Southern Enterprises FRANCISCO HO9252R0TX User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800- 33-509
[email protected]
wwww.seidal.com
ITEM NO HO9252R0TX
“FRANCISCO” MISSION DESK
Assembly Instructions
PO#13190

A Quantity
of 1
Desk Top
B Quantity
of 2
Drawer Guide
C Quantity
of 1
Back Frame
D Quantity
of 1
Drawer Frame
E Quantity
of 2
Side Panel
F Quantity
of 1
Keyboard Drawer
G Quantity
of 1
Keyboard Drawer Front
H Quantity
of 1
Hutch Bottom Panel
I Quantity
of 1
Hutch Left Side Panel
J Quantity
of 1
Hutch Right Side Panel
K Quantity
of 2
Hutch Left Side Divider
L Quantity
of 2
Hutch Right Side Divider
M Quantity
of 1
Hutch Back Panel
N Quantity
of 1
Hutch Top Panel
O Quantity
of 2
Hutch Drawer Front
P Quantity
of 4
Hutch Drawer Side Panel
Q Quantity
of 2
Hutch Drawer Back Panel
R Quantity
of 2
Hutch Drawer Bottom Panel
Care and Cleaning Instructi ns:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800- 33-509
please call Manufacturer for assistance, questions
or Parts.
Assembly T l Required
N .2 Phillips Screwdriver (N t Included)
“FRANCISCO” MISSION DESK
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Using a screw that is too long
will cause damage. Before beginning assembly, separate each type of
screw. Carefully study the screw diagrams below.
You may receive extra
h
ardware with your
unit.

1 Quantity
of 18
Bolt (Ø1/4”*1”)
2 Quantity
of 2
Bolt (Ø1/4”*1-1/8”)
3 Quantity
of
Bolt (Ø5/32”*1/2”)
4 Quantity
of 8
Wood Dowel (Ø8*30MM)
5 Quantity
of 24
Wood Dowel (Ø *30MM)
6 Quantity
of 4
Wood Screw (8#*1-1/4”)
7 Quantity
of 4
Wood Screw (Ø3*14MM)
8 Quantity
of 18
Wood Screw (Ø3*12MM)
9 Quantity
of 2
Hinge
10 Quantity
of 2
Plastic Drawer Stopper
11 Quantity
of 2
Plastic Drawer Stopper
12 Quantity
of 1
Wood Screw (Ø3*3/4”)
13 Quantity
of 3
Handle
14 Quantity
of 8
Cam Bolt
15 Quantity
of 8
Cam Lock
16 Quantity
of 4
Adhesive Pad
17 Quantity
of 1
Wrench
18 Quantity
Of 18
Washer
19 Quantity
Of 18
Lock Washer 1/4”
Care and Cleaning Instructi ns:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800- 33-509
please call Manufacturer for assistance, questions
or Parts.
Assembly T l Required
N .2 Phillips Screwdriver (N t Included)
“
FRANCISCO
”
MISSION DESK
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Using a screw that is too long
will cause damage.Before beginning assembly,separate each type of
screw. Carefully study the screw diagrams below.
You may receive extra hardware with your unit.

Figure 1
Assembly Instructions:
Wood may scratch easily, Be
careful when assembling. Do not
scratch.
Step 1 Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check
that you have all parts
indicated on the front
page.
Step 2 Set the desktop upside
down on smooth padded
surface.
Step 3 Attach the Drawer Guides
(B) to the Desk Top (A)
with 4pcs Wood Dowels (4)
and 4pcs Wood Screws ( ).
Figure 2
Connect the Back Frame (C),
Drawer Frame (D) and Desk Top
(A) with pcs Bolt (1) and 6pcs
Washers(18).
Figure 3
Attach the Side Frame (E) to the
unit assembled at STEP2 with
4pcs Bolt (1) and 4pcs Washers(18)
4pcs Wood Dowel (4).
“ FRANCISCO ” MISSION DESK
Assembly Instructions
B
A
B
6
66
6
44
44
CD
A
111
1
11
18
18
18
18 18 18
E
E
A
1
1
11
4
4
4
4
18
18
18
18

1
11
1
1
11
1
18
18
18
18
19
19
Figure 4
Connect the Side Frame (E),Back
Frame (C) and Drawer Frame (D)
with 8pcs Bolts (1) and 8pcs
Washers(18).
Figure 5
Assemble the drawer (F/G) by
using 2pcs Hinge (9). Tighten the
hinge with 12pcs Screws (8).
Figure 6
Attach the Plastic Drawer Stopper
(10) to the Keyboard Drawer (F
)
with pcs Wood Screws (8).
Fix the Handle (13) to the
Keyboard Drawer Front (G) with
2pcs Bolt (3) as figure shown.
“
FRANCISCO
”
MISSION DESK
Assembly Instructions
FG
88
9
9
8810
10 33
13

Figure 7
Put the Keyboard Drawer to the
right position.
Figure 8
Attach 2pcs Plastic Drawer Stoppers
(11) to the Keyboard Drawer (F)
with 4pcs Wood Screws (7) as shown.
Figure 9
Connect the Left and Right Side
Panel (I,J),the Bottom Panel (H)
with 4pcs Wood Dowels(5),2pcs
Cam Bolts(14) and 2pcs Cam
Lock(15).
“ FRANCISCO ” MISSION DESK
Assembly Instructions
11
7
7
11
7
H
I
J
5
5
5
5
15
14
14
15

K
K
L
L
55
55
55
55
15
15
14 14
Figure 10
Connect the hutch divider (L,K)
with 8pcs Wood Dowels (5) 2pcs
Cam Bolts (14),2pcs Cam Locks
(15).
Figure 11
Put the Hutch Back Panel (M) to
the right position.
Figure 12
Connect the Hutch Top Panel with
12pcs Wood Panels (5),4pcs Cam
Bolts (14) and 4pcs Cam
Locks(15)
“ FRANCISCO ” MISSION DESK
Assembly Instructions
M
N
55
55
5555
55
55
15
15
15 15
14
14 14
14

2
2
16
Figure 13
Attach the unit assembled at
STEP12 to the Desk Top (A) with
2pcs Bolt (2).
Then put adhesive pad (1
) on
Bottom Panel (H)
Figure 14
Fix the Handle (13) to the Hutch
Drawer Front (O) with 2pcs Bolt
(3) as figure shown.
Connect the Hutch Drawer Sides
(P) ,Drawer backs (Q), Drawer
bottoms (R) and Front Drawer
Panel(O) with 8pcs Wood Screws
(12) as figure shown
Figure 15
Put 2 Drawers to the right
position.
“ FRANCISCO ” MISSION DESK
Assembly Instructions
O
P
P
Q
R
12
12
12
12
12 12
12
12
13
33
O

Parts Replacement Form
Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at servi[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019