Staubli 16BL-CP User manual

1 / 16
16BL-CP/PC
15.5882
16BL-CS/PC
15.5881
16BL-CP/...
16BL-CS/...
16BL-CP/FIX
15.5884
16BL-CS/FIX
15.5883
E470532
配件
Accessories
快速连接器
插头16BL-CP
插座16BL-CS
带AxiClamp和压接连接
Free connectors
Plug 16BL-CP
Socket 16BL-CS
with AxiClamp and crimp termination
目录
安全说明 2-3
工具要求5
概览6
电缆格兰头的橡胶密封圈准备7
电缆准备7
压接（压接类型）7
AxiClamp连接9
安装11
拆卸12
编码13
插入、测试及拔出程序14
安全锁15
检查16BL-CS密封15
配件16
Content
Safety Instructions ������������������������������������������������������������������� 2-3
Tools required������������������������������������������������������������������������������5
Overview �������������������������������������������������������������������������������������6
Preparing the rubber seal of the cable gland ��������������������������������7
Cable preparation ������������������������������������������������������������������������7
Crimping (crimp version) ��������������������������������������������������������������7
Cable termination with AxiClamp �������������������������������������������������9
Assembly�����������������������������������������������������������������������������������11
Disassembly ������������������������������������������������������������������������������12
Coding ��������������������������������������������������������������������������������������13
Plugging, test and unplugging procedures���������������������������������14
Locking pin��������������������������������������������������������������������������������15
Check 16BL-CS seal �����������������������������������������������������������������15
Accessories�������������������������������������������������������������������������������16
MA408 (中_英)
安装说明
MA408 (cn_en)
Assembly instructions

2 / 162 / 16
安全指令 Safety instructions
仅可使用Stäubli指定的组件和工具。自行装配时，切勿背离本手
册所述的制备及装配说明，否则Stäubli无法保证产品安全性或
性能达到官方技术参数。请勿以任何方式修改产品。
Use only the components and tools specified by Stäubli� In case
of self-assembly, do not deviate from the preparation and assem-
bly instructions as stated herein, otherwise Stäubli cannot give
any guarantee as to safety or conformity with the technical data�
Do not modify the product in any way�
可与Stäubli元件插合的非Stäubli原厂制造的连接器，在某些情
况下，某些制造商甚至将其描述为“与Stäubli兼容”，但该连接器
并不符合长期稳定安全的电连接要求，而且出于安全考虑，不得
与Stäubli元件插合在一起。因此，Stäubli对因此类连接器（即未
经Stäubli批准）与Stäubli元件插合而造成的任何损失不承担任
何责任。
Connectors not originally manufactured by Stäubli which can be
mated with Stäubli elements and in some cases are even de-
scribed as ”Stäubli-compatible” by certain manufacturers do not
conform to the requirements for safe electrical connection with
long-term stability, and for safety reasons must not be plugged
together with Stäubli elements� Stäubli therefore does not ac-
cept any liability for any damages resulting from mating such
connectors (i�e� lacking Stäubli approval) with Stäubli elements�
如您未遵守上述警告，则StäubliElectricalConnectors(Stäubli)
不承担任何责任。
Stäubli Electrical Connectors (Stäubli) does not accept any
liability in the event of failure to observe these warnings�
IEC 60417-6182
安装需电气专业知识 Installation, electrotechnical expertise
产品可由具备电气技能或受过此方面指导的人员依照适用的
安全法规进行装配或安装。
The products may be assembled and installed by electrically
skilled or instructed persons duly observing all applicable safety
regulations�
IEC 60417-6042
注意电击风险 Caution, risk of electric shock
请在断电状态下工作
操作电气装置时，请遵守五项安全规定。
各电气装置确定后，应按照规定顺序执行以下五项基本要求（除
非另有必要理由）：
• 完全分离;
• 确保不会重新连接；
• 确认无工作电压；
• 进行接地和短路；
• 针对临近带电部件提供防护。
任何从事此工作活动的人员均应具备电气技能或受过此方面指
导，或者由同等能力的人员监督。
来源：EN50110-1:2013
Work in a de-energized state
Follow the five safety rules, when working on electrical installa-
tions�
After the respective electrical installations have been identified,
the following five essential requirements shall be undertaken in
the specified order unless there are essential reasons for doing
otherwise:
•disconnect completely;
•secure against re-connection;
•verify absence of operating voltage;
•carry out grounding and short-circuiting;
•provide protection against adjacent live parts�
Any person engaged in this work activity shall be electrically
skilled or instructed, or shall be supervised by such a person�
Source: EN 50110-1:2013
最终应用时，还应检查电击防护。 Protection against electric shock shall be checked in the end-use
applications too�
IEC 60417-6070
在负载下请勿断开连接 Do not disconnect under load
允许带电插拔。 Plugging and unplugging when live is permitted�
Caution, hot surface
(IEC 60417-5041)
如果负载电流超过550A，请勿裸手触摸连接器。 Do not touch the connector with your bare hands if the current
load exceeds 550 A�

3 / 163 / 16
安全指令 Safety instructions
ISO 7000-0434B
注意 Caution
每次使用连接器前，需提前检查外部是否有缺陷(尤其是绝缘层）
如有安全疑虑，必须咨询专业人员或更换连接器。
Each time the connector is used, it should previously be inspect-
ed for external defects (particularly the insulation)� If there are any
safety concerns, an electrically skilled person must be consulted
or the connector must be replaced�
带外壳应用的连接器的防水功能可参考相关产品的IP保护等级。 The plug connectors are watertight in accordance with the
product specific IP protection class�
未插合的连接器必须防潮防尘。被污染的公母连接器不应插合使
用。
Unmated plug connectors must be protected from moisture and
dirt� The male and female parts must not be plugged together
when soiled�
史陶比尔集成 MULTILAM 连接元件的插座在交付前会直接在我
们的工厂进行润滑。
为优化插合，并降低插入力和延长连接系统寿命，我们建议也对
插头进行润滑。此操作可由操作人员可使用以下润滑剂在现场完
成：
-KlübertempGRUT18–100g
Stäubli sockets with integrated MULTILAM contact element are
lubricated directly in our factory before delivery�
For optimum mating with reduced plugging forces and longer
service life of the connector system, we recommend to lubricate
the plugs as well� The operator can do this on site with the fol-
lowing lubricant:
Klübertemp GR UT 18 - 100 g
连接器的技术规格取决于系统分类、IEC或UL（额定电压和电流）。
请参阅产品目录，了解更多信息。
The technical specifications of the connector vary depending on
the system classification, IEC or UL (rated voltage and current)�
For more information, please see the product catalog�
产品使用说明或技巧 Useful hint or tip
更多技术参数请见产品目录。 For further technical data please see the product catalog�
回收利用 Recycling
在拆卸和移除用过的部件时，确保进行正确处置。 When dismantling and removing parts from use, ensure that
they are disposed of properly�
适用领域 Range of application
新型、单极16BL插接系统针对能源供应企业和工业环境中的高要
求而设计。
常用于低压领域，
例如移动电源、移动应急发电机、活动场合供电，以及生产场所的
试验和测试场。
此外还用于铜导线借助母头和插头即时互相连接，以及/或者导体
应当可以连接嵌入式/明装式插座的应用情况。
该系统未经过EX保护，因此不得在爆炸性环境中使用。
明确定义了IP防护等级，不得超过该等级。
手动插接和分离插头和插口。
16BL在不含适配器和适配线的情况下，与16BV不兼容。
对于产品与其应用条件的兼容性如有任何疑问（例如关于烈性环
境、化学耐抗性等），欢迎联系您的史陶比尔联系人。
The new, single-pole 16BL plug connector system is designed
for high demands in energy supply companies and industrial
environments�
It is often used in the low-voltage range such as
mobile power supply, mobile emergency power generators,
event power supply, and test and inspection fields of production
facilities�
Furthermore, in applications where copper cables are inter-
connected on the fly using couplings and plugs and/or enable
connecting a conductor to a flush-mounted socket or panel
receptacle�
The system is not EX protected and must therefore not be used in
an explosive environment�
The IP protection is clearly defined and must not be exceeded�
The plugs and sockets are mated and unmated by hand�
The 16BL is not compatible with the 16BV without an adapter or
adapter cable�
In case of doubt about the product compatibility with its operat-
ing conditions (e�g� regarding aggressive environments, chemical
resistance, etc�), please contact your Stäubli representative�

4 / 164 / 16
TECHNICAL CONSIDERATIONS according to UL File E470532
Use:
For use only in (or with) complete equipment where the acceptability of the combination is determined by UL LLC�
Conditions of Acceptability:
These devices are not suitable for interrupting the flow of current by connecting or disconnecting the mating connector�
These devices have been investigated with the applicable requirements in the Standards UL 486A-486B only with reference to the
crimp contacts: they have been investigated and found in compliance with the applicable requirements of the mentioned standards�
The acceptability of the housing, gasket, cable gland, mounting means and any accessories should be investigated in the end use
application�
These devices have been investigated and tested when the crimp contacts are assembled on their intended cable size using the Crimp
Tool and Die indicated in the the manufacturer’s installation instructions�
The crimp contacts of these devices are suitable for factory and field wiring�
The power inlet 16BL-PP is for mounting on panel and is provided with stud and nut terminal and optional protective cover DE 16N,
optional angled adapter WA-ID/S21 and optional accessory switch MSW-16BL-PP indicating the locking status, rated 5 A, 125/250
VAC, 1 A, 48 VDC, for use with prepared conductors, as example ring cable lugs�
The power inlet 16BL-MP is for mounting directly onto bus bar using the stud and nut terminal� The acceptability of these connections
should be judged in the end use�
The suitability of the insulating materials for use at 1000 V rating has not been verified except for sign or luminaire as permitted by the
Standards UL 486A-486B�
The Dielectric test (puncture) was conducted at 3400 V ac based on a maximum voltage rating of 600 V� Any additional evaluation and
testing for use at more than 600 V should be considered in the end use�
These devices (full assembly) have been subjected to a Temperature test with the rated currents�
The devices shall be used with Copper Concentric Class B or Copper Compressed Class B or Copper Concentric Class 5 conductors
insulated for a minimum of 90°C�
The insulating material used in these devices to make the “housing” of the live parts complies with the direct support requirements of
UL 746C, the Standard for Polymeric Materials - Use in Electrical Equipment

5 / 165 / 16
1
2
Tab. 1
3
4
6
7
5
导线截面积
Conductor cross section 压模（适配器）
Crimping die (adapter)
mm2AWG/MCM
70 2/0 B17 (V1330)
95 4/0 B20 (V1330)
120 250 MCM B22 (V1330)
150 300 MCM B25 (V1330)
185 350 MCM 13CB27
240 500 MCM 13CB30
工具要求 Tools required
(ill. 1)
压接钳ELPRESSV1311C或
V1311C-A
带压模（参见表1）
(ill. 1)
Crimping pliers ELPRESS V1311C or
V1311C-A
with crimping die (see Tab �1)
注注注
操作说明MA069
wwwstaublicom/electrical
Note:
Operating instructions MA069
www�staubli�com/electrical
注注注
兼容性说明，取决于应用：
-IEC60228
-UL应用：电缆、铜线同心度B类或铜线
压缩B类或5级铜导线（绝缘层耐热温
度至少可承受90°C）。
Note:
Compatibility instructions, depend-
ing on application:
- IEC 60228
- UL applications: cable, Copper
Concentric Class B or Copper Com-
pressed Class B or Cooper Concen-
tric Class 5 conductors insulated for
a minimum of 90 °C�
(ill. 2)
剥线工具
(ill. 2)
Stripping tool
(ill. 3)
扭力扳手：
M32:10Nm(SW36)
M40:14,5Nm(SW45)
M50:20Nm(SW57)
(ill. 3)
Torque wrench and insert for cable
gland:
M32: 10 N m (36 mm)
M40: 14,5 N m (45 mm)
M50: 20 N m (57 mm)
(ill. 4)
开口扳手
电缆格兰头：
M32:SW45
M40:SW45
M50:SW57
(ill. 4)
Open-end spanner to counter�
Cable gland:
M32: 45 mm
M40: 45 mm
M50: 57 mm
(ill. 5)
螺丝刀
ISO2380-2A12x65
(ill. 5)
Screwdriver ISO2380-2 A 1�2 × 6�5
(ill. 6)
用于AxiClamp的扭力扳手
AX/95-120:78Nm(SW27)
AX/150-185:120Nm(SW27)
AX/240:160Nm(SW27)
(ill. 6)
Torque wrench for AxiClamp
AX/95-120: 78 N m (27 mm)
AX/150-185: 120 N m (27 mm)
AX/240: 160 N m (27 mm)
(ill. 7)
开口扳手
AX/95-120:SW22
AX/150-185:SW27
AX/240:SW28
(ill. 7)
Open-end spanner to counter�
AX/95-120: 22 mm
AX/150-185: 27 mm
AX/240: 28 mm

6 / 166 / 16
概览/Overview
插座/Socket 插头/Plug
注意
安装前请确保塑料绝缘套和金属插件匹配（插座/插头）
Attention
Make sure before mounting that you have the right
plastic/metal parts combination (socket/plug)
压接
Crimp termination
AxiClamp
压接
Crimp termination
AxiClamp

7 / 167 / 16
Tab. 2
8
>2 mm
>2 mm
Y
910
L
11
Ø E
12
13
观察孔
Sight hole
电缆准备 Cable preparation
(ill. 9 - 10)
将格兰头套入电缆，然后剥去长度L的电缆绝缘层（请参见第5页表
3的压接类型和第7页表4的AxiClamp类型）。
(ill. 9 - 10)
Slip cable gland onto the cable and strip cable insulation to length
L(see Tab� 3 page 5 for crimp version and Tab� 4, page 7 for
AxiClamp version)�
压接连接 （压接类型） Crimping (crimp version)
(ill. 11 - 12)
将所有导线插入压接套中至其停止。
必须能在观察孔中看到导线。
(ill. 11 - 12)
Insert all wires into the crimping sleeve until it stops� The wire
must be visible in the sight hole�
第二次压接
Second crimping
第一次压接
First crimping
电缆格兰头
Cable gland
含有内部橡胶密封圈
With inside rubber seal
Ø (mm)
不含内部橡胶密封圈
Without inside rubber seal
Ø (mm)
M32 15 – 20 20 – 25
M40 20 – 26 26 – 32
M50 31 – 35 35 – 41
准备电缆格兰头的橡胶密封圈 Preparing the rubber seal of
the cable gland
(ill. 8)
16BL-CS/和16BL-CP/系列的格兰头
包含一个由两部分组成的橡胶密封圈，
其需与线缆外径相匹配（参见表2）。
请丢弃未使用的橡胶密封圈部分。
(ill. 8)
The cable glands on the 16BL-CS/…
and 16BL-CP/… connector types con-
tain a two-part rubber seal that must be
adjusted to fit the outer diameter of the
cable (see Tab� 2)�
Please discard the unused part of
the rubber seal.
(ill. 13)
用Elpress压接工具V1311C或V1311C-A
及合适的插入件压接电缆。
观察压接区域Y和压接次数！
（参见第6页表3）。
(ill. 13)
Crimp the cable with the Elpress crimp-
ing tool V1311C or V1311C-A and the
correct insert�
Observe crimping zone Yand the num-
ber of crimping! (see Tab� 3, page 6)�
注注注
压接套上每一个压接点都要压接。
Note:
The crimp sleeve should be
pressed once for each crimp point�

8 / 168 / 16
Tab. 3
14
B**/13CB**
B**/13CB**
X
六角压接下表面
Lower face of the hexagonal crimping
六角压接上表面
Upper face of the hexagonal crimping
(ill. 14)
根据控制尺寸X确认压接（参见表3）。
(ill. 14)
Verify crimping according to control dimension X, (see Tab� 3)�
插座/插针 Socket/Pin 压模 Crimping die 电缆等级 (依据 IEC 60228) for cable class (acc. to IEC 60228)
线缆截面积 Conductor cross section 压接套内径 E Crimping sleeve inside Ø E
压接点数量 Number of crimping points
最大控制尺寸 Max. control dimension 剥线长度 Cable stripped length 最大压接区域 Max. crimping zone
mm2AWG/MCM mm X (mm) L (mm) Y (mm)
S+P-16BL70 B17 (V1330) 5/6 70 AWG 2/0 13 1 13.4 27 +2,0 28
S+P-16BL95 B20 (V1330) 5/6 95 AWG 4/0 15 1 16.4 30 +3, -1 30
S+P-16BL120 B22 (V1330) 5/6 120 250 MCM
(包括/incl. 262.6 MCM) 17 1 16.3 30 +3, -1 30
S+P-16BL150 B25 (V1330) 5/6 150 300 MCM
(包括/incl. 313.3 MCM) 19 1 20.3 30 +3, -1 30
S+P-16BL185 13CB27 5/6 185 350 MCM
(包括/incl. 373.7 MCM) 21 2 20.5 35 +4, -1 1) 35
S+P-16BL240 13CB30 5/6 240 500 MCM
(包括/incl. 535.3 MCM) 24 2 23.3 38 +5, -2 1) 38
1) 电缆直径 > 32 mm: 74 +8, -0
1) for cable diameters > 32 mm: 74 +8, -0

9 / 169 / 16
15
16
17
E
E
BA
~
截面积/Cross section = 240 mm2
截面积/Cross section ≤ 185 mm2
观察孔
Sight hole
AxiClamp连接 Cable termination with
AxiClamp
(ill. 15)
截面积达 185 mm²
(< 373.7 MCM):
将AxiClamp套B旋在锥形接触件上，并
拧紧至凹槽A前缘。
截面积 240 mm²
(500 MCM inkl. 535.5 MCM):
将AxiClamp套B旋在锥形接触件上，并
拧紧至凹槽A前缘。
(ill. 15)
Cross section up to 185 mm²
(< 373.7 MCM):
Screw the AxiClamp sleeve Bonto the
thread of the contact insert and tighten
as far as the front edge of the groove A�
Cross section 240 mm²
(500 MCM incl. 535.5 MCM):
Screw the AxiClamp sleeve Bonto the
thread of the contact insert and tighten
almost as far as the groove A, leaving a
gap of approx� 2 mm�
(ill. 16)
将线缆插入AxiClamp套中，直至线缆绝
缘层与AxiClamp套接触，并可在观察孔
中看到导线。
(ill. 16)
Firmly push lead and all individual wire
strands into the AxiClamp sleeve until
the lead insulation comes up against the
AxiClamp sleeve and the individual wire
strands can be seen in the sight hole�
(ill. 17)
用开口扳手22mm、27mm或28mm固
定套筒，然后用扭力扳手27mm旋紧
AxiClamp
(ill. 17)
Screw on the AxiClamp with the torque
wrench 27 mm (see Tab� 4, page 8)
and counter with open-end spanner
22 mm, 27 mm, 28 mm�
注注注
使用虎钳钳住开口扳手，然后用开
口扳手固定住带线缆的套筒，最后使
用扭矩扳手拧紧AxiClamp（参见第8
页表4）。
Note:
Clamp the open-ended wrench in a
vice, fit the AxiClamp with the inserted
lead into the clamped wrench, and
tighten with the torque wrench, (See
Tab� 4, page 8 for correct torque)�
注注注
拧紧的同时保持线缆在压接套内。
Important:
Keep lead pressed into sleeve while
tightening�

10 / 1610 / 16
Tab. 4
插座/插针 Socket/Pin 线缆级别（依据 IEC 60228) for cable class (acc. to IEC 60228)
线缆截面积 Conductor cross section AxiClamp套筒内径 AxiClamp sleeve inside Ø (ill. 15) 剥线长度 Cable stripping length (ill. 10) 扭力扳手 () Torque wrench size 开口扳手 Open-end spanner to counter 紧固扭矩 Tightening torque
mm2AWG/MCM E (mm) L (mm) (mm) (mm) (N m)
S+P-16BL/AX/95-120 5/6 95
120
AWG 3/0
250 MCM 16 26 27 22 78
S+P-16BL/AX/150-185 5/6 150
185
300 MCM
350 MCM 20 32 1) 27 27 120
S+P-16BL/AX/240 5/6 240 450 MCM
500 MCM 23 36 1) 27 28 160
1) 线缆直径 > 32 mm: 69 mm
1) for cable diameters > 32 mm: 69 mm

11 / 1611 / 16
M40 M50
18
19
20
M32
14,5 N m 10 N m
14,5 N m
14,5 N m 14,5 N m 20 N m
SW45
45 mm
SW45
45 mm
SW57
57 mm
SW36
36 mm
SW45
45 mm
(ill. 20)
将电缆格兰头拧到绝缘套上，并用扭矩145Nm拧紧。
然后用扭力扳手拧上螺母盖。
拧紧扭矩：
M32=10Nm
M40=14,5Nm
M50=20Nm
(ill. 20)
Screw cable gland on to the insulator and tighten with 14,5N m�
Then screw on the cap nut by means of the torque wrench�
Tightening torque:
M32 = 10 N m
M40 = 14�5 N m
M50 = 20 N m
安装 Assembly
(ill. 18)
将两片绝缘隔离半圆套装在金属件凹
槽中。
(ill. 19)
Place together the half shells of the
distance tube over the metal part in the
groove�
(ill. 19)
将带绝缘隔离套的导体插件滑入绝缘套
并转动至其平面重合。
压入并转动导体插件，直至其正确闩锁。
(ill. 19)
Slip the contact insert together with the
half shells of the distance tube into the
insulation and turn until the flat surfaces
coincide�
Press in and turn the contact insert until
it properly latches�

12 / 1612 / 16
21 22
23
SKIZZE
LWZ / 06.04.2022
SKIZZE
LWZ / 06.04.2022
拆卸 Disassembly
(ill. 21)
拧下电缆格兰头，然后将其滑入电缆上。
(ill. 21)
Unscrew the cable gland and slide it onto the cable�
(ill. 22 – 23)
请轻拉电缆并按压导体插入件，使其与绝缘套分离。
(ill. 22 – 23)
To loosen the connection, pull gently on the cable and apply light
pressure to the contact insert�
注注注
拧紧电缆格兰头时，确保螺母的五个面均衡受力。
Note:
When tightening the cable gland, take care that the forces
are evenly distributed over five faces of the nut�
注注
拧紧螺母盖时，请确保45mm或57mm在格兰头上而不是在
绝缘套上。
Attention
When tightening the cap nut, secure to 45 mm or 57 mm on
the cable gland and not to 45 mm on the insulation�

13 / 1613 / 16
名称
Designation
符号
Symbol
编码号
Coding-No.
相位/Phase 1 L1 C1
相位/Phase 2 L2 C2
相位/Phase 3 L3 C3
中性线/Neutral N C4
接地/Ground PE C5
直流电/Direct current - C6
直流电/Direct current + C7
地区/Region 相位/Phase 1
(L1)
相位/Phase 2
(L2)
相位/Phase 3
(L3)
中性线/Neutral
(N)
接地/Ground
(PE)
编码建议
Coding suggestion C1 C2 C3 C4 C5
欧洲
Europe
美国/USA
(120/ 208/ 240 V)
美国/USA
(277/ 480 V)
中国
China ()
编码 Coding
机械编码 Mechanical coding
从C1到C7，最多可以有7种机械编码方式。
建议使用以下编码保证互换性：
There is a maximum of 7 mechanical coding possibilities,
designated from C1 to C7�
The following coding is recommended to safeguard the inter-
changeability:
注注注
插头仅可插入相同编码的插座。
Note:
Plugs can only be inserted into sockets with the same code
no�
颜色编码 Coloured coding
除了机械编码，连接器还具有颜色编码。如此可以根据当地标准来
设计电气设备，并确保用户安全。
以下颜色可供选择：
2021 22 23 24 25 26 27 28 29 30 31
颜色编码依据
HD308S2:2001,IEC60445:2017,NEC2017:
In addition to the mechanical coding system, the connectors are
also available in color-coded format� This allows electrical installa-
tions to be planned according to regional standards and ensures
optimum user safety�
The following colors are available:
2021 22 23 24 25 26 27 28 29 30 31
Color code examples according to
HD308 S2:2001, IEC60445:2017, NEC2017:

14 / 1614 / 16
24
25
45°
16BL-CP/...
16BL-CS/...
16BL-CP/...
16BL-CS/...
45°
Logo 对齐
Logo lined up
标记/Marking
插入程序 Plugging procedure
(ill. 24)
插座上安全锁必须处于“打开”位置（第13页图26）。
插头和插座上的标记必须对齐。
使插头完全插入插座，然后将插座向右旋转45°，直到卡销锁紧。
如果需要，将安全锁转到关闭位置（第13页图26）。
(ill. 24)
The locking pin on the female connector must be in “open” posi-
tion (ill� 26, page 13)�
The markings on the plug and socket have to be lined up� Mate
plug with socket to the stop and turn the socket through 45° to
the right until the bayonet lock engages�
If desired, turn the locking pin to closed position (ill� 26, page 13)�
测试程序 Test procedure
扭转插头，测试连接器锁紧。
尝试直接拔出插头，测试表明在该位置时接头不能通过机械方式
分 开 。
By twisting the connectors test that the locking mechanism is
engaged�
By attempting to simply pull the connectors apart, test that the
connection in this position can no longer be mechanically separat-
ed�
注注注
只有在完全插入后才能实现正确联锁。
Note:
Correct interlocking is achieved only after engagement of the
sleeve�
拔出程序 Unplugging procedure
(ill. 25)
插座上的安全锁必须处于“打开”位置（参见第13页图26）。
拔出连接器，往回拉插座上的轴套，向左旋转45°直到停止。拆开
插头和插座。
(ill. 25)
The locking pin on the female connector must be in “open” posi-
tion (see ill� 26, page 13)�
To release, pull back the sleeve of the female connector and turn
the socket 45° to the left, until stop�
Separate male and female connectors�

15 / 1615 / 16
D
27
26
关闭
closed
打开
open
安全锁 Locking pin
(ill. 26)
插拔时，16BL-CS上的安全锁必须处于“打开”位置。
(ill. 26)
For plugging and unplugging, the locking pin on 16BL-CS��� must
be in the “open” position�
处于“关闭”位置时，安全锁可防止插头意外断开。 In “closed” position, the locking pin prevents accidental discon-
nection of the plug connector�
注注注
可以使用螺丝刀操作安全锁。
Note:
The locking pin can be operated with a screwdriver�
定期检查16BL-CS密封 Check 16BL-CS seal periodically
(ill. 27)
检查密封D是否有损坏，如有必要请更换。
类型27x4，订货号145228
(ill. 27)
Check seal Dfor damage and replace it if necessary�
Type 27 × 4, order no� 14�5228

16 / 1616 / 16
28
29
15.5881 15.5882
15.5884 15.5883
制造商/Producer:
Stäubli Electrical Connectors AG
Stockbrunnenrain 8
4123 Allschwil/Switzerland
Tel. [phone]
Fax [phone]
mail [email protected]
www.staubli.com/electrical © by Stäubli Electrical Connectors AG, Switzerland – MA408 – 02.2023, Index e, Marketing Communications – 保留修改权利/Subject to alterations
配件 Accessories
(ill. 28)
保护帽：
16BL-CS/PC,订货号155881
16BL-CP/PC,订货号155882
未插合状态下，用于防止灰尘和水进入连接器
（防护等级IP65、IP68）。
绳索可以将保护帽系到连接器上。
(ill. 28)
Protective covers:
16BL-CS/PC, Order No� 15�5881
16BL-CP/PC, Order No� 15�5882
Are used to protect the connectors from dust and water when
unplugged, ingress protection IP65 and IP68�
The lanyard can be used to attach the cover to the insulation of
the connectors�
(ill. 29)
16BL-CP/FIX,订货号155884
16BL-CS/FIX,订货号155883
将16BL-CP和CS连接器系到电缆盘或其他固定点上。
(ill. 29)
16BL-CP/FIX, order No� 15�5884
16BL-CS/FIX, order No� 15�5883
To attach the 16BL-CP and -CS connectors on the cable reel or
other fixing points�