Southern Enterprises BC272300TX User manual

Page | 1
PO#:
BC272300TX
Lowry Storage Bench
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.seidal.com

Page | 2
1) Quantity
of 1
Top Panel
2) Quantity
of 1
Left Side Panel
3) Quantity
of 1
Right Side Panel
4) Quantity
of 1
Shelf Panel
5) Quantity
of 1
Bottom Panel
6)Quantity
of 2
Middle Panel
7) Quantity
of 3
Small Middle Panel
8) Quantity
of 1
Back Panel
9) Quantity
of 1
Cushion
10) Quantity
of 3
Metal Frames
11) Quantity
of 3
Bottom Basket
12) Quantity
of 1
Center Support Leg
Lowry Storage Bench
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if
hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your
hardware according to the pictures. Using the incorrect hardware will cause damage.

Page | 3
A) Quantity
of 12
Cam Bolts
B) Quantity
of 12
Cam Locks
C) Quantity
of 20
Wood Dowels Dia. 5/16"x1-1/4"
D)Quantity
o f 8
Bolt Dia. 1/4x1-1/4” L
E)Quantity
o f 8
Spring Washer Dia.1/4”
F)Quantity
o f 8
Flat washer Dia.1/4” x3/4”
G) Quantity
of 1
Allen Wrench
H ) Quantity
of 28
Screw Dia. 1/8” x 1/2”L
I) Quantity
of 1
Left-Support
J) Quantity
of 1
Right -Support
K) Quantity
of 12
Wood Dowels Dia. 1/4"x1-1/4"
L) Quantity
of 2
Hinges
M) Quantity
of 14
Screws Dia. 1/8”x1/2”L
N) Quantity
of 12
Cotton Mat
O) Quantity
of 2
Adhesive Pad
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the
finish. Avoid rubbing or scratching the surface
with rough or abrasive objects.
For replacement parts or questions, please call
Customer Service at 1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver
(Not Included)

Page | 4
Figure 1
Attach the Shelf Panel (4) to the Middle
Panel (6) as figure shown.
Figure 2
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into corresponding
holes on Middle Panel (6).
Screw Cam Bolts (A) into threaded holes
on Bottom panel (5).
Attach Bottom Panel (5) to Middle Panel
(6) by inserting Cam Bolts (A) and Wood
Dowel (C) into corresponding holes until all
panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Cover Cam Locks (B) with Cotton Mat (N)
provided.
Attach the Center Support Leg (12) to the
Bottom Panel (5) with hand.
Lowry Storage Bench
Assembly Instructions
5
N

Page | 5
Figure 3
Attach the Left/ Right Side Panel (2/3) to
Shelf Panel (4) and Bottom Panel (5) with
Bolts (D), Spring Washers (E) and Flat
Washers (F) and Wood Dowels (C).
Tighten bolt with Allen Wrench (G).
Figure 4
Attach Small Middle Panel (7) to Shelf
Panel (4) by using Wood Dowels (K) as
shown.
DEF
2
7
7
7
K

Page | 6
Figure 5
Insert Cam Locks (B) into corresponding
holes on Left/ Right Side Panel (2/3) &
Middle Panel (6).
Screw Cam Bolts (A) into threaded holes
on Top panel (1).
Attach Top Panel (1) to Left/ Right Side
Panel (2/3) & Middle Panel (6) by inserting
Cam Bolts (A) and Wood Dowel (C/K) into
corresponding holes until all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Cover Cam Locks (B) with Cotton Mat (N)
provided.
Figure 6
Attach Back Panels (8) to back of the unit
with Screws (H).
Tighten Screws (H) with Phillips
screwdriver .
1
N
K
8H

Page | 7
Figure 7
Attach Hinges (L) to Top Panel (1) and
Cushion (9) using Screws (M).
Open Cushion (9), attach Arm Hinges (I/J)
to Top Panel (1) and trunk base using
Screws (H).
Tighten Screws with Phillips screwdriver.
Place Adhesive Pads (O) on top corners of
Top Panel (1) as shown.
Close Cushion (9) and let it drop down
slowly.
Figure 8
Attach the wicker bottom (11) to wicker
frame (10).
M
L
I
9O
H
J
10
11

Page | 8
Figure 9
Insert wicker baskets.
Figure 10
Now your Lowry Storage Bench is ready to
us!

Page | 9
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas),
Mon-Fri 9am – 4pm CST, or email us at [e-mail]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues
with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Parts Replacement Form
Customer Service: 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019