Sonoma Wicker Chair Set 71SRRWK38 User manual

Page 1/3
PART LIST QUANTITY
A1 PC
B1 PC
C5 PCS + 1 PC
D5 PCS + 1 PC
E5 PCS + 1 PC
F1 PC
G1 PC
ASSEMBLE ON A FLAT, PROTECTED SURFACE.
STYLE #:
71SRRWK38
FIGURE
DESCRIPTION
FLAT WASHER
BOLT CAP
ALLEN WRENCH
CHAIR
SAVE THESE INSTRUCTIONS
BACK SKIRT
BOLT
(Φ8X16MM)
SONOMA WICKER CHAIR SET ASSEMBLY INSTRUCTIONS
CUSHION

Page 2/3
ASSEMBLY INSTRUCTIONS (CONTINUED)
71SRRWK38STYLE #:
STEP 1
A. PLACE CHAIR (A) UPSIDE DOWN AS SHOWN ON A
FLAT, PROTECTED SURFACE.
B. CONNECT BACK SKIRT (B) TO CHAIR (A) AT BACK
CONNECTION FIRST WITH BOLT (C) AND FLAT
WASHER (D) USING ALLEN WRENCH (F). DO NOT
TIGHTEN COMPLETELY.
STEP 2
A. CONNECT BACK SKIRT (B) TO CHAIR (A) AT FRONT
CONNECTIONS WITH BOLTS (C) AND FLAT WASHERS
(D) USING ALLEN WRENCH (F). DO NOT TIGHTEN
COMPLETELY.
B. TIGHTEN COMPLETELY ALL BOLTS (C) FROM
STEPS 1 & 2.
C. COVER BOLTS (C) WITH BOLT CAPS (E).

Page 3/3
CALL: 1-800-327-2978 9AM TO 5PM EST, Monday-Friday
EMAIL: [e-mail]
FOR REPLACEMENT PARTS OR FOR ADDITIONAL INFORMATION
CUSTOMER SERVICE
WASH FRAME WITH MILD SOLUTION OF SOAP AND WATER, RINSE WITH CLEAN WATER AND DRY THOROUGHLY.
CUSHIONS SHOULD BE SPOT CLEANED WITH A SOFT CLOTH.
CARE AND CLEANING
ASSEMBLY INSTRUCTIONS (CONTINUED)
STYLE #:
STEP 3
A. ROTATE ASSEMBLED CHAIR TO UPRIGHT
POSITION.
B. PLACE CUSHION (G) ON CHAIR SEAT.
C. ASSEMBLY IS COMPLETE.
** WE RECOMMEND THAT YOU SAVE THE ALLEN WRENCH (F) AND PERIODICALLY TIGHTEN ALL BOLTS
71SRRWK38
WARRANTY
1 YEAR LIMITED WARRANTY FOR FRAME, WEAVE AND CUSHIONS.
WHAT IS COVERED:
WE WARRANT TO THE ORIGINAL PURCHASER FOR ONE YEAR, FROM THE DATE OF PURCHASE, THAT THE FRAME, RESIN
WEAVE AND CUSHIONS WILL BE FREE FROM MANUFACTURING DEFECTS. THIS WARRANTY ALSO COVERS PEELING,
CRACKING, BLISTERING, DISCOLORATION, OR FADING FOR THIS ONE YEAR PERIOD.
WHAT IS NOT COVERED:
IT REMAINS THE CUSTOMER'S RESPONSIBILITY FOR FREIGHT AND PACKAGING CHARGES TO AND FROM OUR SERVICE
CENTER. THIS WARRANTY DOES NOT COVER COMMERCIAL USE, ACTS OF NATURE, FIRE, FREEZING, AND ABUSIVE USE.
DISCOLORATION OR FADING OF THE FINISH OR FABRICS AS A RESULT OF CHEMICALS OR SPILLS IS NOT COVERED.
GLASS TABLETOP BREAKAGE AND CORROSION OR RUSTING OF HARDWARE ARE NOT COVERED. IN ADDITION,
PURCHASED PARTS ARE NOT COVERED UNDER THIS WARRANTY. PROOF OF PURCHASE (DATED REGISTER RECEIPT) IS
REQUIRED FOR WARRANTY CLAIMS. WE RESERVE THE RIGHT TO MAKE SUBSTITUTIONS WITH SIMILAR MERCHANDISE,
IF THE MODEL IS NO LONGER IN PRODUCTION. WARRANTY IS TO THE ORIGINAL PURCHASER AND IS NOT
TRANSFERABLE. AS SOME STATES DO NOT ALLOW EXCLUSIONS OR LIMITATIONS ON AN IMPLIED WARRANTY, THE
ABOVE EXCLUSIONS AND LIMITATIONS MAY NOT APPLY. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
WEIGHT LIMIT
CHAIR: 300 LBS
DO NOT STAND OR CLIMB ON THE CHAIR.