Steelcase IMPACT Bullet Desk Firmware update

Steelcase, Inc.
GrandRapids, MI 49501
U.S.A.
1-888-783-3522
Y9501952
Rev. E
Assembly Directions
Tools
Printed in the U.S.A.
1/8"
(3.1 mm)
IMPACT-Bullet Shaped Desk with End Panel
30” x 72” - RH
(used in this direction)
36” x 72” - LH

Page 2 of 4
Y9501952 Rev. E Steelcase
2.
1.
Install (2) L-brackets to end panel .
NOTE: Attach Z-brackets to worksurface
before attaching to back panel.
Attach back panel to end panel.
A Install (3) steel dowels into holes in
back panel.
B Insert (3) cam locks into openings in
end panel.
C Position the panels together and
secure with a half turn of cam locks.
END PANEL
BACK PANEL
L-bracket Z-bracket
(2) screws per bracket
.250-14 x 1.00” pan head
A
B
CAM LOCK (arrow will
always point toward dowel)
C

Page 3 of 4
Y9501952 Rev. E Steelcase
Lower assembled panels into place.
Secure all brackets with screws provided.
(2) Screws
per bracket
10-12 x 3/4”
Pan Head
4.
5.
TOP VIEW
FLUSH HERE
and
HERE
Using end panel assembly as reference,
locate the pilot holes on bottom of worksurface
that matches routed area on end panel.
Attach (2) Z-brackets to bottom of worksurface.
3.
(4) Screws
per bracket
10-12 x 3/4”
Pan Head

Page 4 of 4
Y9501952 Rev. E Steelcase
6.
7.
(12) screws
#10-9 X 1 3/4”
truss head
Install X-Flex Base into the routs
with the screws provided.
Carefully turn completed unit over
and adjust glides until unit is
completely level.