ST STEVAL-OET001V1 User manual

September 2016
DocID029674 Rev 2
1/10
www.st.com
UM2107
User manual
Getting started with STEVAL-OET001V1 LCP154DJF evaluation
board to validate lightning protection for SLIC transceivers
Introduction
The STEVAL-OET001V1 board is designed to validate lightning protection for SLIC transceivers.
The board complies with ITU-T K20/21/45 and GR1089-Core associated with the Cooper Bussmann
telecom circuit protector fuse (TCP 1.25 A).
Figure 1: STEVAL-OET001V1 evaluation board
All manuals and user guides at all-guides.com
all-guides.com

Contents
UM2107
2/10
DocID029674 Rev 2
Contents
1Board purpose, use and connections............................................5
2Schematic diagrams........................................................................6
3Bill of materials................................................................................8
4Revision history ..............................................................................9
All manuals and user guides at all-guides.com

UM2107
List of tables
DocID029674 Rev 2
3/10
List of tables
Table 1: STEVAL-OET001V1 bill of materials............................................................................................8
Table 2: Document revision history ............................................................................................................9
All manuals and user guides at all-guides.com

List of figures
UM2107
4/10
DocID029674 Rev 2
List of figures
Figure 1: STEVAL-OET001V1 evaluation board........................................................................................1
Figure 2: One POTS line connection..........................................................................................................5
Figure 3: STEVAL-OET001V1 circuit schematic........................................................................................6
Figure 4: LCP154DJF connections.............................................................................................................7
All manuals and user guides at all-guides.com

UM2107
Board purpose, use and connections
DocID029674 Rev 2
5/10
1 Board purpose, use and connections
The goal of this evaluation board is to validate lightning protection for SLIC transceivers.
The board is able to protect four POTS lines. Several boards can be used if the number of
POTS lines is higher than four.
To use the board:
connect the lines in female RJ11 “LINEx” connectors (LINE1, LINE2, LINE3 and
LINE4)
plug cables to the “SLICx” connectors (RJ11 plug 6P4C) (cables are not provided)
plug the other end of the cable to the RJ11 SLIC transceiver
connect -Vbat from SLIC between GATE (GATE1, GATE2, GATE3 and GATE4) and
GND (GND1, GND2, GND3 and GND4); e.g., VGATE-GND = -Vbat = -48 V
In Figure 1: "STEVAL-OET001V1 evaluation board", each POTS line has a LCP154DJF
and a 220 nF capacitor connected between GND and GATE, a female RJ11 to be
connected to the line (LINE1, LINE2, LINE3 and LINE4) and a female RJ11 to be
connected to the SLIC (SLIC1, SLIC 2, SLIC3 and SLIC4).
The following figure shows the LCP154DJF connection schematic for one line.
Figure 2: One POTS line connection
All GND are connected.
All manuals and user guides at all-guides.com

Schematic diagrams
UM2107
6/10
DocID029674 Rev 2
2 Schematic diagrams
The following figure shows the board schematic. Each line has 1 x LCP154DJF, 1 x 220 nF
capacitor connected between GND and GATE, 1 female RJ11 to be connected to the line
(labelled: LINE1, LINE2, LINE3 and LINE4) and 1 female RJ11 to be connected to the
SLIC (labelled: SLIC1, SLIC 2, SLIC3 and SLIC4).
Figure 3: STEVAL-OET001V1 circuit schematic
J1 LINE1
1
2
3
4
5
6
GND3
PLUG 4 mm
1
GATE3
PLUG 4 mm
1
C1
220n
F4
FUSE F8
FUSE
F3
FUSE
J4 SLIC2
1
2
3
4
5
6
F7
FUSE
F6
FUSE
GND1
PLUG 4 mm
1
J8 SLIC4
1
2
3
4
5
6
F5
FUSE
J6 SLIC3
1
2
3
4
5
6
U2 LCP154DJF
J2 SLIC1
1
2
3
4
5
6
U4 LCP154DJF
U3 LCP154DJF
GATE1
PLUG 4 mm
1
U1 LCP154DJF
J3 LINE2
1
2
3
4
5
6
F2
FUSE
C2
220n
J7 LINE4
1
2
3
4
5
6
J5 LINE3
1
2
3
4
5
6
GND2
PLUG 4 mm
1
F1
FUSE
GATE2
PLUG 4 mm
1
C4
220n GATE4
PLUG 4 mm
1
C3
220n GND4
PLUG 4 mm
1
GSPG1507160920SG
All manuals and user guides at all-guides.com
all-guides.com

UM2107
Schematic diagrams
DocID029674 Rev 2
7/10
The figure below shows the connection of LCP154DJF associated with a SLIC.
Figure 4: LCP154DJF connections
See application note AN4876 on www.st.com for further LCP154DJF implementation and
performance details.
All manuals and user guides at all-guides.com

Bill of materials
UM2107
8/10
DocID029674 Rev 2
3 Bill of materials
Table 1: STEVAL-OET001V1 bill of materials
Item
Q.ty
Reference
Value
Description
Order code
Manufacturer
1
4
C1, C2, C3,
C4
1210
X7R
200 V
220 nF
220nF SMD
capacitor
MC1210B224K201CT
Multicomp
2
8
F1, F2, F3, F4,
F5, F6, F7, F8
1.25 A
Fuse Cooper-
Bussmann
TR2/TCP1.25-R
Eaton/
Bussmann
3
8
J1, J2, J3, J4,
J5, J6, J7, J8
RJ11 female
plugs
331-6409
R.S.
4
8
GND1, GND2,
GND3, GND4,
GATE1,
GATE2,
GATE3,
GATE4
plug 4
mm
4 mm
connectors
5
4
U1, U2, U3,
U4
Programmable
transient voltage
suppressor
LCP154DJF
ST
All manuals and user guides at all-guides.com

UM2107
Revision history
DocID029674 Rev 2
9/10
4 Revision history
Table 2: Document revision history
Date
Revision
Changes
31-Aug-2016
1
Initial release
01-Sep-2016
2
Minor text changes
All manuals and user guides at all-guides.com

UM2107
10/10
DocID029674 Rev 2
IMPORTANT NOTICE –PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications , and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2016 STMicroelectronics –All rights reserved
All manuals and user guides at all-guides.com