Star Lab Mixer HC Instruction manual

QUICK USER GUIDE MIXER HC
These short instructions may only be used by trained personnel who are familiar with the
operating manual and the device. Observe the safety precautions.
Temperature Control and Mixing
Switch off „PROGR.“ function (see below).
Use
to set temperature, mixing frequency and/or time.
The device starts with temperature control/mixing.
After the time has elapsed, mixing ends,
however, temperature control continues.
Interval Mix
To switch on/off interval mix: Press longer than 2 seconds.
Control light will light when function is activated.
Use
to set temperature and total time.
To set mix time
use the keys
To set stop time
The device starts alternates continually between temperature control and
mixing. Mix – Pause, etc., until the total time has elapsed. Temperature
control is then continued.
Short_Instructions.indd 1 08.02.16 11:55

QUICK USER GUIDE MIXER HC
Progr.
To switch on/off „PROGR.“: Press longer than 2 seconds.
Control light will light when function is activated.
Use
to set temperature, mixing frequency and/or time for the
first mixing/temperature control run
(temperature control and mixing or interval mix).
to switch to the second mixing/temperature control run.
Use
to set temperature, mixing frequency and/or time for the
second mixing/temperature control run
(routine run or interval mix).
To switch back to the first mixing/temperature control run.
The device starts with the first mixing/temperature control run. After the time
has elapsed, it automatically starts with the second mixing/temperature control
run. Temperature control is then continued with the temperature nominal
value of the second run.
Short Mix
The device continues mixing with the set frequency as long as the key is
pressed.
© 2016. All rights reserved, including graphics and images.
Every effort has been made to ensure that the content of this publication is correct.
The manufacturer can not take responsibility for any errors or omissions.
Short_Instructions.indd 2 08.02.16 11:55