SportsArt Fitness S931 User manual

Sports Art Industrial Co., Ltd. TUV-CERT ISO 9001/9002/14000 Certied Quality Products 2013.08.12
S931 Abdominal Crunch
Owner’s Manual

S931 OWNER’S MANUAL CONTENTS
1. INTRODUCTION ................................................................................ 2
2. SAFETY PRECAUTIONS .................................................................. 3
3. LIST OF PARTS ................................................................................. 4
4. ASSEMBLE THE PRODUCT ............................................................. 6
STEP 1 Install the Weight Stack Covers ................................................ 6
STEP 2 Install the Storage Tray Holder ................................................. 7
STEP 3 Belt Tension Adjustment Instructions ........................................ 8
STEP 4 Minor Weight Stack Instructions ............................................... 9
5. MAINTENANCE ................................................................................ 10
MAINTENANCE Machine Maintenance ................................................ 10
MAINTENANCE Schedule .................................................................... 12
MAINTENANCE Task List .................................................................... 13
MAINTENANCE One-Year Maintenance Log ....................................... 14
6. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 15

2
1. INTRODUCTION
Congratulations on the purchase of a high quality SportsArt product, the S931
Abdominal Crunch machine. Constructed of high quality materials and designed for
years of reliable performance, this product was made for full commercial use.
Before this product is assembled or operated, we recommend that you familiarize
yourself with this manual. Understanding the correct assembly and operation of
this product will help ensure that exercisers obtain their tness goals safely and
successfully.

3
2. SAFETY PRECAUTIONS
This product was designed and built for optimum safety. However certain
precautions apply during the use of this product. Please note the following safety
precautions:
• Please read the entire manual before assembly and operation. Make
sure the product is installed and operated as instructed in this manual.
• Assemble and operate the product on a solid, level surface. Do not use
outdoors or near water, including pools and saunas.
• Check the product before every use. Make sure all parts are assembled,
and all fasteners are tightened. Do not use the product if it is disassembled
in any way.
• Wear proper workout clothing. Do not wear loose clothing. Do not wear
shoes with leather soles or high heels. Tie all long hair back. Do not go
barefoot on this product.
• Keep away from moving parts. Moving parts may or may not stop
immediately if an object becomes caught or impedes normal motion.
• Use this product only for its intended purpose as described in this manual.
• Be careful when mounting and dismounting the unit.
• Never operate this product if it has been damaged in any way. If it is
not working properly, or has been dropped or damaged, contact a service
technician for repairs.
• Do not use accessories that are not specically recommended by the
manufacturer. Such parts might cause injuries or cause the unit to fail.
• This product is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or by people who are
otherwise decient in product knowledge or experience. If such people use
this product, they should be given training and be supervised at all times by
someone responsible for their safety.
• Children should be supervised to ensure that they do not play on or near
the product.
• The user weight limit for this product is 227 kg, 500 lb.
CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR
WORKOUT and consult your physician immediately. Work within your
recommended exercise level. DO NOT work to exhaustion. Before beginning
any exercise program, you should consult with your doctor. It is recommended that
you undergo a complete physical examination.
*NOTE: Regarding the decaled resistance on the unit weight stack, the
actual weight being lifted is configured at a ratio of 3.3:1. Example: If the
stack fork is engaged at 60KG (132LB) at the weight stack, the actual pulling
weight is 20KG (44LB).

4
3. LIST OF PARTS
Assembly Parts
No. Name Qty. No. Name Qty.
A1 Main frame 1 A4 118 Oval Foot Cover A 3
A2 Weight Stack Front Cover 1 A5 118 Oval Foot Cover B 3
A3 Weight Stack Back Cover 1 A6 Storage Tray 1

5
Components on the Product
No. Name Specication Notes
20 Plastic round head hex screws M6*P1.0*L20
Components in the Hardware Kit
No. Name Qty. Specication Notes
10 Push revits 6
L-shaped Allen wrench 1 M5
Double open-end wrench 1 8*17

6
4. ASSEMBLE THE PRODUCT
Follow instructions below to assemble this product. Note that in this manual
the words “left” and “right” are used to refer to the product and its parts. As
such, these designations correspond to the “left” and “right” sides of a person
in position to exercise on this product. Also, for brevity, the word “screws” or
“nuts” is used where washers and other hardware may be involved.
STEP 1 Install the Weight Stack Covers
(a). Attach both front and back weight stack covers (A2)(A3) onto the main
frame (A1). (Note: before the attaching the front weight stack cover (A2),
make sure the inside hanger is hooked to the frame before securing it to the
main frame.)
(b). Attach the oval foot covers (A4)(A5) onto the main frame (A1) legs. Align
the ends before use push revits (10) to secure the foot covers together.
Note: While installing the oval foot covers, if the holes don’t match up, please
change the direction of the covers. The cutout should face the inner side of
foot tube.

7
STEP 2 Install the Storage Tray Holder
Please follow the instructions (a) through (b) to install the storage tray
(a). Locate the position where the storage tray (A6) attaches to the main
frame (A1), then remove the screws (20) from the main frame.
(b). Attach the storage tray (A6) to the main frame (A1) and use screws (20)
to secure the assembly.

8
STEP 3 Belt Tension Adjustment Instructions
1. After the installation and the final positioning of the machine, make the ap-
propriate adjustments to ensure that the machine is working.
2. If the belt is too tight or too loose, first loosen nut A as shown then adjust
nut B. If the belt length is too long, adjust downward; if the belt length is too
short, adjust upward. Adjust the belt to the proper position, then tighten nut
A to secure the belt length.
Note: After adjusting the belt, the gap between nut Aand B must be within
35mm(1.4”). If the gap still exceeds the 35mm limit after the first step, you
need to:
A. Loosen the screws on C and adjust the belt to the proper length.
B. Tighten the scrwes on C.
3. After the adjustment, then the machine should be tested to determine the
functionality of the machine.

9
STEP 4 Minor Weight Stack Instructions
To adjust the minor weight stack, insert the upper pin to add 3.5Lbs/1.5kgs
or the lower pin to add 6.5Lbs/3kgs. When the minor weights are not in use,
pull the pin to release the weight.