Sonoma PRESIDIO 61SRR4510 User manual

Page 1/4
PART LIST QUANTITY
A1 PC
B1 PC
C1 PC
D1 PC
E4 PCS + 1 PC
F4 PCS + 1 PC
G4 PCS + 1 PC
H1 PC
I6 PCS + 1 PC
J6 PCS + 1 PC
K6 PCS + 1 PC
L1 PC
M1 PC
N1 PC
SAVE THESE INSTRUCTIONS
SONOMA PRESIDIO CHAIR
STYLE #:
61SRR4510
SEAT
BACK
ASSEMBLE ON A FLAT, PROTECTED SURFACE.
FIGURE
DESCRIPTION
LARGE BOLT
(Φ8X20MM)
LARGE WASHER
RIGHT ARM
LEFT ARM
SMALL BOLT
(Φ6X25MM)
SMALL WASHER
LARGE BALT CAP
LARGE ALLEN WRENCH
SEAT CUSHION
BACK CUSHION
SMALL BOLT CAP
SMALL ALLEN WRENCH

Page 2/4
STYLE #:
61SRR4510
STEP 1
A. PLACE RIGHT ARM (C) ON A FLAT, PROTECTED
SURFACE.
B. CONNECT SEAT (A) TO RIGHT ARM (C) WITH
LARGE BOLTS (E) AND LARGE WASHERS (F) USING
LARGE ALLEN WRENCH (H). DO NOT TIGHTEN
COMPLETELY.
STEP 2
A. CONNECT BACK (B) BY ALIGNING 2 BACK PINS
WITH THE HOLES ON RIGHT ARM (C) AND
INSERTING 2 SEAT PINS INTO HOLES ON BACK (B).
B. INSERT SMALL BOLTS (I) AND SMALL WASHERS
(J) THROUGH BACK (B) INTO SEAT (A) USING SMALL
ALLEN WRENCH (L). DO NOT TIGHTEN
COMPLETELY.
C. INSERT SMALL BOLTS (I) AND SMALL WASHERS
(J) THROUGH RIGHT ARM (C) INTO BACK (B) USING
SMALL ALLEN WRENCH (L). DO NOT TIGHTEN
COMPLETELY.
ASSEMBLY INSTRUCTIONS (CONTINUED)

Page 3/4
STEP 3
A. CONNECT LEFT ARM (D) BY INSERTING 2 BACK
PINS INTO HOLES IN LEFT ARM (D).
B. INSERT LARGE BOLTS (E) AND LARGE WASHERS
(F) USING LARGE ALLEN WRENCH (H). DO NOT
TIGHTEN COMPLETELY.
C. INSERT SMALL BOLTS (I) AND SMALL WASHERS
(J) THROUGH LEFT ARM (D) INTO BACK (B) USING
SMALL ALLEN WRENCH (L). DO NOT TIGHTEN
COMPLETELY.
D. COMPLETELY TIGHTEN ALL LARGE BOLTS (E) AND
SMALL BOLTS (I) USING LARGE ALLEN WRENCH (H)
AND SMALL ALLEN WRENCH (L).
E. COVER LARGE BOLTS (E) USING LARGE BOLT
CAPS (G).
F. COVER SMALL BOLTS (I) USING SMALL BOLT CAPS
(K).
STEP 4
A. ROTATE ASSEMBLED UNIT TO UPRIGHT
POSITION.
B. ADJUST LEG LEVELERS AS NEEDED SO THAT IT
SITS STABLE ON THE FLOOR.
ASSEMBLY INSTRUCTIONS (CONTINUED)
STYLE #:
61SRR4510

Page 4/4
CALL: 1-800-327-2978 9AM TO 5PM EST, Monday-Friday
ASSEMBLY INSTRUCTIONS (CONTINUED)
WARRANTY
300 LBS
CARE AND CLEANING
WASH FRAME WITH MILD SOLUTION OF SOAP AND WATER, RINSE WITH CLEAN WATER AND DRY THOROUGHLY.
STYLE #:
61SRR4510
WEIGHT LIMIT
STEP 5
A. PLACE SEAT CUSHION (M) AND BACK CUSHION
(N) ON THE CHAIR.
B. ASSEMBLY IS COMPLETE.
** WE RECOMMEND THAT YOU SAVE THE ALLEN WRENCH (H & L) AND PERIODICALLY TIGHTEN ALL BOLTS.
EMAIL: [e-mail]
1 YEAR LIMITED WARRANTY FOR FRAME, WEAVE AND CUSHIONS.
WHAT IS COVERED:
WE WARRANT TO THE ORIGINAL PURCHASER FOR ONE YEAR, FROM THE DATE OF PURCHASE, THAT THE FRAME,
RESIN WEAVE AND CUSHIONS WILL BE FREE FROM MANUFACTURING DEFECTS. THIS WARRANTY ALSO COVERS
PEELING, CRACKING, BLISTERING, DISCOLORATION, OR FADING FOR THIS ONE YEAR PERIOD.
WHAT IS NOT COVERED:
IT REMAINS THE CUSTOMER'S RESPONSIBILITY FOR FREIGHT AND PACKAGING CHARGES TO AND FROM OUR SERVICE
CENTER. THIS WARRANTY DOES NOT COVER COMMERCIAL USE, ACTS OF NATURE, FIRE, FREEZING, AND ABUSIVE USE.
DISCOLORATION OR FADING OF THE FINISH OR FABRICS AS A RESULT OF CHEMICALS OR SPILLS IS NOT COVERED.
GLASS TABLETOP BREAKAGE AND CORROSION OR RUSTING OF HARDWARE ARE NOT COVERED. IN ADDITION,
PURCHASED PART ARE NOT COVERED UNDER THIS WARRANTY. PROOF OF PURCHASE (DATED REGISTER RECEIPT) IS
REQUIRED FOR WARRANTY CLAIMS. WE RESERVE THE RIGHT TO MAKE SUBSTITUTIONS WITH SIMILAR MERCHANDISE,
IF THE MODEL IS NO LONGER IN PRODUCTION. WARRANTY IS TO THE ORIGINAL PURCHASER AND IS NOT
TRANSFERABLE. AS SOME STATES DO NOT ALLOW EXCLUSIONS OR LIMITATIONS ON AN IMPLIED WARRANTY, THE
ABOVE EXCLUSIONS AND LIMITATIONS MAY NOT APPLY. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
CUSTOMER SERVICE
FOR REPLACEMENT PARTS OR FOR ADDITIONAL INFORMATION
CUSHIONS SHOULD BE SPOT CLEANED WITH A SOFT CLOTH.
DO NOT STAND OR CLIMB ON THE CHAIR.