Sony CCP-8000 Series User manual

Multi Format Switcher System MVS-8000/8000SF System (With CCP-8000 Series)
Multi Format
Switcher System
MVS-8000/8000SF System
(With CCP-8000 Series Center Control Panel)
User’s Guide [English]
Volume 1
2nd Edition (Revised 3)
3-206-016-14 (1)
User’s Guide
Volume 1
2nd Edition (Revised 3)
[ English ]

MVS-8000/8000SF System
(With CCP-8000 Series Center Control Panel)
User’s Guide
Multi Format Switcher System
Volume 1 [English]
2nd Edition (Revised 3)
Software Version 9.00 and Later

NOTICE TO USERS
© 2001 Sony Corporation. All rights reserved. This
manual or the software described herein, in whole or in
part, may not be reproduced, translated or reduced to
any machine readable form without prior written approval
from Sony Corporation.
SONY CORPORATION PROVIDES NO WARRANTY
WITH REGARD TO THIS MANUAL, THE SOFTWARE
OR OTHER INFORMATION CONTAINED HEREIN AND
HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE WITH REGARD TO
THIS MANUAL, THE SOFTWARE OR SUCH OTHER
INFORMATION. IN NO EVENT SHALL SONY
CORPORATION BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTRACT, OR
OTHERWISE, ARISING OUT OF OR IN CONNECTION
WITH THIS MANUAL, THE SOFTWARE OR OTHER
INFORMATION CONTAINED HEREIN OR THE USE
THEREOF.
Sony Corporation reserves the right to make any
modification to this manual or the information contained
herein at any time without notice.
The software described herein may also be governed by
the terms of a separate user license agreement.

3
<Organization of This User’s Guide>
The User’s Guide for this system comprises Volumes 1 to 3.
Volume 1
This book. For the contents of this volume, see “Table of Contents” at the front.
Chapter 1 MVS-8000 Functions
Chapter 2 Menus and Control Panel
Chapter 3 Signal Selection and Transitions
Chapter 4 Keys
Chapter 5 Wipes
Chapter 6 DME Wipes
Chapter 7 Frame Memory
Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings
Chapter 9 Color Corrector
Chapter 10 Special Functions
Appendix (Volume 1)
• Wipe Pattern List
• DME Wipe Pattern List
• Resizer DME Wipe Pattern List
• Menu Tree
Index
Volume 2
The volume comprises the following chapters.
Chapter 11 DME Operations
Chapter 12 External Devices
Chapter 13 Keyframe Effects
Chapter 14 Snapshots
Chapter 15 Utility/Shotbox
Chapter 16 Macros
Chapter 17 Files
Appendix (Volume 2)
• SpotLighting
• Functional Differences With Models of DME
• Macro File Editing Rules
• About the Macro Attachment List Display
• Menu Operations Not Recorded in a Menu Macro
Index
Volume 3
The volume comprises the following chapters.
Chapter 18 System Setup (System)
Chapter 19 Control Panel Setup (Panel)
Chapter 20 Switcher Setup (Switcher)
Chapter 21 DME Setup (DME)
Chapter 22 DCU Setup (DCU)

4
Chapter 23 Setup Relating to Router Interface and Tally (Router/Tally)
Chapter 24 Simple Connection of the MKS-8080/8082 AUX Bus Remote
Panel
Chapter 25 DIAGNOSIS
Appendix (Volume 3)
• Data Saved by [Setup Define] and [Initial Status Define]
• Error Messages
Index

5
Functions Newly Supported in Version 9.00
The functions newly supported in the MVS-8000 system version 9.00 are as
follows.
Functions relating to operability
Functions relating to the switcher
Classification Functions supported Menu No. See page
Vol.1 Vol.2 Vol.3
Control panel Setting the sensitivity for the search
dial in jog mode
7326.10 70 211,
212
138
Inhibiting DME channel selection in
the device control block (trackball/
joystick)
7321.27 62 – 85
Transitions Setting the status display mode when
the [Auto Trans] or [Take] button is
pressed in a module
7326.4 91,
93
– 136
Keys Menu selection of key fill and key
source
1111.3 215 – –
Snapshots Saving four key snapshots in the
independent key transition control
block (simple type)
7321.25 273 – –
Multi Program 2 Inhibiting key and utility 2 bus
operations for each of main and sub
7321.18 485 – 84
Files Locking file recall operations 7317.2, 7111 to
7171
– 454 58
Utility/shotbox Displaying register names in the
Command and Action columns of the
Prefs/Utility menu
7324
7324.1
7324.2
– – 111
Classification Functions supported Menu No. See page
Vol.1 Vol.2 Vol.3
DME wipe Simultaneously setting crop values
for pairs of opposite sides or all four
sides
1116.3
1165
347 – –

6
Functions relating to setup
Frame memory Formatting an external hard disk with
15 partitions
2561 416 – –
Append mode for external hard disk
backup and restore
2562 418 – –
Managing images using a DDR/VTR 7153, 2564,
2565, 2521
420 – –
Searching by file name using the
menu Find button
2511, 2521 380 – –
Trimming a clip 2522 399 – –
PNG file support 7162 – 451 –
Macros Setting the event execution interval
for a menu macro
7144.2, 5431 – 439 –
Assigning a menu macro in the
Shortcut menu
0023.1 – 437 –
Selecting the behavior when the
same button is pressed twice during
macro execution
7326.6 – – 140
Continuously lighting a cross-point
button with a macro attachment set
7326.6 – – 140
Additional actions for a macro
timeline
5441 – 447
Multi Program 2 M/E and link operations for sub 7336.6 – – 183
Support for sub by the [TRNS] button
operable in key adjustment mode on
the Multifunction Flexi Pad
–488––
3D support Image processing in 3D mode 4216, 7313,
7322.5, 7331.10,
7331.12,
499 – –
Registers Now 250 registers for P-Bus, Macro,
and Device
6262 to 6267 – 238,
374
–
Classification Functions supported Menu No. See page
Vol.1 Vol.2 Vol.3
System Frame delay mode using the format
converter board
7332, 7313 – – 27
Classification Functions supported Menu No. See page
Vol.1 Vol.2 Vol.3

7
Functions relating to DME
Functions relating to external devices
Classification Functions supported Menu No. See page
Vol.1 Vol.2 Vol.3
Special effects Corner pinning 4142 – 133 –
Increased parameter range for split
and split slide
4141.11
4141.12
– 118,
119
–
Classification Functions supported Menu No. See page
Vol.1 Vol.2 Vol.3
Network Using the NFS server 7311 – – 15
Disk recorder
(VDCP)
Drop frame mode, and loop, recue
settings
7355.4 – – 238
Simple VDCP protocol 7355.6 – – 221
GPI Additional Keep Break and Keep
Make actions for GPI OUT
7325.3
7354
– – 127,
219
Setting the operation mode when
AUX bus override is selected as the
GPI input action
7325 – – 130

8Table of Contents
Table of Contents
Chapter 1 MVS-8000 Functions
Introduction ..................................................................................................18
Features of the MVS-8000 Multi Format Switcher System......................21
Basic Video Processing.................................................................................23
Transitions .............................................................................................23
Keys.......................................................................................................27
Wipes.....................................................................................................28
DME Wipes...........................................................................................29
Frame Memory ......................................................................................29
Color Backgrounds................................................................................29
Copy and Swap......................................................................................30
Video Process ........................................................................................30
Color Corrector......................................................................................30
Side Flags ..............................................................................................31
Multi Program 2 ....................................................................................31
Simple P/P Software..............................................................................32
Dual Link Support .................................................................................32
3D Support ............................................................................................33
Creation of Special Effects and Management of Data and Operations...34
Digital Multi Effects (DME) .................................................................34
External Devices....................................................................................35
Keyframes .............................................................................................35
Snapshots...............................................................................................36
Utility.....................................................................................................37
Shotbox..................................................................................................37
Macros ...................................................................................................37
Files .......................................................................................................38
Setup ..............................................................................................................39
Chapter 2 Menus and Control Panel
Names and Functions of Parts of the Control Panel .................................42
Control Panel: Example Configuration 1
(With Standard Transition Modules) .........................................42

9
Table of Contents
Control Panel: Example Configuration 2
(With Simple Transition Modules) ............................................44
Control Panel: Example Configuration 3
(With Compact Transition Modules) .........................................46
Cross-Point Control Block ....................................................................47
Transition Control Block (Standard Type)............................................51
Flexi Pad Control Block (Standard Type).............................................55
Key Control Block.................................................................................58
Device Control Block (Trackball).........................................................62
Device Control Block (Joystick) ...........................................................66
Device Control Block (Search Dial)......................................................67
Keyframe Control Block .......................................................................70
Numeric Keypad Control Block............................................................73
Fade to Black Control Block .................................................................76
Auxiliary Bus Control Block (for AUX Buses) ....................................77
Auxiliary Bus Control Block (for Router Control) ...............................79
Menu Control Block..............................................................................81
Memory Card/USB Adaptor Block.......................................................82
“Memory Stick”/USB Connections Block ............................................83
Utility/Shotbox Control Block ..............................................................84
Transition Control Block and Flexi Pad Control Block (Simple Type)85
Independent Key Transition Control Block (Simple Type) ..................90
Downstream Key Control Block ...........................................................92
Downstream Key/Fade-to-Black Control Block ...................................94
Transition Control Block (Compact Type) ...........................................96
CCP-6224 2M/E Control Panel.............................................................98
CCP-6324 3M/E Control Panel.............................................................99
Cross-Point Control Block (CCP-6224/6324) in the AUX Operating
Mode ........................................................................................100
Multifunction Flexi Pad Control Block...............................................102
Basic Menu Operations..............................................................................105
Menu Organization..............................................................................105
About the Top Menu List ....................................................................105
Accessing Menus.................................................................................106
Displaying a Menu ..............................................................................113
Interpreting the Menu Screen ..............................................................114
Menu Operations .................................................................................116
Operation With a Mouse .....................................................................122
Switching Between the Main Menu Site and Subsidiary Menu Site ..128

10 Table of Contents
Shortcut Menu .....................................................................................128
Chapter 3 Signal Selection and Transitions
Video Processing Flow ...............................................................................132
Signal Selection ...........................................................................................134
Basics of Signal Selection ...................................................................135
Bus Selection.......................................................................................135
AUX Panel-less Function....................................................................138
Signal Assignment and Selection ........................................................139
Signal Name Display...........................................................................142
Transitions...................................................................................................144
Selecting the Next Transition ..............................................................144
Transition Types..................................................................................144
Procedure for Basic Transition Operation...............................................147
Key Priority Setting....................................................................................150
Setting the Key Priority in the Transition Control Block....................150
Setting the Key Priority by a Menu Operation....................................152
Display of the Key Output Status and Key Priority ............................154
Selecting the Transition Type by a Menu Operation ..............................155
Super Mix Settings .....................................................................................156
Color Matte Settings...................................................................................157
Executing a Transition ...............................................................................160
Transition Indicator Function..............................................................160
Setting the Transition Rate..................................................................161
Pattern Limit........................................................................................166
Executing an Auto Transition..............................................................169
Executing a Transition With the Fader Lever (Manual Transition) ....170
Combinations of Auto and Manual Transitions ..................................171
Non-Sync State....................................................................................171
Fader Lever Operation in Bus Fixed Mode.........................................172
Transition Preview .....................................................................................174
Independent Key Transitions ....................................................................176
Basic Independent Key Transition Operations....................................179
Setting the Independent Key Transition Type by a Menu Operation..181
Setting the Independent Key Transition Rate......................................182
Fade to Black...............................................................................................186
Fade to Black Operation......................................................................186
Setting the Fade to Black Transition Rate...........................................187
Simple Transition .......................................................................................188

11
Table of Contents
Basic Operations for Simple Transitions.............................................188
Display of the Key Output Status and Key Priority ............................190
Split Fader ...........................................................................................190
Independent Key Transitions With a Simple Transition Module........191
Chapter 4 Keys
Overview......................................................................................................196
Key Types............................................................................................196
Key Modifiers......................................................................................198
Key Memory........................................................................................201
Key Default .........................................................................................202
Key Setting Operations Using Menus.......................................................203
Key Setting Menus ..............................................................................203
Key Type Setting.................................................................................204
Chroma Key Composition...................................................................206
Chroma Key Adjustments ...................................................................207
Selecting Key Fill and Key Source .....................................................213
Key Edge Modifications......................................................................218
Masks...................................................................................................225
Applying a DME Effect to a Key........................................................228
Specifying the Key Output Destination...............................................231
Key Modify Clear................................................................................232
Blink Function.....................................................................................232
Video Processing.................................................................................233
Key Setting Operations With the Key Control Block .............................234
Operations in the Key Control Block ..................................................234
Key Edge Modifications......................................................................238
Masks...................................................................................................242
Applying a DME Effect to a Key........................................................243
Other Key Setting Operations .............................................................245
Key Adjustment Operations With the Multifunction Flexi Pad Control
Block .................................................................................................248
Resizer .........................................................................................................255
Two-Dimensional Transformations of Keys.......................................255
Resizer Interpolation Settings .............................................................259
Resizer Crop/Border Settings..............................................................260
Applying Resizer Effects.....................................................................263
Key Snapshots.............................................................................................269
Key Snapshot Operations ....................................................................269

12 Table of Contents
Key Snapshot Operations Using a Simple Transition Module............272
Chapter 5 Wipes
Overview......................................................................................................276
Types of Wipe Pattern.........................................................................276
Basic Procedure for Wipe Settings ...........................................................277
Wipe Settings Menu ............................................................................277
Wipe Pattern Selection ........................................................................277
Pattern Mix ..........................................................................................279
Setting Wipe Modifiers .......................................................................284
Wipe Modify Clear..............................................................................302
Wipe Settings for Independent Key Transitions .....................................303
Basic Procedure for Independent Key Transition Wipe Settings........303
Setting Independent Key Transition Wipe Modifiers .........................304
Wipe Snapshots...........................................................................................308
Wipe Snapshot Operations With the Flexi Pad ...................................308
Wipe Snapshot Operations With the Menus .......................................311
Wipe Pattern Operations in the Multifunction Flexi Pad Control Block
...........................................................................................................314
Recalling a Wipe Snapshot..................................................................314
Selecting the Wipe Pattern ..................................................................315
Editing the Wipe Pattern .....................................................................315
Saving, Canceling, and Deleting Edited Wipe Patterns ......................318
Chapter 6 DME Wipes
Overview......................................................................................................322
Types of DME Wipe Pattern ...............................................................322
DME Wipe Pattern Variation and Modifiers.......................................330
Relation Between DME Wipes and Other Effects ..............................332
Basic Procedure for DME Wipe Settings .................................................334
DME Wipe Settings Menu ..................................................................334
DME Wipe Pattern Selection ..............................................................334
Setting DME Wipe Modifiers .............................................................337
DME Wipe Modify Clear....................................................................344
DME Wipe Settings for Independent Key Transitions ...........................345
Basic Procedure for Independent Key Transition DME Wipe Settings
..................................................................................................345
Setting Independent Key Transition DME Wipe Modifiers................346
Resizer DME Wipe Setting ........................................................................349

13
Table of Contents
DME Wipe Snapshots ................................................................................351
DME Wipe Snapshot Operations With the Flexi Pad .........................351
DME Snapshot Operations With the Menus .......................................352
Creating User Programmable DME Patterns .........................................353
User Programmable DME Transition Mode .......................................353
DME Wipe Pattern Operations in the Multifunction Flexi Pad Control
Block .................................................................................................358
Recalling a DME Wipe Snapshot........................................................358
Selecting the DME Wipe Pattern ........................................................358
Editing the DME Wipe Pattern ...........................................................359
Saving, Canceling, and Deleting DME Wipe Snapshots ....................362
Chapter 7 Frame Memory
Overview......................................................................................................364
Still Image Operations ...............................................................................368
Preparations .........................................................................................368
Interpreting the Frame Memory Menu................................................369
Selecting an Input Image.....................................................................373
Selecting Outputs and Target Frame Memory ....................................373
Capturing and Saving an Input Image.................................................374
Recalling Still Images .........................................................................378
Inverting the Field Polarity of a Saved Still Image (Field Invert Function)
..................................................................................................380
Image Processing.................................................................................381
Image Output.......................................................................................386
Continuously Capturing Still Images (Record) ...................................387
Recalling a Continuous Sequence of Still Images (Animation)..........389
Frame Memory Clip Function ..................................................................393
Frame Memory Clip Operations...............................................................395
Preparations for Operation ..................................................................395
Recalling Clips ....................................................................................395
Clip Playback ......................................................................................397
Clip Creation .......................................................................................401
Creating and Handling Frame Memory Folders..................................403
Clip Output ..........................................................................................404
Recording and Playback of Ancillary Data.........................................405
Clip Transition Operations........................................................................407
Image Data Management...........................................................................410
Pair File Processing .............................................................................410

14 Table of Contents
Moving Files........................................................................................411
Deleting Files ......................................................................................412
Renaming Files....................................................................................413
File Backups ........................................................................................414
Restoring Files.....................................................................................414
External Hard Disk Drive Access .............................................................415
Hard Disk Formatting..........................................................................416
Saving Files .........................................................................................417
Recalling Files.....................................................................................418
Managing Images Using a DDR/VTR.......................................................420
Using a DDR/VTR for High-speed Backup and Restoring.................420
Extracting Images from Video Tape ...................................................422
Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings
Color Background ......................................................................................426
Color Background Settings Menu .......................................................426
Basic Color Background Setting Operations.......................................426
Copy and Swap ...........................................................................................430
Copy and Swap Operations .......................................................................434
Copy and Swap Menu Operations.......................................................434
Copy by Button Operation ..................................................................435
Misc Menu Operations...............................................................................437
Port Settings for Control From an External Device ............................437
Editing Keyboard Settings...................................................................438
Safe Title Settings ...............................................................................439
Displaying a List of Transition Rates and Changing the Settings.......440
AUX Menu Operations ..............................................................................442
AUX Bus Settings ...............................................................................442
Status Menu ................................................................................................443
Router Control Menu Operations.............................................................444
Checking the List of Inputs for Each Destination ...............................444
Switching the Source for Each Destination.........................................445
Video Process ..............................................................................................446
Video Process Adjustments of a Primary Input Signal .......................446
Video Process Adjustments on a Particular Bus .................................446
Video Process Memory .......................................................................447
Video Process Settings................................................................................448

15
Table of Contents
Chapter 9 Color Corrector
Preparations................................................................................................450
Overall Color Corrector Operations ........................................................453
Enabling Color Corrector ....................................................................453
Copy and Swap Operations .................................................................453
Color Corrector Functions ........................................................................455
Input Video Processing Operations.....................................................455
Primary Color Correction Operations .................................................456
Secondary Color Correction Operations .............................................460
RGB Clip Operations ..........................................................................461
Luminance Processing Operations ......................................................461
Spot Color Adjustment........................................................................464
Output Video Processing Operations ..................................................467
YUV Clip Operations..........................................................................468
Chapter 10 Special Functions
Side Flags.....................................................................................................472
Overview .............................................................................................472
Side Flag Settings................................................................................472
Wipe Action on Images With Side Flags ............................................474
DME Wipe Action for an Image With Side Flags ..............................475
Multi Program 2 .........................................................................................477
Overview .............................................................................................477
Sequence of Operations in Multi Program 2 .......................................478
Basic Operations (Required) ...............................................................479
Examples of Operations in the Multi Program 2 Mode (When Sharing a
Switcher Bank).........................................................................483
Optional Operations ............................................................................484
Functions Added in Multi Program 2 Mode .......................................488
Differences Between Multi Program 2 Mode and Standard Mode .....489
Restrictions on Using Multi Program 2 Mode ....................................490
Simple P/P Software ...................................................................................492
Overview .............................................................................................492
Restrictions on Use..............................................................................492
Dual Link Support......................................................................................496
3D Support ..................................................................................................499
Overview .............................................................................................499
Preparations .........................................................................................500
Restrictions in 3D Mode......................................................................506

16 Table of Contents
Video Creation in 3D Mode ................................................................506
Appendix (Volume 1)
Wipe Pattern List .......................................................................................510
Standard Wipes....................................................................................510
Enhanced Wipes ..................................................................................511
Rotary Wipes.......................................................................................512
Mosaic Wipes ......................................................................................513
Random/Diamond Dust Wipes............................................................515
DME Wipe Pattern List .............................................................................516
DME Wipe Patterns Available in One-Channel Mode .......................516
DME Wipe Patterns Available in Two-Channel Mode.......................524
DME Wipe Patterns Available in Three-Channel Mode.....................529
Resizer DME Wipe Pattern List ...............................................................530
Menu Tree ...................................................................................................532
Recalling Menus..................................................................................532
M/E-1 to M/E-3 Menus .......................................................................532
PGM/PST Menu ..................................................................................535
Frame Memory Menu..........................................................................537
Color Bkgd Menu................................................................................538
AUX Menu ..........................................................................................538
CCR Menu...........................................................................................539
Copy/Swap Menu ................................................................................540
Misc Menu...........................................................................................540
Status Menu.........................................................................................541
DME Menu..........................................................................................542
Global Effect Menu .............................................................................543
Device Menu .......................................................................................543
Macro Menu ........................................................................................544
Key Frame Menu.................................................................................545
Effect Menu.........................................................................................546
Snapshot Menu ....................................................................................547
Shotbox Menu .....................................................................................548
File Menu ............................................................................................549
Engineering Setup Menu .....................................................................550
Diagnostic Menu .................................................................................554
Index ............................................................................................................555

17
Chapter 1 MVS-8000 Functions

Chapter 1 MVS-8000 Functions
18 Introduction
Introduction
This manual is the User’s Guide for the MVS-8000/8000SF Multi Format
Switcher system. The MVS-8000 and MVS-8000SF have different numbers of
M/E banks and input/output signals, but are otherwise functionally identical.
This manual refers to these generically as the “MVS-8000 system,” and
describes principally the operation of the system using the CCP-8000 of center
control panels.
The User's Guide for this system comprises three volumes.
For the contents of each volume, see the section “Organization of This User’s
Guide” at the front of this volume.
Devices and system nomenclature
In this manual, when discussing the principal components of the MVS-8000
system, in place of the formal product names, abbreviated names
characterizing the functions and features are sometimes used. When
distinctions between system configurations must be drawn, the terms in the
following table are used.
Principal components and naming
The formal product names of the principal components of the MVS-8000
system, and the terms used in this manual are as follows.
a) Where there are differences among the MVS-8000/8000SF system, MVS-8000A/8000ASF
system, and MVS-8000G/8000GSF system, these may be noted specifically in the relevant
place.
System nomenclature
The following terms are used for systems, depending on the combination of
installed options, and the signal format.
Formal product name Term used in this manual
MVS-8000/8000SF/8000A/8000ASF/8000G/
8000GSF Multi Format Switcher Processor a)
Switcher or switcher processor
MVE-8000 (MKS-8800)/8000A Multi Format
DME Processor
DME or DME processor or MVE-8000/
8000A
MVE-9000 Multi Format DME Processor DME or DME processor or MVE-9000
CCP-8000, CCP-6224, CCP-6324 Center
Control Panel
Control panel or center control panel
DCU-8000 (MKS-8700) Device Control Unit DCU or MKS-8700
DCU-2000 (MKS-2700) Device Control Unit DCU or MKS-2700

Chapter 1 MVS-8000 Functions
19
Introduction
Related manuals
The following manuals are supplied with the individual products of the MVS-
8000 Multi Format Switcher system.
MVS-8400/8300/8200 Switcher Processor Pack
• MVS-8400/8300/8200 Operation Manual
• MVS-8400/8300/8200 Installation Manual
MVS-8000A-C/8000AS-C Switcher Processor Pack
• MVS-8000A-C/8000AS-C Operation Manual
• MVS-8000A-C/8000AS-C Installation Manual
MVS-8000G-C/8000GS-C Switcher Processor Pack
• MVS-8000G-C/8000GS-C Operation Manual
• MVS-8000G-C/8000GS-C Installation Manual
MVS-8000SF-C Switcher Processor Pack
• MVS-8000SF-C Operation Manual
• MVS-8000SF-C Installation Manual
MVE-8000-C DME Processor Pack
• MVE-8000-C Operation Manual
• MVE-8000-C Installation Manual
MVE-8000A DME Processor Pack
• MVE-8000A Operation Manual
• MVE-8000A Installation Manual
MVE-9000-C DME Processor Pack
• MVE-9000-C Operation Manual
• MVE-9000-C Installation Manual
System configuration and features Term for system
System with installed option boards and
settings to support HDTV format
HD system
System with installed option boards and
settings to support SDTV format
SD system
A system in which the center control panel
has four M/E banks
4M/E system
A system in which the center control panel
has three M/E banks
3M/E system
A system in which the center control panel
has two M/E banks
2M/E system