ST STEVAL-IDB007V Series User manual

Introduction
The STEVAL-IDB007Vx (STEVAL-IDB007V1/STEVAL-IDB007V2) is an evaluation board based on BlueNRG-1 (QFN32
package).
The STEVAL-IDB008Vx (STEVAL-IDB008V1/STEVAL-IDB008V2) is an evaluation board based on BlueNRG-2 (QFN32
package).
The STEVAL-IDB008V1M is an evaluation board based on BlueNRG-M2SA module (BlueNRG-2 QFN32 package).
The STEVAL-IDB009Vx (STEVAL-IDB009V1) is an evaluation board based on BlueNRG-2 (QFN48 package).
BlueNRG-1 (QFN32 package) and BlueNRG-2 (QFN32 and QFN48 packages) are low power Bluetooth® smart systems-on-
chip compliant with the Bluetooth® specification and support master, slave and simultaneous master-and-slave roles.
The document content is valid for the STEVAL-IDB007Vx, STEVAL-IDB008Vx and STEVAL-IDB009Vx platforms. Any specific
difference is highlighted whenever it is needed.
Getting started with STEVAL-IDB007Vx, STEVAL-IDB008Vx and STEVAL-
IDB009Vx evaluation boards
UM2094
User manual
UM2094 - Rev 7 - October 2021
For further information contact your local STMicroelectronics sales office.
www.st.com

1Development platforms
Figure 1. STEVAL-IDB007V1 development platform
This item is no longer available for sale
Figure 2. STEVAL-IDB007V2 development platform
based on BlueNRG-1 SoC
UM2094
Development platforms
UM2094 - Rev 7 page 2/14

Figure 3. STEVAL-IDB008V1 development platform
based on BlueNRG-2 SoC
Figure 4. STEVAL-IDB008V2 development platform
based on BlueNRG-2 SoC
UM2094
Development platforms
UM2094 - Rev 7 page 3/14

Figure 5. STEVAL-IDB009V1 development platform
based on BlueNRG-2 SoC in QFN48 package
Figure 6. STEVAL-IDB008V1M development platform
based on BlueNRG-M2SA module with embedded BlueNRG-2 SoC
UM2094
Development platforms
UM2094 - Rev 7 page 4/14

2Acronyms and abbreviations
Table 1. List of acronyms
Acronym Description
BLE Bluetooth low energy
DK Development kit
SW Software
USB Universal serial bus
UM2094
Acronyms and abbreviations
UM2094 - Rev 7 page 5/14

3Getting started
The evaluation board is preprogrammed with sensor profile firmware (BLE_SensorDemo.hex), which allows
setting and establishing a connection with a smartphone (iOS or Android).
Any Bluetooth Low Energy device like a smartphone can connect to the BLE sensor profile demo.
For example, the LightBlue application can connect to the sensor profile device. When you use the LightBlue
application, detected devices appear on the screen with the BlueNRG name. By tapping on the box to connect
to the device, the screen shows a list of all the available services; tapping a service shows the characteristics for
that service.
The sensor profile firmware implements a proprietary Bluetooth profile that exposes two services: acceleration
and environmental service.
The acceleration service contains the following characteristics:
• acceleration, which gives the current value of the acceleration detected by the MEMS sensor on the
evaluation board
• free fall characteristic, which allows detection of free-fall condition by the LSM6DS3 MEMS sensor on the
evaluation board (the condition is detected if the acceleration on the three axes is near zero for a certain
amount of time).
The environmental service contains characteristics that expose data from some environmental sensors, such as
temperature sensors.
3.1 Powering up the evaluation board running the sensor profile firmware
(peripheral role)
Two power options are available:
•Batteries - To power the selected evaluation board using batteries, 2 AAA batteries must be inserted into
the battery holder at the rear of the board, and jumper JP1 set to position 2-3 and jumper JP2 set to position
1-2 (Figure 7. Board power options).
Note: In battery operating mode, if R59, R60 and R62 resistors are mounted, you should remove them to make
LSM6DS3 function correctly.
•USB - To power the selected evaluation board through USB, jumper JP1 must be in position 1-2 and jumper
JP2 set to position 2-3 (Figure 7. Board power options ). Connect a USB cable to the micro-USB connector
(Figure 7. Board power options) and to a PC USB port.
Once powered, the evaluation board sensor profile firmware starts advertising, waiting for a smartphone to
connect to it.
UM2094
Getting started
UM2094 - Rev 7 page 6/14

Figure 7. Board power options
UM2094
Powering up the evaluation board running the sensor profile firmware (peripheral role)
UM2094 - Rev 7 page 7/14

4Software demonstration applications
• In order to develop a software application for the STEVAL-IDB007Vx, STEVAL-IDB008Vx or STEVAL-
IDB009Vx evaluation board, it is recommended to start with the reference demonstration applications
provided within the BlueNRG-1_2 DK SW package for BlueNRG-1, BlueNRG-2 BLE stack v2.x family
(STSW-BLUENRG1-DK) available on the STEVAL-IDB007Vx, STEVAL-IDB008Vx, STEVAL-IDB009Vx web
pages.
• Unzip the file, launch the related installer and follow installation steps.
• Wait for the package installation to complete.
• The Projects folder in DK SW package contains the available demonstration applications, IAR projects,
sources and header files.
• IAR Embedded Workbench for ARM (EWARM) tool is needed for building and downloading software
applications running on the BlueNRG-1, BlueNRG-2 microcontrollers.
Note: For a description of the available BlueNRG-1, BlueNRG-2 demonstration applications and supported platforms,
refer to BlueNRG-1, BlueNRG-2 development kits user manual available on the related web page. The
BLE_SensorDemo.hex prebuilt binary images for BlueNRG-1, BlueNRG-2 platforms are also provided within
the DK software package, in the Firmware folder.
Keil MDK-ARM and WiSE-Studio for ARM (GCC) toolchains projects are also available.
UM2094
Software demonstration applications
UM2094 - Rev 7 page 8/14

5References
Table 2. Reference information
What Where Description
BlueNRG-1 Bluetooth Low
Energy wireless System on
Chip
BlueNRG-1 BlueNRG-1 device web page
BlueNRG-2 Bluetooth Low
Energy wireless System on
Chip
BlueNRG-2 BlueNRG-2 device web page
Bluetooth Low Energy
Specification
https://www.bluetooth.org/en-us/specification/
adopted-specifications
Bluetooth Low Energy specification web
page
STSW-BLUENRG1-DK
STEVAL-IDB007V1, STEVAL-IDB007V2,
STEVAL-IDB008V1, STEVAL-IDB008V2 and
STEVAL-IDB009V1 web pages, Tools and
Software section
BlueNRG-1_2 DK SW package for
BlueNRG_1, BlueNRG-2 BLE stack v2.x
family, with reference demonstration
applications
STEVAL-IDB007V1(1) BlueNRG-1, Evaluation Tools section STEVAL-IDB007V1 platform web page
STEVAL-IDB007V2 BlueNRG-1, Evaluation Tools section STEVAL-IDB007V2 platform web page
STEVAL-IDB008V1(1) BlueNRG-2, Evaluation Tools section STEVAL-IDB008V1 platform web page
STEVAL-IDB008V2 BlueNRG-2, Evaluation Tools section STEVAL-IDB008V2 platform web page
STEVAL-IDB009V1 BlueNRG-2, Evaluation Tools section STEVAL-IDB009V1 platform web page
STEVAL-IDB008V1M BlueNRG-2, Evaluation Tools section STEVAL-IDB008V1M platform web page
UM2071
STEVAL-IDB007V1, STEVAL-IDB007V2,
STEVAL-IDB008V1, STEVAL-IDB008V2 and
STEVAL-IDB009V1 web pages
BlueNRG-1, BlueNRG-2 Development Kits
User Manual
1. This board is no longer available for purchase.
UM2094
References
UM2094 - Rev 7 page 9/14

Revision history
Table 3. Document revision history
Date Revision Changes
14-Jul-2016 1 Initial release.
19-Dec-2016 2 Updated STEVAL-IDB007V1 Bluetooth® low energy evaluation board on the cover page.
23-Oct-2017 3
Added: reference to STEVAL-IDB008V1 BlueNRG-2 evaluation platform, reference to BlueNRG-1_2
DK SW package for BLE stack v2.x family and reference to BlueNRG-1_V1 DK SW package for
BLE stack v1.x family.
02-May-2018 4 Updated Introduction.
Added references to STEVAL-ID007V2 and STEVAL-IDB008V2 evaluation platforms.
27-Nov-2018 5
Updated title and Introduction.
Added Section 1 Development platforms and references to the STEVAL-IDB009V1 evaluation
platform (BlueNRG-2 QFN48 package).
20-Mar-2019 6
Updated Section 3.1 Powering up the evaluation board running the sensor profile firmware
(peripheral role).
Removed references to BlueNRG-1_V1 DK SW package.
13-Oct-2021 7 Added reference to STEVAL-IDB008V1M development platform. Updated Section 3 Getting
started and Section 5 References.
UM2094
UM2094 - Rev 7 page 10/14

Contents
1Development platforms ............................................................2
2Acronyms and abbreviations ......................................................5
3Getting started ....................................................................6
3.1 Powering up the evaluation board running the sensor profile firmware (peripheral role) ....6
4Software demonstration applications ..............................................8
5References ........................................................................9
Revision history .......................................................................10
UM2094
Contents
UM2094 - Rev 7 page 11/14

List of tables
Table 1. List of acronyms ....................................................................5
Table 2. Reference information ................................................................9
Table 3. Document revision history ............................................................. 10
UM2094
List of tables
UM2094 - Rev 7 page 12/14

List of figures
Figure 1. STEVAL-IDB007V1 development platform .................................................2
Figure 2. STEVAL-IDB007V2 development platform .................................................2
Figure 3. STEVAL-IDB008V1 development platform .................................................3
Figure 4. STEVAL-IDB008V2 development platform .................................................3
Figure 5. STEVAL-IDB009V1 development platform .................................................4
Figure 6. STEVAL-IDB008V1M development platform ................................................4
Figure 7. Board power options ................................................................7
UM2094
List of figures
UM2094 - Rev 7 page 13/14

IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2021 STMicroelectronics – All rights reserved
UM2094
UM2094 - Rev 7 page 14/14