Sonoma PRESIDIO LOVESEAT 61SRR4505 User manual

Page 1/4
PART LIST QUANTITY
A1 PC
B1 PC
C1 PC
D1 PC
E4 PCS + 1 PC
F4 PCS + 1 PC
G4 PCS + 1 PC
H1 PC
I6 PCS + 1 PC
J6 PCS + 1 PC
K6 PCS + 1 PC
L1 PC
M2 PC
N2 PC
SAVE THESE INSTRUCTIONS
SONOMA PRESIDIO LOVESEAT
STYLE #:
61SRR4505
ASSEMBLE ON A FLAT, PROTECTED SURFACE.
FIGURE
DESCRIPTION
SEAT
BACK
RIGHT ARM
LEFT ARM
LARGE BOLT
(Φ8X20MM)
LARGE WASHER
LARGE BALT CAP
LARGE ALLEN WRENCH
SMALL BOLT
(Φ6X25MM)
SMALL WASHER
SMALL BOLT CAP
SMALL ALLEN WRENCH
SEAT CUSHION
BACK CUSHION

Page 2/4
STEP 1
A. PLACE RIGHT ARM (C) ON A FLAT, PROTECTED
SURFACE.
B. ATTACH SEAT (A) TO RIGHT ARM (C) WITH LARGE
BOLTS (E) WITH LARGE WASHERS (F) USING LARGE ALLEN
WRECH (H). DO NOT COMPLETELY TIGHTEN.
STEP 2
A. ATTACH BACK (B) BY ALIGNING 2 BACK PINS WITH THE
HOLES ON RIGHT ARM (C) AND INSERTING 2 SEAT PINS
INTO HOLES ON BACK (B).
B. INSERT SMALL BOLTS (I) AND SMALL WASHERS (J)
THROUGH BACK (B) INTO SEAT (A) USING SMALL ALLEN
WRENCH (L). DO NOT TIGHTEN COMPLETELY.
C. INSERT SMALL BOLTS (I) AND SMALL WASHERS (J)
THROUGH RIGHT ARM (C) INTO BACK (B) USING SMALL
ALLEN WRENCH (L). DO NOT TIGHTEN COMPLETELY.
ASSEMBLY INSTRUCTIONS (CONTINUED)
STYLE #:
61SRR4505

Page 3/4
STEP 3
ATTACH LEFT ARM (D) BY INSERTING 2 BACK PINS INTO
HOLES IN LEFT ARM (D).
B. INSERT LARGE BOLTS (E) AND LARGE WASHERS (F)
THROUGH SEAT (A) INTO LEFT ARM (D) USING LARGE
ALLEN WRENCH (H). DO NOT TIGHTEN COMPLETELY.
C. INSERT SMALL BOLTS (I) AND SMALL WASHERS (J)
THROUGH LEFT ARM (D) INTO BACK (B) USING SMALL
ALLEN WRENCH (L). DO NOT TIGHTEN COMPLETELY.
D. TIGHTEN COMPLETELY ALL LARGE BOLTS (E) AND
SMALL BOLTS (I) USING LARGE ALLEN WRENCH (H) AND
SMALL ALLEN WRENCH (L).
E. COVER LARGE BOLTS (E) USING LARGE BOLT CAPS (G).
F. COVER SMALL BOLTS (I) USING SMALL BOLT CAPS (K).
STEP 4
A. ROTATE ASSEMBLED UNIT TO UPRIGHT POSITION.
B. ADJUST LEG LEVELERS AS NEEDED SO THAT IT SITS
STABLE ON THE FLOOR.
ASSEMBLY INSTRUCTIONS (CONTINUED)
STYLE #:
61SRR4505

Page 4/4
CALL: 1-800-327-2978 9AM TO 5PM EST, Monday-Friday
ASSEMBLY INSTRUCTIONS (CONTINUED)
STYLE #:
61SRR4505
WEIGHT LIMIT
500 LBS
CARE AND CLEANING
WASH FRAME WITH MILD SOLUTION OF SOAP AND WATER, RINSE WITH CLEAN WATER AND DRY THOROUGHLY.
STEP 5
A. PLACE SEAT CUSHION (M) AND BACK CUSHION (N) ON
THE LOVESEAT.
B. ASSEMBLY IS COMPLETE.
** WE RECOMMEND THAT YOU SAVE THE ALLEN WRENCH (H & L) AND PERIODICALLY TIGHTEN ALL BOLTS
CUSTOMER SERVICE
FOR REPLACEMENT PARTS OR FOR ADDITIONAL INFORMATION
EMAIL: [e-mail]
CUSHIONS SHOULD BE SPOT CLEANED WITH A SOFT CLOTH.
DO NOT STAND OR CLIMB ON THE LOVESEAT.
WARRANTY
1 YEAR LIMITED WARRANTY FOR FRAME, WEAVE AND CUSHIONS.
WHAT IS COVERED:
WE WARRANT TO THE ORIGINAL PURCHASER FOR ONE YEAR, FROM THE DATE OF PURCHASE, THAT THE FRAME, RESIN WEAVE
AND CUSHIONS WILL BE FREE FROM MANUFACTURING DEFECTS. THIS WARRANTY ALSO COVERS PEELING, CRACKING,
BLISTERING, DISCOLORATION, OR FADING FOR THIS ONE YEAR PERIOD.
WHAT IS NOT COVERED:
IT REMAINS THE CUSTOMER'S RESPONSIBILITY FOR FREIGHT AND PACKAGING CHARGES TO AND FROM OUR SERVICE CENTER.
THIS WARRANTY DOES NOT COVER COMMERCIAL USE, ACTS OF NATURE, FIRE, FREEZING, AND ABUSIVE USE. DISCOLORATION OR
FADING OF THE FINISH OR FABRICS AS A RESULT OF CHEMICALS OR SPILLS IS NOT COVERED. GLASS TABLETOP BREAKAGE AND
CORROSION OR RUSTING OF HARDWARE ARE NOT COVERED. IN ADDITION, PURCHASED PART ARE NOT COVERED UNDER THIS
WARRANTY. PROOF OF PURCHASE (DATED REGISTER RECEIPT) IS REQUIRED FOR WARRANTY CLAIMS. WE RESERVE THE RIGHT TO
MAKE SUBSTITUTIONS WITH SIMILAR MERCHANDISE, IF THE MODEL IS NO LONGER IN PRODUCTION. WARRANTY IS TO THE
ORIGINAL PURCHASER AND IS NOT TRANSFERABLE. AS SOME STATES DO NOT ALLOW EXCLUSIONS OR LIMITATIONS ON AN
IMPLIED WARRANTY, THE ABOVE EXCLUSIONS AND LIMITATIONS MAY NOT APPLY. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.