SOMFY animeo EIB / KNX 4 AC Motor Controller WM/ DRM 220-240V... Quick start guide

animeo 4 AC Motor Controller WM/ DRM 220-240V AC
The animeo EIB / KNX 4 AC Motor Controller WM/ DRM 220-240V AC is designed to control four individual configurable
motor outputs for Venetian blinds, roller shutters, screens, awnings or windows. Local push button inputs can be
used as conventional push buttons or as universal binary EIB inputs. The four outputs can also be controlled by using
the animeo RTS radio plug in module.
BENEFITS AND PRODUCT FEATURES:
- Practical installation benefits which reduce the installation time, e.g. spring connectors, cable tension release, …
- A group input can be used to control all four outputs independent of ETS programming.
- Single fuse protection per motor output.
- The device can be used basically without the need to be programmed by the ETS software.
- Max. 8 local push button inputs can be used as universal EIB binary inputs to connect for example window contacts,
temperature sensors or presence detectors. A conventional push button can also be used in order to realise dimming
functions in combination with lighting actuators.
- User friendly and intuitive configuration via the ETS parameter cards.
- Intelligent switching between manual and automatic functions to provide excellent user comfort and powerful energy
saving functions.
- Position feedback of each motor output during move and when reaching the UP and DOWN end limits
- Two free configurable security levels per motor output.
- Free configurable action at mains power return.
- Automatic cascading of the motor outputs to limit the peak current in case of mains power return and bus safety
functions.
- Plug and play! The motor outputs can also be controlled via the Somfy RTS radio technology by using the animeo
RTS radio plug in module at any time without additional wiring.
- In cases where radio technology is not allowed, e.g. in hospitals, the motor outputs can also be controlled with
the animeo Infrared module!
Ref. : 1 860 114 Ref. : 1 860 116
Wall Mounted DIN Rail
Possible upgrade
Local control with
Radio Technology Somfy®
EIB Moco230V EN 060401 24/05/06 10:59 Page 1

WIRING DIAGRAM: animeo EIB / KNX 4 AC Motor Controller WM/ DRM 220-240V AC
CHARACTERISTICS:
The 4AC Motor Controller animeo EIB / KNX is an electronic, indpendently mounted control with looped-through PE connection.
SOMFY SAS, capital 20.000.000 euros, RCS Bonneville 303.970.230- ©SOMFY.COM060401 - 5046115
4 AC Motor Controller Ref. 1 860 114 Ref.: 1 860 116
Supply voltage 220-240VAC / 50/60 Hz 220-240VAC / 50/60 Hz
Supply voltage from EIB Bus EIB-voltage 21…30VDC, SELV EIB-voltage 21…30VDC, SELV
Rated current consumption EIB as per EIB/ KNX guidelines as per EIB/ KNX guidelines
Stand-by current (primary) 26 mA @ 230V 26 mA @ 230V
Max. motor current consumption 4 x 3,15 A, cos_ =0,95 4 x 3,15 A, cos_ =0,95
Supply voltage of group control input SELV, 16VDC = SELV, 16VDC =
Supply voltage of local push buttons SELV, 16VDC = SELV, 16VDC
Terminals Spring connectors Spring connectors
Terminal EIB EIB bus terminal (black/red) EIB bus terminal (black/red)
Running time per output (Relay contact) max. 5 minutes max. 5 minutes
Fuse per output 4 x 3,15 AH 4 x 3,15 AH
Operating temperature 0°C to 45°C 0°C to 45°C
Relative humidity 85% 85%
Material of housing CC-ABS Polycarbonat CC-ABS Polycarbonat
Housing dimensions 180 x 255 x 63mm 90 x 210 x 63mm (12TE)
Degree of protection IP20 IP20
Protection class II, corrosponding to the installation II, corrosponding to the installation
Automatic action Typ 1.C micro interruption Typ 1.C micro interruption
Pollution degree 2 2
Rated impulse voltage 4 kV 4 kV
Temperature of ball pressure test 75°C 75°C
Conformity CE by EN 60730-1:2000 CE by EN 60730-1:2000
EIB Moco230V EN 060401 24/05/06 10:59 Page 2