Sorelle Chandler Hutch User manual

Chandler Hutch/Bookcase
Website: www.sorellefurniture.com
Important Information:
Before assembly, read these instructions. Make sure
Made in ASY Vietnam
all preassembled parts are tight. Store this instruction
manual for future reference.

(G) Adjustable Shelf (1 pc)
(H) Upper Back Rail (1 pc)
( I ) Middle Back Rail (1 pc)
Front top rail (1 pc)
A
B
C
E
D
Top panel ( 1 pc)
Left Side panel (1 pcs)
Assembly Hardware
Right Side panel (1 pcs)
Bottom panel/Bookcase Base(1pc)
Back panel (2 pcs)K
Fixed Shelf (1 pc)(F)
J) Back Bottom Rail (1pc)
Hutch Assembly Parts
Page 2
Shelf Support (4 pcs)
M6*32MM Allen Bolt (16 pcs)
( b )
( a )
( c )
Ø3.5 X 15mm Phillips Screw (4 pcs)
(d)
Allen Key (1PC)
(e). Flat Washer ( 2 pcs)
(f )M6*35mm Cam Bolt (9 pcs)
(g) Ø14*13 Cam Lock (9 pcs)
(h) Wall Strap Kit (1 Sets)
A
B
C
D
K
H
J
E
F
G
I

Hutch Assembly
Insert Six (6) Cam Bolt(h) to Side panel(B&C).
Attach the Fixed shelf (F) to the right side panel( C ) using 32mm bolts(2pcs) , Use Allen key to tighten bolts.
Attach the Front top Rail (E) to the right side panel( C ) using 32mm bolts(1pc)+Washer(1pc) ,
Use Allen key to tighten bolts.
Attach the Upper Back Rail (A) and Middle Back Rail (I) and Back- Bottom Rail(J) to the right side panel (C)
by four Cam lock(g) .See Figure 1.
Slide the back panel (K) into the grooves as diagram.
1
2
Figure 1.
Figure 2.
Page 3
B
C
f x 6
C
c
d
FX 4
C
H
I
J
J
C
g x 3
E
F
K
K
J
H
E
F

Hutch Assembly
3
4
Figure 3.
Figure 4.
Page 4
Tool required
C
B
K
I
J
g x 3
c
e
E
C
X 2
B
F
B
C
AA
E
c x 6
Attach the Left side panel to the Upper Back Rail (A) and Middle Back Rail (I) and Back- Bottom Rail(J)
by four Cam lock(g) .See Figure 2.
Attach the Left side panel to the Fixed shelf (F), using 32mm bolts(2pcs) , Use Allen key to tighten bolts.
Attach the Left side panel to the Front top rail (E) , using 32mm bolts(1pc)+Washer(1pc), Use Allen key to tighten bolts.
Attach the Top panel (A) to left side panel (B) and right side panel (C) , using 32mm bolts(6pcs)
Use Allen key to tighten bolts. See Figure 4.

g x 3
Hutch/Bookcase Base Assembly
5
6
Figure 5.
Figure 6.
Page 5
A
C
B
Dc x 4
D
J
Attach the Bottom panel/Bookcase base (D) to left side panel (D) and right side panel (C) ,
using 32mm bolts(4pcs) ,
Use Allen key to tighten bolts. See Figure 5.
Attach the Bottom panel/Bookcase base (D) to Back Bottom Rail (J)
,
by four Cam lock(g) .See Figure 6.

Hutch Assembly
Page 6
7See Figure 7.
See Figure 7.
G
b (4x)
a (4x)
C
B
G
Attach Adjustable Shelf (G) by using Four (4)Shelf Support(a) and Four(4) Phillips Screw(b)