Steren RM-8 User manual

ENGLISH
ENGLISH-02
IMPORTANT
Before using your new Universal remote control, please read the
following recommendations.
Clean only with a soft, dry cloth.
You need to re-program your remote control after remove the old
batteries. After removing the batteries, the memory will be ereased
immediately, that’s why you need to keep the actual programmed
codes.
FEATURES
Universal Remote Control multifunction RCA.
You can control most brands of TV, VCR, VCD / DVD, LD / CD,
CATV, Satellite and AUX.
Manages up to 8 units at the same time, has 36 keys which include
the main functions as Mute (Mute), Menu and Timer.
Its design is very modern, this is super lightweight and durable
plastic manufactured in black.
•
•
•
•
•
•

ENGLISH
ENGLISH-03
CONTROLS
1.- Power
Turns the selected device on / off
2.- Devices Keys
Select the type of the devices that you want
to control (TV, DVD, etc)
3.- Indicating LED
4.- Numerical Keys
Provide the functions just like your original
remote, such as the direct access to
program/channel selection.
5.- Set
You can program the remote control
6.- Video Keys
DVD / VCR functions keys
7.- Channels (Ch)
These keys has the same functions as your original remote control.
8.- Volume (Vol)
Set the volume level.
1
2
3
4
5
6
7
8
9
10

ENGLISH
ENGLISH-04
9.- TV / AV
Switch the signal between TV and Video
10.- Mute
Disable TV sound
HOW TO USE THE QUICK PROGRAM METHOD
Before using your new Universal Remote Control be sure that you has
installed 3 new alkaline batteries type AAA or with enough charge.
You can use the quick program with the enlisted codes, that you
can see on the next pages. If your device does not respond or is
not functioning properly, please try with each code listed for your
brand. If it’s necessary, try the Search Method.
1.- Press and hold SET. Then press the corresponding key, to program
your desired device (TV, DVD, VCR, etc). The indicating LED turns on.
2.- Find the code for your device in the codes list and enter the 3 digits
code. The indicating light turns off.
3.- Now aims the remote control at your device, and press POWER. If
your device switch on, you are ready to operate the device. Ckeck that
your device works properly with the remote control. If your device does
not respond or is not functioning properly, please try with each code
listed for your brand, repeating from step 1 to 3. If is necessary, try the
Search Method.
This kit is ideal for electronic students or hobbyists because

ENGLISH
ENGLISH-05
Do not exceed more than 10 seconds between each step.
Otherwise, the remote control exit from the Program Mode and you
must start again.
Probably there are more than one code for your device, but only
one of them will control almost the total of functions, try to nd the
more appropriated code for your brand.
AUTOMATIC SEARCH METHOD
1.- Switch your device on (not in Stand By).
2.- Aim the remote control at your device during the automatic search
method.
3.- Press and hold SET button. Then press the corresponding key, to
program your desired device (TV, DVD, VCR, etc). The indicating LED
turns on.
4.- Release the keys. Press the SET button once again. The indicating
LED will be blinking and the search begins.
5.- Press POWER (1) constantly -256 times max *-, until your device
turns off. IF the equipment turns off, IMMEDIATELY release THE power
button.
6.- Press the button of the programmed device (TV, DVD, etc.). The
remote control store the code for your device and exit from Search
Mode.
This kit is ideal for electronic students or hobbyists because
it allows them to develop creativity in the programming of
this prototype of a mechanical system. This kit includes all

ENGLISH
ENGLISH-06
7.- Press Power once again to check that your device turns on. Test the
remote control functions, it must to control almost the total of functions,
otherwise repeat the instructions.
Be patient. If your device don’t turn off after few tries pressing
Power, repeat from step 2.
Do not press different buttons as we mentioned in this instruction
manual.
Do not exceed more than 30 seconds between each step.
Otherwise the remote control exit from the Search mode and you
must to repeat from step 2
HOW TO ERASE PROGRAMMED CODES
If you want to erase a specic code, you can use the quick program
method or the automatic search method; when you enter the new code,
automatically will erase the old code.
HOW TO FIND OUT WHICH CODE IS CURRENTLY
PROGRAMMED
Once you have set your remote control and control your device, you can
blink back your setup code for future reference, even if you used the
Automatic Search Method or the Quick Program Method.
In order to know a specic device code:
1.- Press the button of the programmed device (TV, DVD, etc.).
2.- To know the rst digit, press SET and then press number 1 key.
Count the red blinks on the indicating LED. If there are no blinks, the
digit is “0”.
This kit is ideal for electronic students or hobbyists because
it allows them to develop creativity in the programming of
this prototype of a mechanical system. This kit includes all

ENGLISH
ENGLISH-07
3.- For the second digit, press SET and then press number 2 key. Count
the red blinks.
4.- For the third digit, press SET and then press number 3 key. Count
the red blinks.
HOW TO SWITCH BETWEEN DEVICES
Just press the button of the desired device that you want to use (TV,
VCR, Sat, CD, VCD, DVD, Cable, Aux)
TROUBLESHOOTING
TROUBLE SOLUTION
Your brand is not listed in the code section Try the Automatic Search Method.
Try all the codes listed for your brand. Try the Automatic Search
Method.
Make sure that the correct key was pressed. For example. If you
want to control the TV set, make sure that the TV key was pressed.
You may be using the wrong code. Try the next code listed for your
brand. Start the automatic Search Method
Make sure you are using new batteries and they put on the right
position. Aim the remote control, directly to your device.
Make sure you are using new batteries and they put on the right
position.
The remote control do not operate your device
(s)
The remote control is not performing
commands properly
The remote control does not respond after
pressing a key
The indicating LED does not blink when you
press a key

ENGLISH
ENGLISH-08

ENGLISH
ENGLISH-09

ENGLISH
ENGLISH-10

ENGLISH
ENGLISH-11

ENGLISH
ENGLISH-12

ENGLISH
ENGLISH-13

ENGLISH
ENGLISH-14

ENGLISH
ENGLISH-15

ENGLISH
ENGLISH-16

ENGLISH
ENGLISH-17

ENGLISH
ENGLISH-18

ENGLISH
ENGLISH-19

ENGLISH
ENGLISH-20