Stanley TLM99 User manual

ENGLISH
FRAN AIS
ESPANOL
Please read these instructions before operating the product.
STHT77138X/STHT77343 /STHT77361
TLM99 / TLM99s/ TLM99si
PORTUGUÊS

2
Contents
WARNING:
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀WARNING:
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀User Safety
t6TFS4BGFUZt-BTFS.FBTVSJOH5PPM%FTDSJQUJPOt#BUUFSZ*OTUBMMBUJPOt1SPEVDU0WFSWJFX5-.t1SPEVDU0WFSWJFX5-.TBOE5-.TJt1SPEVDU0QFSBUJPOt#MVFUPPUI0QFSBUJPOt4QFDJmDBUJPOt8BSSBOUZt&SSPS$PEFT

3
WARNING:
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀FCC Compliance
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀FCC Statement
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀
Canada, Industry Canada (IC) Notices
Class B digital circuitry of this device complies with Canadian ICES-003.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause
undesired operation of the device.
Under Industry Canada regulations, the radio transmitter(s) in this device may only
operate using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de
brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type
d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication
satisfaisante.


WARNING
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀CAUTION
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀BATTERY SAFETY
WARNING:฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀ALWAYS฀฀฀฀฀฀฀฀฀฀฀฀DO NOT฀฀฀฀฀DO NOT฀฀฀DO NOT฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀DO NOT฀฀฀DO NOT฀฀฀฀฀ALWAYS฀฀฀฀฀฀฀ALWAYS฀฀฀฀฀฀฀฀฀฀฀฀NOTE:฀฀฀฀฀฀฀฀฀฀NOTE: ฀฀฀฀฀฀฀฀฀฀฀฀฀

RECYCLING
DO NOT฀฀฀฀฀฀฀ALWAYS฀฀฀฀฀฀PLEASE RECYCLE฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀DECLARATION OF CONFORMITY
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀PRODUCT OVERVIEW
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀IEC 60825-1

฀฀฀฀฀฀฀฀฀฀฀฀฀5
4
1
3
2
Laser Measuring Tool Description

฀฀฀฀฀฀฀฀฀฀1
2
3
Battery Installation / Removal

฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀TLM99 ฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀Product Overview TLM99
LCD Screen Detail 'JH$'JH%

฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀TLM99s & TLM99si
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀Product Overview TLM99s & TLM99si
LCD Screen Detail 'JH&'JH'

Default measurement is from
the rear of the device
Measurement is from the
front of the device
2 sec. press to change measurement
reference from back to front of device
Product Operation
CHANGE MEASUREMENT REFERENCE POINT

Continuous
Measurement
Aim Laser
at target
Aim Laser
at Target
Press for
measurement
2 SEC
Start Continuous
Measurement
Press
for ON
Press to
Activate Laser


Stop Continuous
Measurement
Capture
Last Value
SINGLE MEASUREMENT
CONTINUOUS MEASUREMENT
N
N
N

Press to Change
Units (m/in/ft.)
2 sec.. Press
to Change
Units (m/in/ft.)
TLM99
FUNCTION TLM99s / TLM99si
FUNCTION
Press x2
to Activate
“+”
Press x1
to Activate
“+”
Press x2
to Activate
“+”
Press x1
to Activate
“+”
Measure to
Subtract from
Previous
Measurement
Measure to
Add to
Previous
Measurement
Measure to
Subtract from
Previous
Measurement
Measure to
Add to
Previous
Measurement
Measure
Measure
Measure
Measure
SUBTRACTION SUBTRACTION
UNITS UNITS
ADDITION ADDITION

Measure length and
width to find AREA
Press to Measure
Distance 1฀Press to Measure
Distance 1฀Press to Measure Distance 2฀Press to Measure Distance 3฀Press to Measure
Distance 2
Press to select
Area Measurement
Measure length, width
and height to find VOLUME
Press x2 to select
Volume measurement
AREA
VOLUME


HOME CENTER
SAVE
SOLD
EXPORT
PDF
DXF
JPG
Bluetooth operation: TLM99s and TLM99si
Press to measure
distance 1
1 Download STANLEY®
floor plan app to your
smartphone or tablet
2 Capture your room
or space
3 Pair with device via
STANLEY®floorplan app.
4 Verify room/space
measurements
5 Save/share floorplans

“THE BLUETOOTH®WORD MARK AND LOGOS ARE REGISTERED
TRADEMARKS OWNED BY BLUETOOTH SIG, INC.AND ANY USE OF SUCH
MARKS BY STANLEY TOOLS IS UNDER LICENSE. OTHER TRADEMARKS
AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS.”

Range
TLM99 0.1 m to 30 m (4” ft. to 100 ft.)
TLM99s 0.1 m to 30 m (4” ft. to 100 ft.)
TLM99si 0.1 m to 35 m (4” ft. to 115 ft.)
Measuring accuracy typ.: ± 2.0 mm* / ± 0.12 in*
Resolution 1 mm // 1/16 in
Laser Class 2
Laser Wavelength 620-690 nm, Power < 1 mW
Autom. power switch-off after 180 s
Battery life (2 x AA) up to 3000 measurements (2500 with
Bluetooth®)
Dimension (H x D x W) 119 x 58 x 28 mm (4.68 x 2.28 x 1.10
in)
Weight (with batteries) 100 g / 3.21 oz
Storage Temperature range -25 to 70 °C (-13 to 158 °F)
Operating Temperature range -0 to 40 °C (-32 to 104 °F)
*under favorable conditions (good target surface,room temperature) up to 10 m (33 ft.). Under unfavorable conditions
such as bright sunlight, a very weakly reflecting target surface or large temperature fluctuations,the error can increase
by ± 0.25 mm/m (± 0.003 in/ft.) for distances over 10 m (33 ft.).
Specifications


STANLEY warrants this product for a period of (2) years against deficiencies in material
and workmanship. This LIMITED WARRANTY does not cover products that are improperly
used, abused, altered or repaired. Please call 866-786-5924 for more information or return
instructions. Unless otherwise noted, STANLEY will repair without cost, any STANLEY
product found to be defective, including parts and labor charges, or at STANLEY’s option,
will replace such tools or refund the purchase price, less the amount for depreciation, in
exchange for the defective tool. THIS LIMITED WARRANTY EXCLUDES ALL INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so these limitations may not apply to you. This LIMITED
LIFETIME WARRANTY gives you specific legal rights that may vary from state to state. In
addition to the warranty, STANLEY Lasers are covered by: 30-Day Money Back Guarantee. If
you are not completely satisfied with the performance of your STANLEY Laser for any reason,
you can return it within 30 days from the date of purchase with a receipt for a full refund.
IMPORTANT NOTE: The customer is responsible for the correct use and care of the
instrument. Moreover, the customer is completely responsible for periodically checking
the accuracy of the laser unit, and therefore for the calibration of the instrument.
Calibration and care are not covered by warranty.
Warranty
YR

Code Description Corrective Action
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀Error Codes

Notes