 Vac
400Vac
301
+
-
302
230 Vac
24Vdc
DC power supply available in 12Vdc as well as 24Vdc intended to allow a standard SIRCOMOTPV (250-1600A) to
be powered from an appropriate DC supply. (Usually the battery of the backup generator source).
This converter is to be positioned as close as possible to the DC power source.
301
+
-
302
230 Vac
12Vdc
301 302
230 Vac
400Vac
301
+
-
302
230 Vac
24Vdc
301
+
-
302
230 Vac
12Vdc
301 302
230 Vac
400Vac
301
+
-
302
230 Vac
24Vdc

19
EN
SIRCOMOTPV - 543544B - SOCOMEC
3.5. Factory tted accessory
3.5.1. Padlocking key interlocks
Intended for locking the electrical control and the backup control in position 0 using a RONIS EL11AP lock. As
standard, key locking is in the 0 position.
Optionally and when including the option “padlocking in 2 positions” key locking will be in positions I, 0.
250Ato800A 1000Ato3200A
3.5.2. Additional auxiliary contacts
ntended for pre breaking and signaling of positions I. Up to 2 additional NO/NC auxiliary contacts can be tted.
82
92or
84
94
81
91
Pos I
81
81 82 84 91 92 94
Pos I Pos I
82 84 91 92 94
250Ato800A(Optional) 1000Ato2000A(Optional)
3200A(Standard)

20 EN SIRCOMOTPV - 543544B - SOCOMEC
4. CONNECTIONS
4.1. Power circuits
Note for all ratings: Take into account the connection cable lengths and/or others environmental specic operating
conditions.
250 A 400 A 400 A 630 A 800 A 1000 A 1250 A 1600A 2000 A 3200 A
Frame size B4 B5 B6 B7 B8
Maximum cables section Cu (mm2)120 240 240 2x185 2x240 2x240 2x240 6x185 - -
Maximum bars width Cu (mm) 32 32 50 50 50 63 63 100 100 100
Tightening torque min./max (Nm) 20/26 20/26 40/45 40/45 40/45 40/45 40/45 40/45 40/45 40/45
4.2. Connection conguration
19PV 4025
19PV 4038
Use only with
400A/B4
19PV 4040
19PV 4063
19PV 4080
19PV 4100
19PV 4120
19PV 4160 19PV 4200