Southern Enterprises WS592600TX User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800- 33-509
[e-mail]
www.seidal.com
WS592600TX
Florian Mirror- Navy
Assembly Instructions
PO#:

Florian Mirror- Navy
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
1
Quantity
of 1
Florian Mirror
A.
Quantity
of 4
Plastic Anchor
B
.
Quantity
of 4
Screw Dia7mmx1-1/2”L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Tool List: 3/16" Drill Bit, Drill, Tape Measure and Pencil.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)
Page 2

Note: No drilled hole or plastic anchor required when mounting to
wood wall use screw only. We do not supply hardware for
mounting on concrete walls.
Figure 1
Find a desired location and mark 2
locations for screws on wall.
One screw (for each unit) must be
attached directly into a wall stud.
Wall anchor is not needed when
mounting to wall stud.
Drill one of the markings with a
3/16" drill bit.
Insert Plastic Anchor (A) into the
hole on wall as shown. (When
doing this, you will need a hammer
help you).
Using the Phillips head
screwdriver, install Screw (B) into
the Anchor (A) and into the
remaining marked hole.
Turn the Screws (B) until there is a
gap of approximately 3mm
between the head of the screw and
the wall.
Figure 2
Hang the Mirror onto the Screws
(B) and verify the Mirror is resting
securely on the mounting screw.
Now your Florian mirror is ready to
use.
Page3
Florian Mirror- Navy
Assembly Instructions
"The hole measurement on
wall must match with the
hole measurement on back
of the unit"

If you prefer to hang this product in horizontal configuration, please follow below instructions.
Note: No drilled hole or plastic anchor required when mounting to
wood wall use screw only. We do not supply hardware for
mounting on concrete walls.
Figure 3
Find a desired location and mark 2
locations for screws on wall.
One screw (for each unit) must be
attached directly into a wall stud.
Wall anchor is not needed when
mounting to wall stud.
Drill one of the markings with a
3/16" drill bit.
Insert Plastic Anchor (A) into the
hole on wall as shown. (When
doing this, you will need a hammer
help you).
Using the Phillips head
screwdriver, install Screw (B) into
the Anchor (A) and into the
remaining marked hole.
Turn the Screws (B) until there is a
gap of approximately 3mm
between the head of the screw and
the wall.
Figure 4
Hang the Mirror onto the Screws
(B) and verify the Mirror is resting
securely on the mounting screw.
Now your Florian mirror is ready to
use.
Page 4
"The hole measurement on
wall must match with the
hole measurement on back
of the unit"

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 5