Sole Fitness E55 User manual

E55 /E95 ELLIPTICAL OWNER’S MANUAL
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW ELLIPTICAL

TABLE OF CONTENTS
1
2
3
4
4
7
14
19
20
23
28
30
31
ATTENTION
THIS ELLIPTICAL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THE
APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS ENTIRETY.
Product Registration
Important Safety Instructions
Important Electrical Information
Important Operation Instructions
Transport Instructions
E55 Assembly Instructions
E95 Assembly Instructions
Elliptical Features
Operation of Your New Elliptical
Programmable Features
Using Heart Rate Monitor
General Maintenance
Manufacturer’s Limited Warranty

E55 / E95 ELLIPTICAL1
Thank you for your purchase of this quality elliptical trainer from SOLE. Your new elliptical has been
manufactured by one of the leading tness manufacturers in the world and is backed by one of the
most comprehensive warranties available. SOLE will do all we can to make your ownership
experience as pleasant as possible for many years to come.
If you have any questions about your new product or questions about the warranty contact SOLE
Fitness at 1-866-780-SOLE (7653). If you have a technical problem with your new elliptical contact
SOLE technical service at 866-MYSOLE1 (697-6531).
Please take a moment at this time to record below the name of the dealer, their telephone number,
and the date of purchase for easy contact in the future. We appreciate your condence in SOLE and
we will always remember that you are the reason that we are in business. Please complete and mail
your registration card today and enjoy your new elliptical.
Yours in Health,
SOLE Fitness
CONGRATULATIONS ON YOUR NEW ELLIPTICAL AND WELCOME TO THE SOLE FAMILY!
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this tness product
in the space provided below.
Serial Number
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to SOLE.
You can also go to www.soleellipticals.com under the support tab to register online.
Name of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT REGISTRATION
E55_E95_20111027

2E55 / E95 ELLIPTICAL
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your SOLE elliptical from the electrical
outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, re, electric shock, or injury to persons, install
the elliptical on a at level surface with access to a 110-volt, 15-amp grounded outlet with only
the elliptical plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE
OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING
IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET.
A serious shock or re hazard may result along with computer malfunctions. See Grounding Instructions, page 4.
Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both carpet
and elliptical may result.
Keep children away from the elliptical. There are obvious pinch points and other caution
areas that can cause harm.
Keep hands away from all moving parts.
Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working
properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the o position, remove tether cord, then remove the plug
from the outlet.
Do not attempt to use your elliptical for any purpose other than for the purpose it is
intended.
The hand pulse sensors are not medical devices. Various factors, including the user’s move-
ment, may aect the accuracy of heart rate readings. The pulse sensors are intended only as
exercise aids in determining heart rate trends in general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
your elliptical. Quality athletic shoes are recommended to avoid leg fatigue.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
IMPORTANT SAFETY INSTRUCTIONS

E55 / E95 ELLIPTICAL3
WARNING!
NEVER remove any cover without rst disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your elliptical may be
aected. Such conditions are not covered under your warranty. If you suspect the voltage is
low, contact your local power company or a licensed electrician for proper testing.
NEVER expose this elliptical to rain or moisture. This product is NOT designed for use outdoors,
near a pool or spa, or in any other high humidity environment. The operating temperature
specication is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing
(no water drops forming on surfaces).
IMPORTANT ELECTRICAL INSTRUCTIONS
GROUNDING INSTRUCTIONS
This product must be grounded. If the elliptical should malfunction or breakdown, ground-
ing provides a path of least resistance for electric current, reducing the risk of electric shock.
This product is equipped with a cord having an equipment-grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualied electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the
product if it will not t the outlet; have a proper outlet installed by a qualied electrician.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like
the plug illustrated below. A temporary adapter that looks like the adapter illustrated below
may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded
outlet is not available. The temporary adapter should be used only until a properly grounded
outlet, (shown below) can be installed by a qualied electrician. The green colored rigid ear-lug,
or the like, extending from the adapter, must be connected to a permanent ground such as a
properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a
metal screw.

4E55 / E95 ELLIPTICAL
NEVER operate this elliptical without reading and completely understanding the results of
any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your desired
speed on the computer console and release the adjustment key. The computer will obey the
command gradually.
NEVER use your elliptical during an electrical storm. Surges may occur in your household
power supply that could damage elliptical components. Unplug the elliptical during an elec-
trical storm as a precaution.
Use caution while participating in other activities while walking on your elliptical; such as
watching television, reading, etc. These distractions may cause you to lose balance or stray
from walking in the center of the belt; which may result in serious injury.
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to function
properly with little nger pressure. Pushing harder is not going to make the unit go faster
or slower. If you feel the buttons are not functioning properly with normal pressure contact
your SOLE dealer.
IMPORTANT OPERATION INSTRUCTIONS
POWER CONNECTOR - FRONT, LEFT SIDE OF UNIT
TRANSPORT INSTRUCTIONS
The elliptical is equippped with two transport wheels which are engaged when
the rear of the elliptical is lifted.

E55 / E95 ELLIPTICAL5
E55 /95 ASSEMBLY PACK CHECKLIST
HARDWARE STEP 1
1
#181. 3/8” x 23 x 2T
Curved Washer (2 pcs)
#170. 5/16” x 20 x 1.5T
Flat Washer (4 pcs)
#164. 3/8” x 19 x 1.5T
Flat Washer (2 pcs)
#157. 3/8” x 7T
Nylon Nut (2 pcs)
#141. M5 x 10mm
Phillips Head Screw (4 pcs)
#180. 3/8” x 2T
Split Washer (1 pc)
#132. 3/8” x 3/4”
Hex Head Bolt (2 pcs)
#183. 5/16”
Star Washer (4 pcs)
#182. 5/16” x 1.5T
Split Washer (4 pcs)
#133. 3/8” x 1-1/2”
Hex Head Bolt (2 pcs)
#135. 5/16” x 2-1/4”
Hex Head Bolt (4 pcs)
#125. 3/8” x 2-1/4”
Hex Head Bolt (1 pcs)

6E55 / E95 ELLIPTICAL
HARDWARE STEP 2
2
#165. 3/8” x 30mm
Flat Washer (2 pcs)
#175. 25mm
Wave Washer (4 pcs)
#132. 3/8” x 3/4”
Hex Head Bolt (2 pcs)
#142. 3.5 x 12mm
Sheet Metal Screw (8 pcs)
HARDWARE STEP 3
3
#170. 5/16” x 20 x 1.5T
Flat Washer (2 pcs)
#159. 5/16” x 7T
Nylon Nut (2 pcs)
#134. 5/16” x 1-1/4”
Hex Head Bolt (2 pcs)
HARDWARE STEP 4
4
#142. 3.5 x 12mm
Sheet Metal Screw (10 pcs)
#139. M5 x 15mm
Phillips Head Screw (29 pcs)
#145. M6 x 10mm
Phillips Head Screw (4 pcs)
#75. Grommet
(2 pcs)
#24
Bracket (2 pcs)

E55 / E95 ELLIPTICAL7
#186. Phillips Head Screwdriver
ASSEMBLY TOOLS
#185. Short Phillips Head Screwdriver
#187. 12/14mm Wrench #184. 13/14mm Wrench
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along
the dotted Line. Lift Box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing
parts. If damaged parts are found, or parts are missing, contact your dealer
immediately.
3. Locate the hardware package. Remove the tools rst. Remove the hardware
for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing
for reference.
PRE-ASSEMBLY
E55 /95 ASSEMBLY INSTRUCTIONS