
U2F-B32 Quick Setup Guide
Product Illustration and Parts List
The Indication of HDD Status
Please follow the instructions below to complete the hardware installation.
Hardware Installation
Place the system on a stable surface. Ensure that the vent is not blocked and that it is
installed in a well-ventilated area. (Please keep the product away from moisture and other
environment that might be harmful to the product)
1.
2.
3.
4.
Please check the product and accessories for any defect or missing parts. If you have any
questions, please contact your product supplier.
Please visit the official website - Download page (http://www.stardom.com.tw/STAR-
DOM2016/download.php) to download other related resources.
Put
memory card into slot.
Connect the power cord to the power adapter, connect the connectors at both ends to the
U2F-B32 and the power socket, and then start the U2F-B32.
After the computer is turned on, the storage capacity will be automatically recognized by the
operating system. After the storage capacity is recognized successfully, please format the
system according to your desired storage format and follow the instructions of the operating.
Important Notice
STARDOM is one brand under RAIDON TECHNOLOGY, INC.
Thank you for choosing STARDOM’s product.
The information provided in this manual was checked before publication, but the actual product
specifications may have changed before shipping; Latest product specifications and updates can be
found at www.STARDOM.com.tw or through your sales representative. No separate notifications will be
provided by our company.
If you have any questions about RAIDON products or would like to receive the latest product
information,
instruction
manuals,
or
firmware,
please
contact
[email protected] for
assistance.
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
Stardom Storage Solutions
V0.1 (V0.1 (Feb. 2023)
Front View
Fan
E
F
USB 3.2 Gen2 Type-C port (10Gbps)
G
H
Fan speed switch
I
Power socket
Power switch
HDD enclosure handle
A
B
HDD access light
C
HDD enclosure pin release
Rear View
Product Parts List
Status HDD Status Light
No CFE Red light always on
Data access Blue light flashing
CFE idle Blue light always on
The usable storage capacity of the hard disk after formatting will be less than the capacity
indicated on the hard disk.
To prevent data loss, do not remove U2F-B32 while the system is running.
Please always connect the USB cable to the computer to ensure the energy saving function
operating normally.
If the U2F-B32 needs to be shut down or disconnected, please ensure the HDD is safely
removed through your operating system before turning off the power.
We strongly recommend backing up important data stored on the U2F-B32 to another
storage device or a remote site. STARDOM will not be held liable for the damage or loss of
data you stored on the U2F-B32 .
1.
2.
3.
4.
5.
CFexpress Type B Slot
D
The following items should be inside the package upon opening:
Type B
Type B
C
B
A
D
D
Type B
Type B