SSS Siedle SET 811-1 User manual

Produkt-
information
Siedle-Türsprech-Set
SET 811-1 /-2
SET 811-1 /-2 / 120 V
Siedle door intercom set
SET 811-1 /-2
SET 811-1 /-2 / 120 V
Kit interphone Siedle
SET 811-1 /-2
SET 811-1 /-2 / 120 V
Kit citofonico Siedle
SET 811-1 /-2
SET 811-1 /-2 / 120 V
Siedle-Deurspreek-Set
SET 811-1 /-2
SET 811-1 /-2 / 120 V
Siedle-dørtelefonsæt
SET 811-1 /-2
SET 811-1 /-2 / 120 V
Siedle-dörrhögtalarset
SET 811-1 /-2
SET 811-1 /-2 / 120 V

2
13
4
5
2b
2a

4
English
Installation
Range from the transformer to the
door station max. 50 m, transformer
to the in-house telephone 400 m
with 0.8 mm conductor material.
When operating two in-house
telephones in parallel, the range is
reduced to 200 m.
*) If only 1 HTS 811-... is connected,
the upper bell button can be used as
alight button (terminal Li). Use the
remote switching relay 12 V AC.
3Switch over if the bell button is to
be used as a light button. Set the
volume using the potentiometer.
4The secondary signal controller
NSC 602-... can be used in parallel
to an in-house telephone, e.g. to
actuate a radio-operated chime.
The NS 711-... can be operated as
an additional signalling unit in
parallel at an HTS 811-...
Lettering
5Exchange the name plates.
Specifications
• Protection system door
loudspeaker IP 54
•Dimensions:
Door station 85 x 290 x 35 mm
Telephone 90 x 200 x 45 mm
Transformer 53.5 x 89 x 60 mm
Siedle door intercom set
for one-family or two-family homes.
With the basic functions calling,
speech and door release. Illuminated
information panel.
Electrical voltage
Mounting, installation and
servicing work on electrical
devices may only be performed
by a suitably qualified electrician.
Scope of supply SET 811-1
•1Set door loudspeaker
STS 711-01
•1in-house telephone HTS 811-0
•1transformer TR 603-0
•This product information
Scope of supply SET 811-2
as described above, but
•2in-house telephones HTS 811-0
Scope of supply
SET 811-1 / 120 V
•1Set door loudspeaker
STS 711-01
•1in-house telephone HTS 811-0
•1transformer TRS 711-1
•This product information
Scope of supply
SET 811-2 / 120 V
as described above, but
•2in-house telephones HTS 811-0
Mounting
1Unscrew the front panel and
mount the door loudspeaker. Hinge
forward the loudspeaker fixture and
connect the cable.
Installation
2a Connect in accordance with the
terminal diagram.
2b Terminal diagram for 120 V
version.
The story call (ERT) at the in-house
telephone must not be connected.

©2006/05.06
Printed in Germany
Best. Nr. 0-1101/035829
S. Siedle & Söhne
Postfach 1155
D-78113 Furtwangen
Bregstraße 1
D-78120 Furtwangen
Telefon [phone]
Telefax [phone]
www.siedle.de
[email protected]