Sonoma PRESIDIO User manual

PART LIST QUANTITY
A
1 PC
B
1 PC
C
1 PC
D
1 PC
E
4 PCS + 1 PC
F
4 PCS + 1 PC
G
4 PCS + 1 PC
H
1 PC
I
6 PCS + 1 PC
J
6 PCS + 1 PC
K
6 PCS + 1 PC
L
1 PC
M
2 PC
N
2 PC
SEAT
SAVE THESE INSTRUCTIONS
SONOMA PRESIDIO STATIONARY CHAIR ASSEMBLY INSTRUCTIONS
ASSEMBLE ON A FLAT, PROTECTED SURFACE.
FIGURE
DESCRIPTION
BACK
RIGHT ARM
LEFT ARM
LARGE BOLT
(Φ8X20MM)
LARGE WASHER
LARGE BOLT CAP
LARGE ALLEN WRENCH
SMALL BOLT
(Φ6X30MM)
SMALL WASHER
SMALL BOLT CAP
SMALL ALLEN WRENCH
SEAT CUSHION
BACK CUSHION
FOR MISSING OR INCORRECT PARTS/HARDWARE, CONTACT THE MANUFACTURER'S CUSTOMER SERVICE DIRECTLY AT
[email protected] OR 1-800-327-2978
REFER TO LAST PAGE FOR ADDITIONAL CUSTOMER SERVICE DETAILS.
Page 1/4

STEP 1
A. PLACE OUTER SIDE OF RIGHT ARM (C) ON A FLAT,
PROTECTED SURFACE.
B. ATTACH SEAT (A) TO RIGHT ARM (C) WITH LARGE
BOLTS (E) AND LARGE WASHERS (F) USING LARGE
ALLEN WRENCH (H). DO NOT TIGHTEN
COMPLETELY.
STEP 3
A. CAREFULLY ROTATE THE ASSEMBLED UNIT TO
THE UPSIDE DOWN POSITION.
B. INSERT 2 POSTS ON BACK (B) THROUGH HOLES
IN RIGHT ARM (C) CONNECTING WITH SMALL
BOLTS (I) AND SMALL WASHERS (J) USING SMALL
ALLEN WRENCH (L). DO NOT TIGHTEN
COMPLETELY.
ASSEMBLY INSTRUCTIONS (CONTINUED)
STEP 2
A. INSERT 3 POSTS ON SEAT (A) THROUGH HOLES
ON BACK (B) CONNECTING AT THE 2 OUTER POSTS
WITH SMALL BOLTS (I) AND SMALL WASHERS (J)
USING SMALL ALLEN WRENCH (L). DO NOT
TIGHTEN COMPLETELY.
SONOMA PRESIDIO STATIONARY CHAIR ASSEMBLY INSTRUCTIONS
Page 2/4

STEP 4
A. ROTATE ASSEMBLED UNIT ONTO OUTER SIDE OF
RIGHT ARM (C) ON A FLAT, PROTECTED SURFACE.
B. PLACE LEFT ARM (D) ONTO SEAT (A) AND BACK
(B) INSERTING 2 POSTS ON BACK (B) THROUGH
HOLES IN LEFT ARM (D). CONNECT WITH SMALL
BOLTS (I) AND SMALL WASHERS (J) USING SMALL
ALLEN WRENCH (L). DO NOT TIGHTEN
COMPLETELY.
C. ATTACH LEFT ARM (D) TO SEAT (A) WITH LARGE
BOLTS (E) AND LARGE WASHERS (F) USING LARGE
ALLEN WRENCH (H). DO NOT TIGHTEN
COMPLETELY.
D. TIGHTEN COMPLETELY ALL LARGE BOLTS (E) AND
SMALL BOLTS (I) USING LARGE ALLEN WRENCH (H)
AND SMALL ALLEN WRENCH (L).
E. COVER LARGE BOLTS (E) USING LARGE BOLT
CAPS (G).
STEP 5
A. ROTATE ASSEMBLED UNIT TO UPRIGHT
POSITION.
B. COVER SMALL BOLTS (I) WITH SMALL BOLT
CAPS (K).
C. ADJUST LEG LEVELERS AS NEEDED SO THAT IT
SITS STABLE ON THE FLOOR.
ASSEMBLY INSTRUCTIONS (CONTINUED)
SONOMA PRESIDIO STATIONARY CHAIR ASSEMBLY INSTRUCTIONS
Page 3/4

CALL: 1-800-327-2978 9AM TO 5PM EST, Monday-Friday
STEP 6
A. PLACE SEAT CUSHIONS (M) THEN BACK
CUSHIONS (N) ON THE LOVESEAT.
B. ASSEMBLY IS COMPLETE.
** WE RECOMMEND THAT YOU SAVE THE ALLEN WRENCHES (H & L) AND PERIODICALLY TIGHTEN ALL BOLTS.
ASSEMBLY INSTRUCTIONS (CONTINUED)
1 YEAR LIMITED WARRANTY FOR FRAME, WEAVE AND CUSHIONS.
WHAT IS COVERED:
WE WARRANT TO THE ORIGINAL PURCHASER FOR ONE YEAR, FROM THE DATE OF PURCHASE, THAT THE FRAME, RESIN
WEAVE AND CUSHIONS WILL BE FREE FROM MANUFACTURING DEFECTS. THIS WARRANTY ALSO COVERS PEELING,
CRACKING, BLISTERING, DISCOLORATION, OR FADING FOR THIS ONE YEAR PERIOD.
WHAT IS NOT COVERED:
IT REMAINS THE CUSTOMER'S RESPONSIBILITY FOR FREIGHT AND PACKAGING CHARGES TO AND FROM OUR SERVICE
CENTER. THIS WARRANTY DOES NOT COVER COMMERCIAL USE, ACTS OF NATURE, FIRE, FREEZING, AND ABUSIVE USE.
DISCOLORATION OR FADING OF THE FINISH OR FABRICS AS A RESULT OF CHEMICALS OR SPILLS IS NOT COVERED.
GLASS TABLETOP BREAKAGE AND CORROSION OR RUSTING OF HARDWARE ARE NOT COVERED. IN ADDITION,
PURCHASED PART ARE NOT COVERED UNDER THIS WARRANTY. PROOF OF PURCHASE (DATED REGISTER RECEIPT) IS
REQUIRED FOR WARRANTY CLAIMS. WE RESERVE THE RIGHT TO MAKE SUBSTITUTIONS WITH SIMILAR MERCHANDISE,
IF THE MODEL IS NO LONGER IN PRODUCTION. WARRANTY IS TO THE ORIGINAL PURCHASER AND IS NOT
TRANSFERABLE. AS SOME STATES DO NOT ALLOW EXCLUSIONS OR LIMITATIONS ON AN IMPLIED WARRANTY, THE
ABOVE EXCLUSIONS AND LIMITATIONS MAY NOT APPLY. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
WEIGHT LIMIT
300 LBS
CARE AND CLEANING
FRAME: CLEAN WITH MILD SOLUTION OF SOAP AND WATER, RINSE WITH CLEAN WATER, AND DRY THOROUGHLY.
SONOMA PRESIDIO STATIONARY CHAIR ASSEMBLY INSTRUCTIONS
CUSTOMER SERVICE
FOR REPLACEMENT PARTS OR FOR ADDITIONAL INFORMATION
EMAIL: [email protected]
CUSHIONS: SPOT CLEAN WITH A SOFT, DAMP CLOTH.
DO NOT STAND OR CLIMB ON THE CHAIR.
WARRANTY
Page 4/4