Speakman S-3470 User manual

INSTRUCTIONS FOR MODELS
92-S-3470-R1
For additional assistance or service please contact:
SPEAKMAN®Company
400 Anchor Mill Road
New Castle, DE 19720
800-537-2107
[e-mail]
www.speakmancompany.com
S-3470
TOOLS AND SUPPLIES
IMPORTANT
SAFETY TIPS
Be sure to wear eye protection.
MAINTENANCE
Your new Faucet Drain is designed for years of
trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. Avoid
abrasive cleaners, steel wool, and harsh chemicals
as these will dull the finish and void your warranty.
WARRANTY
1 Year Limited Warranty
Additional warranty information can be found at:
www.speakmancompany.com
Plumber’s
Putty
Slip Joint
Wrench
1Remove Mounting Nut (1), Metal Washer
(2), and Sealing Washer (3) from Drain
Assembly.
2Apply included Upper Drain Seal (1) or
Plumber’s Putty to the underside of the
Upper Flange. Insert Drain Assembly into
drain hole of sink from above.
3From below, install Sealing Washer (3),
Metal Washer (2), and secure with
Mounting Nut (1). Tighten with Slip Joint
Pliers. Take care to not over-tighten
connection.
4Test Drain operation by pressing down on
Stopper to open/close Drain.

S-3470 ROUGH-IN DIAGRAM SPEAKMAN®
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
NOTES:
COMPLIANCE:
FEATURES:
CONNECTIONS:
ASME A112.18.1/CSA B 125.1
• Brass Construction
• Rubber Seals
For 1-¼” Drain Connections
63
4
"
171mm
11
4
"
32mm
21
8
"
54mm
2"
[ 51mm ]
PUSH ON / POP OFF
ACTIVATION
(FOR DRAIN CONNECTION)
MAX