SSV Works JJL-CS65 User manual

SSV WORKS , 201 N. Rice Ave Unit A, Oxnard , CA 93030
www . SSVworks . com I Phone: [phone] I Fax: [phone]
WARRANTY INFORMATION:
All SSV Works enclosures are covered by alimited lifetime warranty against defects in
material or workmanship. All SSV Works Electronics are covered by alimited 1 year warranty
against defects in material or workmanship. All SSV Works Speakers are covered by a
limited 1 year warranty against defects in material or workmanship . Labor for replacement of
defective components is not covered. Contact SSV Works for further warranty information .
■ llll]iii•hll~~iffi•'+i•M~ ■ -5 mm Allen key
PARTS LIST IMAGES
PASSENGER DRIVER
JJL-CS65
2018+ Jeep Wrangler 4-Door Freedom Top
Cage Mounted Speaker Pods
A
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
1. JJL - CS65 pods (pair) (White Chroma Grilles sold separately) 2. MS x 30mm x4 (5mm Allen key)
I
INSTALLATION NOTES
Always disconnect the battery when installing electronic devices.
A. Pull the left and right trim pieces away from the rear of the sport bar .

■
B. Align the CS65 on the sport bar. For positive engagement and to
avoid cross threading the screws, maintain support of the CS65 while
setting the screws. Hand thread the (2) M8x30mm screws into the
sport bar. Using a 4mm Allen key, fasten the CS65 assembly to the
sport bar.
II
C. With the CS65's secured to the sport bar, loosen the tensioning knob
and rotate to the desired position.
D. This concludes the installation process. Connect the CS65's to your
audio source .
IIIDRKS
• JJL-CS65
© 2019 SSV Works, Oxnard, CA 93030 JJL-CS65 Rev. A 10-23-19