
Safety Guidelines
IGW/935 // Hardware Re erence
2 SAFETY GUIDELINES
lease read the following safety guidelines carefully! In case of property or personal damage by
not paying attention to this document and/or by incorrect handling, we do not assume liability. In
such cases any warranty claim expires.
OBSERVE RECAUTIONS FOR HANDLING – ELECTROSTATIC SENSITIVE DEVICE!
• The power supply should be in immediate proximity to the device.
• The power supply must provide a stable output voltage at 12..24 VDC ±10%. The output
power should be at least 10 W.
• lease pay attention that the power cord or other cables are not squeezed or damaged in
any way when you set up the device.
• Do NOT turn on the power supply while connecting any cables, especially the power cables.
This could cause damaged device components! First connect the cables and THEN turn the
power supply on.
• The installation of the device should be done only by qualified personnel.
• Discharge yourself electrostatic before you work with the device, e.g. by touching a heater
of metal, to avoid damages.
• Stay grounded while working with the device to avoid damage through electrostatic dis-
charge.
• The case of the device should be opened only by qualified personnel.