Southern Enterprises CK622400TX User manual

CK622400TX- Espresso
CK612400TX- Black
Nailhead Cocktail Table Trunk
Assembly Instructions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
PO#12972
Max Top Load 80 lbs.
Max Load Inside the Trunk 100 lbs.

CK622400TX- Espresso/ CK612400TX- Black
Nailhead Cocktail Table Trunk
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if
hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your
hardware according to the pictures. Using the incorrect hardware will cause damage.
A 1 PC
Top
B 1 PC
Front Panel
C 1 PC
Back Panel
D 1 PC
Left Side Panel
E 1 PC
Bottom Panel
F 4 PCS
Leg
G 1 PC
Right Side Panel

H 8 PCS
Cam Bolt
ϕ6.8 x 36mm
I 8 PCS
Cam Lock
ϕ15 x 12mm
J 1 PC
Wrench
K 8 PCS
Dowel ϕ8 x 30mm
L 8 PCS
Bolt ϕ¼” x 2 ¾”
M 35 PCS
Screw ϕ3.5 x 16mm
N 1 PC
Left-Support
O 1 PC
Handle-A
P 1 PC
Handle-B
Q 2 PCS
Handle
R 1 PC
Right Support
S 10 PCS
Sponge Cushion
T 2 PCS
Hinge
Care and Cleaning Instructions:
Before using, wipe with a clean dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Assembly Tool Required
No.2 Phillips Screwdriver

CK622400TX- Espresso/ CK612400TX- Black
Nailhead Cocktail Table Trunk
Assembly Instructions
Please do not over-tighten cam bolts,
please stop when you feel them tighten.
Attach handle (O) to the top (A) using screws
(M) and tighten with Phillips screwdriver as
shown.
Attach handle (P) to front panel (B) using
screws (M) and tighten with Phillips
screwdriver as shown.
Screw small cam bolts (H) into front panel (B)
as shown.

Attach handle (Q) to left side panel (D) and
right side panel (G) using screws (M) and
tighten with Phillips screwdriver as shown.
Screw small cam bolts (H) into back panel
(C) as shown.
Insert dowels (K) into left side panel (D) and
right side panel (G) as shown.
Assemble left side panel (D), right side panel
(G), front panel (B), back panel (C) and
bottom panel (E) together by inserting cam
bolts (H) and dowels (K) into corresponding
holes and joining panels together.
Insert cam locks(I) into corresponding holes
and turn clockwise to tighten and secure
panels.
Make sure the edges of bottom panel (E) are
inserted into the grooves of panels.
Cover the cam locks with sponge cushions
(S).

Turn the trunk base upside down and attach
legs (F) to the bottom of trunk using screws
(L) as shown.
Attach hinge (T) to back panel (C) and top
panel (A) by using screws (M) as
shown and
tighten all screw with Phillips screwdriver.
Attach left support (N) and right support (R)
to the top (A) and trunk base using screws
(M) and tighten with Phillips screwdriver as
shown.
Place sponge cushions (S) on corners of
front panel (B) as shown.
The top should close slowly.
M

Parts Replacement Form
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at servi[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell
, Texas
75019