Star Lake INS8366A User manual

User’s Manual
Revision Date: Sep.1. 2022
INS8366A
Intel®Comet Lake-S 10th Processor with H410
Chipset Mini-ITX

INS8366A User’s Manual
Revision Date: Sep.1. 2022
1
Safety Information
Electrical safety
 To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the
system.
 When adding or removing devices to or from the system, ensure that the power cables for the devices are
unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing
system before you add a device.
 Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
 Seek professional assistance before using an adapter or extension cord. These devices could interrupt the
grounding circuit.
 Make sure that your power supply is set to the correct voltage in your area.
 If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
 If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your local
distributor.
Operation safety
 Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the
package.
 Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If
you detect any damage, contact your dealer immediately.
 To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
 Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become
wet.
 Place the product on a stable surface.
 If you encounter any technical problems with the product, contact your local distributor
Statement
 All rights reserved. No part of this publication may be reproduced in any form or by any means, without prior
written permission from the publisher.
 All trademarks are the properties of the respective owners.
 All product specifications are subject to change without prior notice

INS8366A User’s Manual
Revision Date: Sep.1. 2022
2
RoHS Compliance
Perfectron RoHS Environmental Policy and Status Update
Perfectron is a global citizen for building the digital infrastructure. We are committed to providing
green products and services, which are compliant with
European Union RoHS (Restriction on Use of Hazardous Substance in Electronic Equipment) directive 2011/65/EU, to be
your trusted green partner and to protect our environment.
In order to meet the RoHS compliant directives, Perfectron has established an engineering and manufacturing task force
to implement the introduction of green products. The task force will ensure that we follow the standard Perfectron
development procedure and that all the new RoHS components and new manufacturing processes maintain the highest
industry quality levels for which Perfectron are renowned.
The model selection criteria will be based on market demand. Vendors and suppliers will ensure that all designed
components will be RoHS compliant

INS8366A User’s Manual
Revision Date: Sep.1. 2022
3
Revision History
Revision Date (yyyy/mm/dd) Changes
V1.0 2022/09/01 First release
Packing List
Item Description Q’ty
1 INS8370A 1
2 CD(Drivier + User’s manual) 1
3 SATA Cable 1
4 SATA Power Cable 1
If any of the above items is damaged or missing, please contact your local
distributor.

INS8366A User’s Manual
Revision Date: Sep.1. 2022
4
Table of Contents
Safety Information ................................................................................................................................. 1
Electrical safety ............................................................................................................................. 1
Operation safety ............................................................................................................................ 1
Statement ...................................................................................................................................... 1
RoHS Compliance ................................................................................................................................... 2
Revision History ..................................................................................................................................... 3
Packing List ............................................................................................................................................ 3
Table of Contents ................................................................................................................................... 4
Chapter 1 : Product Introduction ............................................................................................................ 6
1.1 Specifications ........................................................................................................................... 6
1.2 Block Diagram ........................................................................................................................... 8
1.3 Board Placement ...................................................................................................................... 9
Chapter 2 : Jumpers and Connectors Loacation .................................................................................... 9
2.1 Jumpers And Connectors List .................................................................................................... 9
2.2 Jumper Setting........................................................................................................................ 10
Chapter 3 : AMI BIOS UTILITY ................................................................................................................. 16
3.1 Staring .................................................................................................................................... 16
3.2 Navigation Keys ...................................................................................................................... 16
3.3 Main Page ............................................................................................................................... 17
3.4 Advance Page ......................................................................................................................... 20
3.4.1 Onoard Device ............................................................................................................ 22
3.4.2 CPU Configuration ...................................................................................................... 25
3.4.3 Trusted Computing ..................................................................................................... 27
3.4.4 Super IO Configuration ............................................................................................... 28
3.4.5 Serial Port 1 Configuration ......................................................................................... 29
3.4.6 Serial Port 2 Configuration ......................................................................................... 30
3.4.7 Serial Port 3 Configuration ......................................................................................... 32
3.4.8 Serial Port 4 Configuration ......................................................................................... 33
3.4.9 Hardware Monitor...................................................................................................... 34
3.4.10 S5 RTC Wake Setting ................................................................................................. 35
3.4.11 Network Stack Configuration ................................................................................... 37
3.4.12 NVMe Configuration ................................................................................................ 38
3.5 Event Logs ............................................................................................................................... 39
3.5.1 Change Smbios Event Log Settings ............................................................................ 40
3.5.2 View Smbios Event Log .............................................................................................. 41

INS8366A User’s Manual
Revision Date: Sep.1. 2022
5
3.6 Security Page ......................................................................................................................... 42
3.6.1 HDD Security ............................................................................................................... 43
3.6.2 Secure Boot ................................................................................................................ 44
3.6.3 Key Management(Secure Boot Mode see to Custom) .............................................. 45
3.6.4 BIOS Update ............................................................................................................... 49
3.7 Boot Page ................................................................................................................................ 50
3.7.1 (List Boot Device Type) Drive BBS Priorities .............................................................. 53
3.8 Save & Exit Page ...................................................................................................................... 54

INS8366A User’s Manual
Revision Date: Sep.1. 2022
6
Chapter 1 : Product Introduction
1.1 Specifications
System
CPU 10th Gen Intel® Comet Lake LGA1200 Socket Processor / Core i9/i7/i5/i3 Processor, TDP
35/65W
Memory type DDR4 2933 MHz / 2 x 260-pin SO-DIMM / Max. 64GB (Non-ECC) Horizontal
Chipset Intel® H410
I/O Chipset Nuvoton NCT6126D
TPM TPM Header
H / W Monitor Temperature Monitor, Voltage Monitor, Fan Monitor
Watchdog 1-255 sec. or 1-255 min. software programmable and can be generate system reset
Smart Fan Control CPU FAN / System FAN
BIOS AMI BIOS
Expansion
M.2 1 x M.2 2242 / 2280 M key (Gen3 PCIe X4, SATAIII)
1 x M.2 2230 E key (PCIe, USB 2.0)
Mini PCIe 1 x Mini PCIe Full size (SATA/ USB)
PCIe Slot 1 x PCIe3.0 X4 slot
Display
Chipset Intel® HD Graphics
HDMI Up to 4K (4096 x 2160) @30 Hz
Display Port Up to 4K (4096 x 2304) @60 Hz
LVDS Up to 1920 x 1200 @60 Hz
Ethernet
Chipset Intel ® I219-LM Giga LAN + Intel ® I211-AT Giga LAN
Audio
Codec Realtek® ALC662/ALC888

INS8366A User’s Manual
Revision Date: Sep.1. 2022
7
Front I/O
USB3.1 4
Display port 1 x DP 1.2 ; 1 x HDMI 1.4
LAN 2
Audio 1 x Mic-in ; 1 x Line-out
Internal I/O
SATAIII 2
SATA Power 1(Header)
USB 5 x USB2.0(1 x USB share mPCIe)
Display I/O 1 x LVDS
1 x Backlight connector
Audio 1 x Stereo Speaker Header
GPIO 1 x MiAPI Header (10-bit)
Serial 4 (1 x Support RS-232/422/485)
Fan 1 x 4-pin CPU Fan Connector / 1 x 4-pin System Fan Header
Power 1xAT/ATX Mode Select Jumper / 1 x 4-pin ATX Power Connector
Others
1 x Front Audio Header (Mic-in / Line-out), 1 x CMOS Jumper,
1 x panel power select header,1 x SATA power,
1x buzzer header,1x Digital MIC
Mechanical and environmental
Form Factor Mini ITX
Power Type 12V DC-IN(Optional : 19V)
Dimension 170mm x 170mm
Operating
Temperature
ET : -20°C ~ 70°C
UT : -40°C ~ 85°C(Option)
Storage Temperature -40°C ~ 85°C
Relative humidity 10% to 95%, non-condensing
Standard Compliance
Standart Compliance CE / FCC
OS

INS8366A User’s Manual
Revision Date: Sep.1. 2022
8
OS Support Windows®10 64-bit
Linux(Support by request)
1.2 Block Diagram

INS8366A User’s Manual
Revision Date: Sep.1. 2022
9
1.3 Board Placement
Chapter 2 : Jumpers and Connectors Loacation
2.1 Jumpers And Connectors List
Label Function
1 ATX 4pin
2 PCIe x4 Slot
3 LGA1200 CPU socket
4 AT/ATX jumper
5 LVDS Back Light Header
6 LVDS connector
7 LVDS Back light select
8 COM Port Header
(RS232/422/485)
9 COM Port Header

INS8366A User’s Manual
Revision Date: Sep.1. 2022
10
(RS232)
10 COM Port Header
(RS232)
11 COM Port Header
(RS232)
12 SATA Port
13 SATA Port
14 SATA Power Header
15 USB2.0 Header
16 Front Audio header
17 TPM Header
18 CPU FAN
19 SYS FAN
20 Clear CMOS Header
21 Intrusion header
22 M.2 2280 M key
23 M.2 2230 E key
24 Full Size mini PCIE slot
25 MiAPI Header
26 DDR4 SODIMM socket
27 Panel power select
28 Speaker Header
29 Front Panel header
30 USB2.0 Header
2.2 Jumper Setting
Front Panel Header
PIN DEFINITION PIN DEFINITION
1
HDD_POWER_LED
2
POWER_LED_MAIN
3 HDD_LED# 4 POWER_LED_ALT
5 GND 6
POWER_SWITCH#
7
RESET_SWITCH#
8 GND
9 +5V_DC 10 Key(no pin)

INS8366A User’s Manual
Revision Date: Sep.1. 2022
11
LVDS Connector
PIN
DEFINITION
1
LVDS0_LINK3_CON_DP
2
LVDS0_LINK3_CON_DN
3
LVDS0_LINK2_CON_DP
4
LVDS0_LINK2_CON_DN
5
LVDS0_LINK1_CON_DP
6
LVDS0_LINK1_CON_DN
7
LVDS0_LINK0_CON_DP
8
LVDS0_LINK0_CON_DN
9
LVDS1_LINK3_CON_DP
10
LVDS1_LINK3_CON_DN
11
LVDS1_LINK2_CON_DP
12
LVDS1_LINK2_CON_DN
13
LVDS1_LINK1_CON_DP
14
LVDS1_LINK1_CON_DN
15
LVDS1_LINK0_CON_DP
16
LVDS1_LINK0_CON_DN
17
GND
18
3.3V/5V/12V
19
3.3V/5V/12V
20
3.3V/5V/12V
21
NC
22
VCC3
23
CABLE_ID2
24
GND
25
GND
26
LVDS0_CLK_CON_DP
27
LVDS0_CLK_CON_DN
28
GND
29
GND
30
CABLE_ID3
31
LVDS_DDC_SCL
32
CABLE_ID1
33
PS8625_BKLT_CTRL
34
LVDS1_CLK_CON_DP
35
LVDS1_CLK_CON_DN
36
NC
37
NC
38
NC
39
CABLE_ID4
40
NC

INS8366A User’s Manual
Revision Date: Sep.1. 2022
12
LVDS Backlight Header
PIN
DEFINITION
1
LVDS_BKTEN_R
2
LVDS_PWM
3
BKLT_PWR (12v)
4
BKLT_PWR (12v)
5
GND
6
GND
7
BRIGHT_UP
-
8
BRIGHT_DOWN
-
Dual USB2.0 Header
PIN
DEFINITION
PIN
DEFINITION
1
5V_USB
2
5V_USB
3
Data (negative)
4
Data (negative)
5
Data (positive)
6
Data (positive)
7
GND
8
GND
9 Key (no pin) 10 No Connect
Front Audio Header
PIN DEFINITION PIN DEFINITION
1
MIC 2 AUD_GND
3
MIC_BIAS
4 Presence
5
FP_OUT_R
6
AUD_SENSE_MIC_FP
7
FIO_SENSE
8 Key(no pin)
9
FP_OUT_L
10
AUD_SENSE_HP
Speaker Header
PIN DEFINITION
1 Front_L-
2 Front_L+
3 Front_R+
4 Front_R-
Serial Port Pin-Out
PIN RS232 RS422 RS485
1 DCD TX- DATA-
2 RXD# TX+ DATA+
3 TXD# RX- NC
4 DTR RX+ NC
5 GND GND GND

INS8366A User’s Manual
Revision Date: Sep.1. 2022
13
6 DSR NC NC
7 RTS NC NC
8 CTS NC NC
9 RI NC NC
CPU FAN Header
PIN DEFINITION
1 GND
2 +12V
3 CPU_FAN_TACH
4 CPU_FAN_CTRL
Clear CMOS Header
SATA Power Header
PIN DEFINITION
1 VCC3
2 GND
3 VCC
4 GND
5 12V
Panel Power Option
PIN DEFINITION
1-2 Clear CMOS
2-3 Normal(Default)
PIN DEFINITION PIN DEFINITION
1 Key(no pin) 2 VCC3
3 +12V 4 LCD_VCC_SEL
5 Key(no pin) 6 VCC

INS8366A User’s Manual
Revision Date: Sep.1. 2022
14
MiAPI Header
PIN DEFINITION PIN DEFINITION
1 MAPI_GPIO1 2 VCC
3 MAPI_GPIO2 4 MAPI_GPIO6
5 MAPI_GPIO3 6 MAPI_GPIO7
7 MAPI_GPIO4 8 MAPI_GPIO8
9 MAPI_GPIO5 10 MAPI_GPIO9
11 WD_Time 12 MAPI_GPIO10
13 Power Button 14 SMBUS_DATA
15 UART_TX 16 SMBUS_CLK
17 UART_RX 18 5VSB
19 GND 20 N/A
Intrusion Header
PIN DEFINITION PIN DEFINITION
1 INTRUDER_N 2 GND
3.3V
5V(Default)
12V

INS8366A User’s Manual
Revision Date: Sep.1. 2022
15
ATX 4pin connector
PIN DEFINITION PIN DEFINITION
1 GND 2 GND
3 12V IN 4 12V IN
AT/ATX Mode Jumper
PIN DEFINITION
1-2 AT Mode
2-3 ATX Mode(Default)

INS8366A User’s Manual
Revision Date: Sep.1. 2022
16
Chapter 3 : AMI BIOS UTILITY
This chapter provides users with detailed descriptions on how to set up a basic system configuration through the AMI
BIOS setup utility.
3.1 Staring
To enter the setup screens, perform the following steps:
 Turn on the computer and press the <Del> key immediately.
 After the <Del> key is pressed, the main BIOS setup menu displays. Other setup screens can be accessed from the
main BIOS setup menu, such as the Chipset and Power menus.
3.2 Navigation Keys
The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup utility hot keys can be
used at any time during the setup navigation process.
Some of the hot keys are <F1>, <F10>, <Enter>, <ESC>, and <Arrow> keys.
Left/Right The Left and Right <Arrow> keys moves the cursor to select a
menu.
Up/Down The Up and Down <Arrow> keys moves the cursor to select a
setup screen or sub-screen.
+− Plus/Minus The Plus and Minus <Arrow> keys changes the field value of a
particular setup setting.
Tab The <Tab> key selects the setup fields.
F1 The <F1> key displays the General Help screen.
F10 The <F10> key saves any changes made and exits the BIOS setup
utility.
Esc The <Esc> key discards any changes made and exits the BIOS
setup utility.
Enter The <Enter> key displays a sub-screen or changes a selected or

INS8366A User’s Manual
Revision Date: Sep.1. 2022
17
highlighted option in each menu.
3.3 Main Page
Field Name BIOS Vendr
Default Value American Megatrends
Comment This field is not selectable. There is no help text associated with it.
Field Name Core Version
Default Value 5.17
Comment This field is not selectable. There is no help text associated with it
Field Name Compliancy
Default Value UEFI 2.7 ; PI 1.6
Comment This field is not selectable. There is no help text associated with it

INS8366A User’s Manual
Revision Date: Sep.1. 2022
18
Field Name BIOS Version
Default Value Display the version of the BIOS
Comment This field is not selectable. There is no help text associated with it
Field Name Build Date and Time
Default Value Display build date of the BIOS
Comment This field is not selectable. There is no help text associated with it.
Field Name ME FW Version
Default Value ME Firmware Version.
Comment This field is not selectable. There is no help text associated with it.
Field Name Processor Information
Default Value Display the installed CPU brand.
Comment This field is not selectable. There is no help text associated with it.
Field Name Microcode Version
Default Value Display the CPU microcode revision.
Comment This field is not selectable. There is no help text associated with it.
Field Name Total Memory
Default Value Display the installed memory size.
Comment This field is not selectable. There is no help text associated with it.
Field Name Memory Slot1
Default Value Display the installed memory size of slot1.
Comment This field is not selectable. There is no help text associated with it.
Field Name Memory Slot2
Default Value Display the installed memory size of slot2.
Comment This field is not selectable. There is no help text associated with it.
Field Name Memory Frequency
Default Value Display the installed memory Frequency
Comment This field is not selectable. There is no help text associated with it.

INS8366A User’s Manual
Revision Date: Sep.1. 2022
19
Field Name SATA 1
Default Value Display the installed SATA device model/size of port 1
Comment This field is not selectable. There is no help text associated with it.
Field Name SATA 2
Default Value Display the installed SATA device model/size of port 2
Comment This field is not selectable. There is no help text associated with it.
Field Name SATA 3(M.2)
Default Value Display the installed SATA device model/size of port 3
Comment This field is not selectable. There is no help text associated with it.
Field Name SATA 4(mSATA)
Default Value Display the installed SATA device model/size of port 4
Comment This field is not selectable. There is no help text associated with it.
Field Name System Date
Default Value [Www mm/dd/yyyy]
Possible Value Www : Mon/Tue/Wed/Thu/Fri/Sat/Sun
mm : 1-12
dd : 1-31
yyyy : 1998-9999
Help Set the Date. Use Tab to switch between Date elements. Default Rangers
Year : 1998-9999
Months : 1-12
Days : Dependent on month Range of Years may vary
Field Name System Time
Default Value [hh :mm :ss]
Possible Value hh : 0-23
mm : 0-59
ss : 0-59
Help Set the Time. Use Tab to switch between Time elements.