STEINEL PROFESSIONAL HF 3360 Owner's manual

DE STEINEL Vertrieb GmbH
Dieselstraße 80-84 · 33442 Herzebrock-Clarholz
Tel: [phone]
www.steinel.de
AT Steinel Austria GmbH
Hirschstettner Strasse 19/A/2/2 · AT-1220 Wien
Tel.: [phone] · [email protected]
CH PUAG AG
Oberebenestrasse 51 · CH-5620 Bremgarten
Tel.: [phone] · [email protected]
GB STEINEL U.K. LTD.
25, Manasty Road · Axis Park · Orton Southgate
GB-Peterborough Cambs PE2 6UP
Tel.: [phone] · [email protected]
IE Socket Tool Company Ltd
Unit 714 Northwest Business Park
Kilshane Drive Ballycoolin · Dublin 15
Tel.: [phone] · [email protected]
FR STEINEL FRANCE SAS
ACTICENTRE - CRT 2
Rue des Famards - Bât. M - Lot 3
FR-59818 Lesquin Cedex
Tél.: [phone] · [email protected]
NL Van Spijk B.V.
Postbus 2 · 5688 HP OIRSCHOT
De Scheper 402 · 5688 HP OIRSCHOT
Tel. [phone]
[email protected] · www.vanspijk.nl
BE VSA Belgium
Hagelberg 29 · BE-2440 Geel
Tel.: [phone]
[email protected] · www.vsabelgium.be
LU Minusines S.A.
8, rue de Hogenberg · LU-1022 Luxembourg
Tél. : [phone] · www.minusines.lu
ES SAET-94 S.L.
C/ Trepadella, n° 10 · Pol. Ind. Castellbisbal Sud
ES-08755 Castellbisbal (Barcelona)
Tel.: [phone] · [email protected]
IT STEINEL Italia S.r.l.
Largo Donegani 2 · IT-20121 Milano
Tel.: [phone]
[email protected] · www.steinel.it
PT F.Fonseca S.A.
Rua Joao Francisco do Casal 87/89 Esgueira
3800-266 Aveiro - Portugal
Tel. [phone]
[email protected] · www.ffonseca.com
SE KARL H STRÖM AB
Verktygsvägen 4 · SE-553 02 Jönköping
Tel.: [phone] · [email protected] · www.khs.se
DK Roliba A/S
Hvidkærvej 52 · DK-5250 Odense SV
Tel.: [phone] · www.roliba.dk
FI Oy Hedtec Ab
Lauttasaarentie 50 · FI-00200 Helsinki
Puh.: +358/207 638 000
[email protected] · www.hedtec.fi/valaistus
NO Vilan AS
Olaf Helsetsvei 8 · NO-0694 Oslo
Tel.: [phone]
[email protected] · www.vilan.no
GR PANOS Lingonis + Sons O. E.
Aristofanous 8 Str. · GR-10554 Athens
Tel.: [phone] · [email protected]
TR SAOS Teknoloji Elektrik Sanayi ve Ticaret Limited Şirketi
Halil Rıfat Paşa mahallesi Yüzerhavuz Sokak
PERPA Ticaret Merkezi A Blok Kat 5 No.313 · Şişli / İSTANBUL
Tel.: [phone]
[email protected] · www.saosteknoloji.com.tr
CZ NECO SK, A.S.
Ružová ul. 111 · SK-01901 Ilava
Tel.: [phone]
[email protected] · www.neco.sk
PL „LŁ“ Spółka z ograniczoną odpowiedzialnością sp.k.
Byków, ul. Wrocławska 43 · PL-55-095 Mirków
Tel.: [phone]
[email protected] · www.langelukaszuk.pl
HU DINOCOOP Kft
Radvány u. 24 · HU-1118 Budapest
Tel.: [phone] · [email protected]
LT KVARCAS
Neries krantine 32 · LT-48463, Kaunas
Tel.: [phone] · [email protected]
EE Fortronic AS
Tööstuse tee 10 · EE-61715 Tõrvandi
Ülenurme vald, Tartumaa
Tel.: [phone]
[email protected] · www.fortronic.ee
SI ELEKTRO – PROJEKT PLUS D.O.O.
Suha pri Predosljah 12 SI-4000 Kranj
PE GRENC 2 · 4220 Škofja Loka
Tel.: [phone] · GSM: 00386-40-856555
[email protected] · www.priporocam.si
SK NECO SK, A.S.
Ružová ul. 111 · SK-01901 Ilava
Tel.: [phone]
[email protected] · www.neco.sk
RO Steinel Distribution SRL
505400 Rasnov, jud. Brasov · Str. Campului, nr.1
FSR Hala Scularie Birourile 4-7
Tel.: [phone] · www.steinel.ro
HR Daljinsko upravljanje d.o.o.
Bedricha Smetane 10 · HR-10000 Zagreb
t/ 00385 1 388 66 77
[email protected] · www.daljinsko-upravljanje.hr
LV Ambergs SIA
Brīvības gatve 195-16 · LV-1039 Rīga
Tel.: [phone] · www.ambergs.lv
BG ТАШЕВ-ГАЛВИНГ ООД
Бул. Климент Охридски № 68
1756 София, България
Тел.: [phone]
[email protected] · www.tashev-galving.com
RU REAL.Electro
109029, Москва · ул. Средняя Калитниковская, д.26/27
Tel:[phone]
[email protected] · www.steinel-russland.ru
CN STEINEL China
Rm. 25A Huadu Mansion
No. 828-838 Zhangyang Road
200122 Shanghai, PR China
Tel: [phone] · Fax: [phone]
www.steinel.cn · [email protected]
01/2018 SENSOREN Version „M“
110061631 06/2018_M Technische Änderungen vorbehalten. / Subject to technical modification without notice.
GB
000000000 07/2013 Technische Änderungen vorbehalten.
RUS CN BG LV LT EST HR SLO RO PL SK CZ H TR GR N FIN DK S P E I NL FGB D
HF 3360
Information
STL-7384-17_BDAL-3000er_LiveLink.indd 2 15.03.17 10:57
DALI-2 Input device

2 3
...
GB � � � 10 Follow written instructions!
HF3360

4 5

6 7

8 9

10 11
GB
1� About this document
– Please read carefully and keep in a safe place.
– Under copyright.
Reproduction either in whole or in part only with our consent.
– Subject to change in the interest of technical progress.
Symbols
!
Hazard warning!
... Reference to other information in the document�
2� General safety precautions
Disconnect the power supply before attempting any work on the sensor�
• During installation, the electric power cable being connected must not be live.
Therefore, switch o the power first and use a voltage tester to make sure the
wiring is o-circuit.
• Installing the sensor involves work on the mains power supply. This work must
therefore be carried out professionally in accordance with national wiring regu-
lations and electrical operating conditions. (e.g. DE-VDE 0100, AT -ÖVE-EN 1,
CH-SEV 1000)
3� HF3360
Proper use
– Sensor suitable for indoor wall and ceiling-mounting
The HF 3360 is an active motion detector. It responds to the slightest movement
regardless of temperature. The integrated HF sensor emits high-frequency electro-
magnetic waves (5.8 GHz) and receives their echo. In response to the slightest move-
ment in the detection zone, the change in echo is perceived by the sensor and a
motion detection message is sent to the bus.
Detection is possible through doors, panes of glass or thin walls.
Package contents for surface-mounted installation (Fig�3�1)
Package contents for concealed installation (Fig�3�2)
!
Product components (Fig� 3�3)
A Connection module power supply lead, surface-mounted
B Connection module power supply lead, concealed
CDesigner trim, round or square
DSensor module
Product dimensions
Ceiling / wall mounting / surface-mounted and concealed wiring (Fig�3�4)
4� Electrical installation
For wiring up the motion detectors, the following applies: under section 6 of VDE
0100 520, a multiple-core lead containing both the mains voltage leads and the
control leads (e.g. NYM 5 x 1.5) may be used for the wiring between sensor and DALI
Application Controller. The lead between DALI Application Controller and sensor must
be no longer than 300 m (for 1.5mm²). After installing and switching ON, the sensor
starts to flash once a second.
Surface-mounted installation
If the rubber seal is damaged, the cable entry openings must be sealed with an M16
or M20 (at least IP54) double seal cable gland.
5� Mounting
• Check all components for damage.
• Do not use the product if it is damaged.
• Select an appropriate mounting location, taking the reach and motion detection
into consideration.
Installation procedure
Wall-mounting, concealed power supply lead (Fig�4�1)
Ceiling mounting, concealed power supply lead (Fig�4�2)
Wall-mounting, surface-mounted power supply lead (Fig�4�3)
Ceiling mounting, surface-mounted power supply lead (Fig�4�4)
For mounting on the wall, a water drainage hole (Ø 5mm drill bit) is marked next to
the rubber seal. This must be opened if necessary. (Fig�4�3)
An optional corner wall mount is available for mounting the HF3360.
(Prod. no. 035174 white).
GB

12 13
• Switch OFF power supply� (Fig�4�1)
• Detach designer trim from sensor module.
• Disconnect sensor module from the connection module.
• Make DALI connection.
– Surface-mounted power supply lead (Fig�4�5)
– Concealed power supply lead (Fig�4�6)
• Insert fastening screws and mount connection module.
• Fit sensor and connection module together and screw into place
• Switch ON power supply. (Fig�4�6)
• Fit designer trim.
• Detection zone / reach (Fig� 4�7)
6� Function / operation
Once you have connected the unit, closed the housing and fitted the lens, you are
ready to put the system into operation.
The sensor is put into operation in accordance with the applicable DALI 2 standard. All
functions and commands are available from DALI standard IEC 62386 Part 101, Part
103, Part 303 and Part 304. The motion detection values and light levels measured by
the sensor can be requested from the DALI Application Controller. Automatic or time-
based cyclical transmission can also be selected.
You will find detailed information in the interface description on the Internet at:
www.DALI-2.steinel.de
7� Maintenance / care
The product requires no maintenance.
The sensor is suitable for switching on a light automatically. The unit is not suitable
for burglar alarm systems as it is not tamperproof in the manner prescribed for such
systems. The surface can be cleaned with a damp cloth (without detergents) if dirty.
8� Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in
an environmentally compatible manner.
Do not dispose of electrical and electronic equipment
as domestic waste.
EU countries only:
Under the current European Directive on Waste Electrical and Electronic Equipment
and its implementation in national law, electrical and electronic equipment no longer
suitable for use must be collected separately and recycled in an environmentally
compatible manner.
9� EC Declaration of Conformity
STEINEL Vertrieb GmbH hereby declares that the HF3360 radio equipment type con-
forms to Directive 2014/53/EU. The full wording of the EU Declaration of Conformity is
available for downloading from the following Internet address: http://www.steinel.de
10� Manufacturer’s Warranty
As purchaser, you are entitled to your statutory rights against the vendor. If these
rights exist in your country, they are neither curtailed nor restricted by our Warranty
Declaration. We guarantee that your STEINEL Professional sensor product will remain
in perfect condition and proper working order for a period of 5years. We guarantee
that this product is free from material-, manufacturing- and design flaws. In addition,
we guarantee that all electronic components and cables function in the proper man-
ner and that all materials used and their surfaces are without defects.
Making Claims
If you wish to make a claim, please send your product complete and carriage paid
with the original receipt of purchase, which must show the date of purchase and
product designation, either to your retailer or contact us at STEINEL (UK) Limited,
25Manasty Road, Axis Park, Orton Southgate, Peterborough, PE2 6UP, for a re-
turns number. For this reason, we recommend that you keep your receipt of purchase
in a safe place until the warranty period expires. STEINEL shall assume no liability for
the costs or risks involved in returning a product.
For information on making claims under the terms of the warranty, please go to
www�steinel-professional�de/garantie
If you have a warranty claim or would like to ask any question regarding your product,
you are welcome to call us at any time on our Service Hotline [phone].
MANUFACTURER'S
1
3
5
YEAR
GB
WARRANTY
MANUFACTURER'S
YEAR
WARRANTY
MANUFACTURER'S
YEAR
WARRANTY
GB

14
11� Technical specifications
Dimensions
(L×W×H)
Surface-mounted installation, round Ø
Surface-mounted installation, square
Concealed installation, round Ø
Concealed installation, square
126×52mm
95×95×52mm
124×64mm
94×94×64mm
Power consumption 9 mA / 5 DALI users,
12-22.5 V , no SELV
DALI interface DALI control line (multi-master capability for communicati-
on with the DALI Application Controller/DALI sensor)
Angle of coverage 360° with 180° angle of aperture
Application inside buildings
Sensor system 5.8GHz high frequency
Transmitter power approx. 1mW
Brightness measurement 2-1000lux
IP rating Surface-mounted: IP54 Concealed: IP20
Temperature range -20°C to +50°C
Mounting height 2-2.8m
12� Troubleshooting
Malfunction Cause Remedy
No power at the
sensor
■Break in DALI wiring
■Short circuit
■Check DALI wiring with
voltage tester
■Check connections
Sensor sending
motion detection
signal when it
should not
■Animals moving in
detection zone
■Wind is moving paper or
plants in the detection zone
■Sensor near Wi-Fi or other
wireless communication
source
■Adjust zone or fit shrouds
■Change detection zone
■Install at least 2 m away
from the wireless
communication source