SPORTSTECH sWalk User manual

1
sWalk
•WALKING PAD
SportstechBrandsUSACorporation
444 Brickell Ave Ste 700 Miami,
FL 33131-2455
SERVICE: https://www.sportstech.care
[e-mail]

3
User Manual
WARNING! Danger from improper use!
• Make sure that ALL persons using the device have read and understood this user
manual. Keep this manual in a safe place close to the device.
• Adhere to ALL Safety Advices in this manual.
• NEVER overexert yourself or others when using the device.
Dear customer,
We are pleased you chose a device from the SPORTSTECH product range. SPORTSTECH sports
equipment offers you high quality and new technology.
In order to fully use the potential of your device and be able to enjoy it for many years, please read
this manual carefully before starting up and beginning of training, and use the device according to the
instructions. The operational safety and function of the device can only be guaranteed if the safety
instructions in this user manual are observed.
We shall not assume any liability for damages resulting from improper use or incorrect operation.
Table of contents
Scope of delivery .....................................................................................................................................................3
Technical data...........................................................................................................................................................3
Exploded drawing/spare parts list.....................................................................................................................3
1. Important Safety Notes...................................................................................................................................... 5
2. Setting up, Storing ..............................................................................................................................................9
3. Control ....................................................................................................................................................................9
4. Training................................................................................................................................................................. 10
5. Bluetooth audio function ............................................................................................................................... 13
6. Troubleshooting ................................................................................................................................................ 13
7. Cleaning and maintenance ............................................................................................................................ 14
This manual represents a status at press date.
It is subject to changes without notice and to errors and omissions.
Please see https://sportstech.link/us/swalk/ for the latest version of the manual.
Scope of delivery
1Motor-driven treadmill with variable speed; with display and loudspeakers
2Remote control 3Power cable
4Pads for storing 5Operating manual
6Duo-tool (Hex and cross-head wrench) for pads and for tensioning
Technical data
Product dimensions (LxWxH) when set up 4.17 × 1.85 × 0.37 ft (127 × 56.5 × 11.5 cm)
Net weight of the device 51.8 lbs (23,5 kg)
Maximum permitted user weight 286 lbs (130 kg)
Minimum/Maximum speed 0.62 mph / 4.97 mph (1 km/h / 8 km/h)
Mains voltage and frequency for power connection 90..240 V AC; 50..60 Hz
Electrical power consumption 1837 W
Current (fuse) approx. 6.7 A
Radio protocol for pulse signal transmission Bluetooth
Connection with smart devices Bluetooth 4.2
Maximum radiated transmitting power 3 mW
From 2023-05-03
• With the drawing and list, identify the required spare part and note the number.
• Contact our customer service and give the number of the spare part. You find
the contact details on the back of the manual or on our website.
• Clarify all further steps with our staff.
Under the following link you will find the exploded view and the spare parts list:
https://sportstech.link/us/swalk_spareparts
Exploded drawing/spare parts list

54
Disposal
Waste electronic products must be handed over to a designated collection point for disposal to be
recycled in an environmentally sound manner. Improper disposal of this product could result in harm
to the environment or to human health. Check with your local waste authority or the retailer where you
purchased this product for available collection facilities or further recycling advice.
Please avoid the generation of waste from electrical products as much as possible, e.g. by giving
preference to products with a longer service life or by reusing electrical products instead of disposing
of them.
You are responsible for deleting any personal data from this product before disposing of it.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting
to computer or peripheral devices. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
IMPORTANT: To satisfy exposure compliance requirements, the antenna and transmitter in the
console must be at least 8 in. (20 cm) from all persons and must not be near or connected to any other
antenna or transmitter.
Note: The FCC ID is located on the product
1. Important Safety Notes
PERSONAL REQUIREMENTS
GENERAL REQUIREMENTS
WARNING! Danger of health damage or even death due to improper or excessive training! Using the device
is strenuous for the circulation and the musculoskeletal system.
• The intensity of use (speed and incline) may never exceed the current fitness of the user.
• Always pay attention to physical signals. The pulse measurement and other metrics may be inaccurate.
Values should be used for recerence only.
• Stop the training immediately in case of discomfort, weakness, body aches, chest pain, nausea,
shortness of breath or similar, and consult a physician if necessary.
• If necessary, seek medical advice before training; especially if you are older, have medical problems or
have little experience with physical training.
• People with limited abilities or lack of experience may only use the device with a suitable supervisor and at
low speed.
WEIGHT AND AGE REQUIREMENTS
• Only adult persons are allowed to use the device.
• The maximum permissible user weight is 286 lb (130 kg).
• Children under 14 years of age may never use the device or perform any cleaning or maintenance tasks
on the device.
GENERAL CONDITIONS OF USE
• Do not use the device commercially, but only for home use. Do not use the device for therapeutic purposes.
• Children and animals must be kept at a safe distance of at least 10 ft (3 m) from the device. The moving
running belt is particularly dangerous.
• This device is for indoor use only. Keep liquids away from the device (e.g. drinking water or wet hands).
If the device has been spilled with liquid, immediately disconnect it from the electrical supply outlet.
Make sure it is completely dry before the next use; also on the inside. If necessary, contact customer service.
UNPACKING AND SETTING-UP
• DANGER! Risk of suffocation! Keep plastic bags and the like away from children and pets.
• Keep the packaging material during the return period to facilitate a possible return of the goods.
Dispose of the packaging material later in accordance with local regulations (e.g. recycling).
• Only set up the device on a firm, level surface in dry indoor areas. Protect sensitive surfaces with a heat-
resistant mat: The engine compartment can get hot.
• Set up the device with sufficient clearance in all directions; in particular, maintain a clearance of at least
6.6 ft (2 m) behind the device (see section "Setting up the device").
• Ensure that all ventilation openings of the engine compartment are free and clean. If there is a carpet
under the device, it may not touch the underside of the device.
WARNING! Danger from improper use!
• Read all instructions and safety notes before using the device. Follow them carefully.
• Danger of health damage or even death due to improper or excessive training!
• The device is not suitable for medical purposes and high accuracy applications.
• Also apply common sense to prevent risks.
IMPORTANT SAFETY NOTES continue on the next page ==>

76
ENSURE IMMEDIATELY BEFORE EACH USE
• Perform visual inspection before each use; especially check and correct the following:
- Is the device standing safely and stable?
- Is the running belt sufficiently lubricated, aligned centrally and sufficiently tensioned?
- Are all connections (screws, nuts, etc.) tight ?
- Is the cable intact?
- Is the area around the device free from accident hazards such as sharp-edged objects, furniture, and
other objects?
• In the event of any defect in the device or the cable, do not use the device, but secure it against any use and
arrange for repair.
• Only use the device with correct electrical values and original cables with protective earthing. Do not use a
distribution socket. Protect cables from heat and mechanical damage.
• Only use the device with non-slip sports shoes. Never use heels or spikes. Do not use it barefoot or on socks.
• If using shoelaces, ensure that they are tied short and tight.
• Do not use the device with loose clothing, long shoelaces or towels that could get caught.
• Do not use the device with jewelry or loose objects.
• Do not use the device under the influence of alcohol, medication or drugs.
DURING USE
• The device may only be used by one person at a time.
• Entering and starting the device:
- Only enter the device when the running belt is at a standstill.
- Start the device at the lowest speed.
• When using the device:
- Increase speed only when the user is walking or running safely. Change speed only slowly.
- Never overexert yourself.
- Only walk or run forwards; never sideways or backwards.
- Do not stop walking or running while the belt is still moving.
• Stopping and dismounting the device:
- For stopping, slowly reduce speed to a standstill (Speed +/- buttons).
- Only dismount the device when the running belt is at standstill. Step off the device to the side.
• Do not eat or drink on the device.
• Keep liquids and dirt away from the device.
• Do not use sprays on or near the device
IMMEDIATELY AFTER USE
• Turn off the switch next to the cable socket. Carefully disconnect the power cable from the device.
• Perform a visual inspection again: Is the device clean and intact?
CLEANING, MAINTENANCE, ADJUSTING, STORING
• Perform maintenance tasks and adjustments regularly, but only according to the instructions.
• Never switch on the device in storage position.
• Store the device and power cord out of the reach of children and animals.
• Store the device in a dry, clean place protected from frost, heat and sunlight.
HANDLING THE POWER SUPPLY
• Use the original power supply with the correct cable. Use it only if it is in perfect condition. Use it only indoors.
• Make sure that the connection values on site are within the permitted range.
• Place power supply and cables in such a way that there is no risk of tripping for you or others. Also, make
sure that the power supply and cables are not exposed to mechanical stress.
• Make sure that the power supply is never covered or passes under the treadmill and that there is always
sufficient ventilation during operation; to avoid overheating. Let the power supply cool down before storing
it after use.
• Always keep the power supply and cables away from the following and other sources of danger: moisture or
water, aggressive substances, flammable or explosive substances, heat sources, sharp- edged or pointed
objects, especially metal and the like.
• If the power supply has defects (e.g. unusual smell), disconnect it from the electrical supply outlet; if possible
without contact: switch off the fuse that supplies the socket in question.
• Any repairs may only be carried out by qualified and authorized persons.
• An irreparable power supply unit must be disposed of as separate electrical waste in accordance with local
regulations.

98
SAFETY STICKERS
The safety stickers must be at the positions shown in the following figure.
• Make sure they are always intact and fully readable.
2. Setting up, Storing
2.1 SETTINGUP
Find a location for the device that meets the following requirements:
• Dry interior
• Device does not cover any ventilation openings.
• Heat-resistant robust base; use floor protection mat if necessary
• Clearance of at least 6.6 ft (2 m) behind the device.
• Clearance of at least 3.3 ft (1 m) on both sides of the device.
• Clearance of at least 1.0 ft (30 cm) in front of the device.
2 m
1 m
0,3 m
1 m
3.3ft
(1m)
1ft (0,3m)
3.3ft
(1m)
6.6ft
(2m)
2.2 OPTIONAL: FIXING THE PADS FOR STORING
• Loosen the two screws in the back of motor cover (see figure below).
• Attach the two pads to the groove. Fix them with the two screws by the Hex wrench provided.
2.3 STORING
• Store the device out of reach for
animals and children.
• Store in dry and clean indoor environment.
Protect against direct sunlight.
Protect against dust.
TIME: Elapsed time in minutes and
seconds during current training.
SPEED: Current speed (between
0.6 mph and 3.7 mph).
DISTANCE : Walked distance
during current training.
CALORIES: Burned calories (kcal) during
current training (estimated value).
Pulse measuring
device connected
Currently active program (P1-P4)
LEDs active
3. Control
3.1 DISPLAY
WARNING: This product can expose
you to lead, which is known to the State of
California to cause cancer and birth defects
or reproductive harm. (For more information
go to www.p65warnings.ca.gov)
WARNING!
Risk of injuries from moving belt !
• Keep children and animals away from the treadmill.
• Do not move fingers, feet or other limbs
or objects under the moving belt.
• Always wear suitable footwear for training.
• Make sure the belt is always properly
tensed and centered.
• Reduce speed to full stop before descending.
Risk of electrical shock !
• Do not open the motor cover.
• Use the device only on a properly grounded socket.
*KEEP YOUR HANDS AND FEET AWAY
FROM THE CROSSBAR WHILE THE
TREADMILL IS IN OPERATION.
DANGER!!
WARNING
*DUE TO THE HEAVY MACHINE WEIGHT,
DO NOT TRY TO LIFT AND MOVE THE
TREADMILL UNLESS IT IS IN FOLDING
POSITION.
PASS THE POWER CORD
THROUGH THE BASE OF
CROSSBAR.
POWER CORD
*Stand only on the
side rails when
starting or stopping
treadmill.
*Never allow children
on or around the
treadmill.
*Remove the safety
key when treadmill
is not in use.
*Keep clothing,
ngers, and hair
away from moving
parts.
*Never try to adjust
or x the belt while
it is moving.
*Always wear athletic
shoes while operating
the treadmill.
Change speed in small increments.
Hold handrails to prevent falling,
and always wear the safety clip
while operating the treadmill.
Stop if you feel faint, dizzy, or
short of breath.
Fully engage the storage latch
before the treadmill is moved
or stored.
Incline should be set to zero
before folding the treadmill into
a storage position.
Serious injury can occur if proper
precautions are not followed.
Electrocution hazard.
DANGER
Sportstech Brands USA Corporation
444 Brickell Ave Ste 700 Miami,
FL 33131-2455

1110
3.2 REMOTE CONTROL
Start/stop training in free mode or with preselected program.
• In standstill: Select a training program (P01-P04).
Press several times until the desired program number is displayed.
• Hold for 3 seconds to switch on or off the light strips.
Increase speed.
Decrease speed.
4. Training
4.1 OVERVIEW OF THE TRAINING OPTIONS
• Free training with manual setting of speed.
• Training with 12 preset programs with target value for duration or distance
WARNING! Heart rate monitoring systems may be inaccurate. Values should only be
used as reference. Over exercising may result in serious injury or death. If you feel
faint stop exercising immediately.
• Do not overexert yourself or others when performing the training! Always respect
individual general and daily fitness!
4.2 CHOOSING AND MONITORING THE TARGET PULSE
The pulse rate in BPM ('Beats per Minute') indicates very well if you are training according to your target
and your current personal fitness level. The BPMs for the targets depend not at least on the age. You
should monitor your pulse in a suitable way.
• For heart rate measurement you can put on a heart rate belt or a heart rate wristband.
Select a guide value for your target pulse as follows:
• Select your age in the graphic on the right.
• Below, your age-typical maximum pulse (MHR) is shown as an estimated value.
The Selection graph A allows
to determine a Target pulse
range.
• From your age value, go
up into the colour field
which corresponds to your
training target.
• Then go straight to the left
and read the target pulse
range from the scale.
BPM (Ranges)
Selection graph
AGE 20 25 30 35 40 45 50 55 60 65 70
MHR 200 195 190 185 180 175 170 165 160 155 150
190
170
150
130
110
90
70
High Intensity (!)High Intensity (!) >>90 %90 %
MHRMHR
Anaerob -Anaerob - 82 .. 90%82 .. 90%
Aerob 2 -Aerob 2 - 74 .. 82%74 .. 82%
Aerob 1 -Aerob 1 - 66 .. 74%66 .. 74%
Fat burning -Fat burning - 58 .. 66%58 .. 66%
Warm up / Cool -Warm up / Cool - 50 .. 58%50 .. 58%
RegenerationRegeneration <<50%50%
In any case:
• Check if the determined target pulse suits your needs. If not, re-adjust it until you've found your
individual optimum value.
4.3 STRETCHING FOR WARMING UP AND COOLING DOWN
• To begin your training session, do some stretching. Never overstretch your muscles.
• We recommend performing each of the following excercises 10 times and to repeat the complete cycle
up to five times. Then make your training according to your personal fitness level.
• After training, also do stretching exercises to properly cool down.
HEAD ROLLS
Rotate your head to
the right for one count,
feeling the stretch up
the left side of your
neck, then rotate your
head back for one count,
stretching your chin to
the ceiling and letting
your mouth open. Rotate
your head to the left for
one count, then drop
your head to your chest
for one count.
1
SHOULDER
LIFTS
Lift your right shoulder
toward your ear for one
count. Then lift your left
shoulder up for one
count as you lower your
right shoulder.
2
SIDE
STRETCHES
Open your arms to the
side and lift them until
they are over your head.
Reach your right arm as
far toward the ceiling as
you can for one count.
Repeat this action
with your left arm.
3
QUADRICEPS
STRETCH
With one hand against
a wall for balance, reach
behind you and pull
your right foot up. Bring
your heel as close
to your buttocks as
possible. Hold for 15
counts and repeat
with left foot.
4
INNER THIGH
STRETCH
Sit with the soles of your
feet together and your
knees pointing outward.
Pull your feet as close to
your groin as possible.
Gently push your knees
toward the floor. Hold
for 15 counts.
5
INNER THIGH
STRETCH
Sit with the soles of your
feet together and your
knees pointing outward.
Pull your feet as close to
your groin as possible.
Gently push your knees
toward the floor. Hold
for 15 counts.
6
HAMSTRING
STRETCHES
Extend your right leg.
Rest the sole of your
left foot against your
right inner thigh. Stretch
toward your toe as far
as possible. Hold for 15
counts. Relax and
then repeat with left leg.
7
CALF / ACHILLES
STRETCH
Lean against a wall with
your left leg in front of
the right and your arms
forward. Keep your right
leg straight and the left
foot on the floor; then
bend the left leg and
lean forward by moving
your hips toward the
wall. Hold, then repeat
on the other side for 15
counts.
8
4.4 FREE TRAINING
• When you are ready, press the Start button on the console. The treadmill starts moving.
• Set your feet on the treadmill in quick succession and start walking.
• If desired, change the speed and/or incline of the treadmill with the corresponding buttons on the
control panel. Never overexert yourself!
• If you want to stop the training, press the 'Stop' button on the control panel.
• If a target value is set, the computer stops automatically when it is reached.

1312
https://sportstech.link/us/swalk
Scan here for
Manuals, eBooks etc.
Further information
We are also on Social Media!
Product information, training content
and much more:
Instagram-page
https://www.instagram.com/
sportstech.official/
Facebook-page
https://www.facebook.com/
sportstech.de
4.5 TRAINING IN PROGRAM MODE P01P04
The computer offers 4 programs (P01-P04). The speed progress in each program is shown below.
• Press the button on the remote control until the number of the desired program is shown.
• Press the START/STOP button on the remote control to begin the training.
• If desired, adapt the speed with the + / – buttons on the remote control.
• If desired, interrupt the training with the START/STOP button on the remote control.
4.6 STEPPING OFF IN AN EMERGENCY
If for example dizziness or pain occurs during exercise, dismount as follows:
A. Stop the treadmill with the START/STOP button on the remote control. Wait until the belt has come
to a standstill. Then carefully step off to the side.
B. If the remote control is currently not available, place your feet on the side surfaces. Then carefully
step off the treadmill without touching the moving belt. Switch off the treadmill.
MINUTE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
PROGRAM
P01
(mph)
1,5 1,5 1,5 1,5 2 2 1,5 1,5 1,5 1,5 1,5 1,5 22221,5 1,5 1,5 1,5
P02
(mph)
1,5 1,5 1,5 1,5 22222,5 2,5 2,5 2,5 22221,5 1,5 1,5 1,5
P03
(mph)
22222,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 22221,5 1,5 1,5 1,5
P04
(mph)
2,5 2,5 2,5 2,5 2,5 2,5 3 3 3 4 4 3 3 3 2,5 2,5 2,5 2,5 2,5 2,5
5. Bluetooth audio function
You can use the loudspeakers on the console to play audio from your terminal.
• Switch on the Bluetooth function on the playback device. Make the playback device visible in Bluetooth.
• Select 'BTMP3' from the list of nearby Bluetooth devices and pair with your playback device.
• Control playback and volume via your playback device.
®
SPORTSTECH LIVE APP
The Sportstech LIVE App offers you,
among other things:
• Individual workouts with professional trainers
• Landscape and outdoor videos
• Determining training priorities
• Training data in real time
• Training history and metrics
• Compete with others in Competition Mode -
collect trophies in Ranking
• Equipment-independent workouts, e.g. for yoga
Delicious and varied cooking recipes
...and much more!
6. Troubleshooting
Problem Possible reason Possible solution
Device does not switch
on or does not start
Power cable not plugged in Plug in the power cable
Electronic fuse has tripped Press the reset button next to the
power connection on the device.
Running belt slips Running belt not tightened enough Tension the running belt
Running belt faltering
during use
Running belt not lubricated enough Refill silicone oil
Running belt too tight Relax the running belt
Running belt not
centered Running belt unevenly tensioned Adjust the running belt centrally
In all cases of doubt, contact our customer service. You find the contact details on the last page.

1514
7.4 ADJUSTING THE RUNNING BELT
The running belt is tensioned at the factory. However, due to stretching, it may be necessary to re-tension
and readjust the running belt after some time. This is done via screws in the end caps of the running belt
frame, which can be turned with the Allen key supplied.
7.4.1 Checking the tension of the running belt
If the running belt slips when stepping on, when changing speed or already when switching on, it is
probably too weakly tensioned. However, the running belt may neither be too tight, as this increases the
wear of the ball bearings, among other things.
• Ensure that no children or animals approach the treadmill.
• Switch on the device and run the belt at 2.5 to 3.7 mph (4 to 6 km/h) and observe the run.
7.4.2 Uniform retightening of the running belt
• Turn the screws alternately on both sides evenly and carefully about a quarter turn clockwise to
increase the tension. Do not stretch too much.
• Check that the running belt is centered and adequately tensioned.
7.4.3 Relaxing the running belt
In rare cases, the running belt may be too tight. Then:
• Carefully turn the screw(s) about a quarter turn anticlockwise to reduce the tension.
• Check that the running belt is centered and adequately tensioned.
7.4.4 Adjusting the running belt centrally
• If the belt does not run centrally, the tension must be increased on the side to which it is drifting.
(drifting to the right => tighten slightly on the right or relax slightly on the left;
drifting to the left => tighten slightly on the left or relax slightly on the right)
• Retighten by a maximum of a quarter turn, then check the central running again.
Tool: Allen key
Example: Retightening the right-hand
bolt of the running belt
7. Cleaning and maintenance
7.1 CLEANING
• After each use, wipe sweat from the device with a slightly wetted cloth.
• Never allow moisture or humidity to reach the computer or other electrical or electronic components.
• Do not use abrasives or solvents.
7.2 MAINTENANCE
• Before and after each training session, check that the device is in perfect condition. Also check that
all fastening parts and protective covers are in place and intact. Tighten bolts and nuts if necessary.
7.3 LUBRICATING
For proper functioning and long life of the device, the running belt must be adequately lubricated with
silicone oil. There are thin tubes on the underside of the device as a lubrication system.
7.3.1 Lubrication and inspection intervals
• Refill with silicone oil after the first 25 hours of operation (or 2-3 months).
• Check the lubrication regularly.
• Top up with silicone oil at least every 50 operating hours (or 5-8 months).
• Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
7.3.2 Checking lubrication
• Make sure that the electrical supply plug of the device is disconnected.
• Lift the running belt on one side. Run your finger over the top of the running deck under the running
belt.
- If the running deck feels slightly oily, the lubrication is sufficient
- However, if the running deck feels dry, you need to top up with silicone oil.
7.3.3 Re-filling silicone oil
• Remove the protective cap of the oil system in the left rail of the treadmill.
• Carefully pour in a few drops of oil.
• Close the protective cap.
• Check lubrication as described.

Distributed by
Sportstech Brands USA Corporation
444 Brickell Ave Ste 700 Miami,
FL 33131-2455
https://sportstech.link/us/swalk
https://www.sportstech.care
[e-mail]