Strong SRT 5437 User manual

1
High Denition Digital Receiver
SRT 5437
User Manual

2

3
Warranty Information
This product comes with a 12-month manufacturer’s warranty from
the date of purchase.
This unit has a 30 days replacement warranty for manufacturing
faults. Within this period please return the faulty product with all
its supplied accessories to either the place of purchase or STRONG
Australia accompanied by the original purchase receipt.
After this 30 day period the unit must be returned to STRONG
Australia for testing, and if deemed faulty, it will be repaired or
replaced at the discretion of STRONG Australia Pty Ltd. The faulty
product can either be sent to STRONG Australia directly or via your
place of purchase for evaluation.
STRONG Australia will cover any reasonable costs incurred in
returning the faulty product for evaluation should the product
be deemed as genuinely faulty. If the product is found to have no
fault, the costs incurred in delivering the unit to and from STRONG
Australia needs to be covered by the customer.
Our goods come with guarantees that cannot be excluded under
Australian Consumer Law. You are entitled to a replacement or
refund for major failure and for compensation for any reasonably
foreseeable loss or damage. You are also entitled to have goods
repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
STRONG Australia Pty Ltd
60 Wedgewood Rd, Hallam. VIC. 3803
Ph: [phone] FAX: [phone]

4
Table of Contents
1. Safety Instructions 5
Reference & Software Update 6
2. Product Overview
2.1 Front Panel 7
2.2 Rear Panel 7
2.3 Remote Control Functions 8
2.4 Activating the learning remote function 10
3. Installation
3.1 Connecting to a Television 11
3.2 First Time Installation 12
4. Basic Unit Operations
4.1 Program Management Settings 15
a) Program Edit
b) EPG - Electronic Program Guide
c) Sort Channels
d) Creating favourite channel list
4.2 Picture Settings 15
a) Screen Mode
b) Display Mode
c) TV Type 16
4.3 Colour Settings Menu 16
4.4 Channel Search 16
a) Auto Search
b) Manual Search
4.5 Restore factory default 16
4.6 USB 16
a) Accessing the USB
b) Multimedia
c) Recording - Instant Recording, Schedule Recording
d) Time Shift 17
e) Playback Recorded Files 18
f) Stop playback
g) Delete Recorded Files
5. Clock & Time Settings 18
6. Trouble Shooting 19
7. Unit Specications 21

5
1. Safety Instructions
Safety Precaution
This STB has been designed and manufactured to satisfy the
international safety standards, please read the following safety
precautions carefully before operating this receiver.
Main Supply:
Before operating, please check the units operating voltage is
100-240V AC 50/60Hz.
Overload:
Do not overload a wall outlet with extension cord or adapter, do not
use damaged power cords or touch it with wet hands as this may
result in electric shock.
Liquid:
The receiver should not be exposed to dripping or splashing water,
and that no objects lled with liquids, such as vases, should be
placed on or near the unit.
Ventilation:
Keep the slots on sides & top of the receiver uncovered to allow
sucient airow to the unit. Do not put the receiver on soft
furnishings or carpets. Do not expose the receiver to direct sunlight,
do not place it near a heater or in humid conditions. Do not stack
other electronic equipment on top of the receiver.
Cleaning:
Un-plug the receiver from the wall outlet before cleaning. Clean
the receiver with a soft cloth and a mild solution of washing-up
liquid (no solvents).

6
Connection:
Disconnect the receiver from the mains when you connect it to
Antenna or disconnect it from Antenna. Failure to do so, could
possibly cause damage to the Antenna.
Location:
Keep the receiver indoors in order to avoid lightening, rain or
direct sunlight.
Do not remove cover:
Do not remove the cover, to reduce the risk of electric shock.
Contact qualied and licensed service personnel to repair the
receiver, or contact your dealer.
Reference
Auto Search
Manual Search
PAL/NTSC Conversion
True full Color (32 bits) on screen display (OSD)
Menu language supported: English
Multi-language audio supported
Multi-language DVB Subtitle output
7 days Electronic Program Guide (EPG)
USB 2.0 Interface
Software update:
If new software becomes available for this model, it can be
downloaded from our website (www.strong.com.au) and then
placed onto a USB. Plug in the USB into the USB port on the unit
and then go to:
Menu > Expansion > USB > Software > Click on the le.

7
2. Product Overview
2.1 Front Panel
1. Power button: Switch between operation and standby modes.
2. Up & Down Channel: Change channel in viewing modes.
3. USB2.0: Single USB 2.0 Host Port.
4. Power / Signal light: Power / signal indicator.
5. Display: It displays channel information in normal mode and local
time in standby mode.
2.2 Rear Panel
1. ANT IN: Connect the antenna cable.
2. Loop Out: Antenna loop out
3. S/PDIF: COAXIAL: Digital Audio output (Optical).
4. IR Extender Plug: IR Cable (optional).
5. HDMI: Connect to the TV using an HDMI cable (supplied).
6. A/V- AUDIO R/L / VIDEO: Connect to the TV using RCA Jack cable
(not supplied).
7. DC-12V: Connect to the power using power adapter.
*Note: For best results, use HDMI cable and RG6 Quad Shielded antenna cabling
3 4 5
1 2 3 4 5 6 7
1 2

8
2.3 Remote Control Functions
2
4
3
87
1
5
6
9
9
10
11
12 13
25
14
28
17
18 19
20
20
21
22
22
23 24
27
26
30
29
31
15 16

9
1. POWER: Turns the receiver On
2- 6. TV Control buttons (refer page
10)
7. TV/RADIO: Toggles between TV or
RADIO mode
8. USB: Access USB Menu &
Recorded Files
9. USB: Previous and Next
10. USB: Fast rewind
11. USB: Stop
12. USB: Fast forward
13. USB: Play/Pause
14. AUDIO: Speaker Selection
15. SUB: Subtitles On/O
16. Timer
17. Set Screen resolution
18. Menu
19. Exit
20. Alter channel or change
selection in Menu Page
21. OK / Enter
22. Alter volume or change
selection in Menu Page
23. INFO: Shows the current channel
information
24. EPG: Shows the EPG (Electronic
Program Guide) in TV mode
25. MUTE: Mutes audio output of the
set top box
26. V+/V- : Increases/decreases the
volume level
27. CH+/CH- : Channel up/down in
channel list mode
28. Records the TV program to the
connected storage device
29. 0~9: Channel selection or value
input
30. FAV: Displays Favourite Channel
List
31. RECALL: To select from the list of
previously viewed channels

10
2.4 Activate the learning remote function
1. Press and hold SET button
(1) in TV CONTROL area for
3 seconds. The red LED light
on the TV CONTROL POWER
button will glow brighter,
conrming remote is in
learning mode.
2. Then press any one of the
learning buttons, within 10
seconds, on this remote (2)
(AV/TV, Vol+ VOl- or Power),
the LED light will icker,
conrming readiness to accept
codes from the TV remote.
3. Aim the TV remote (top end)
against this remote, as close as
possible, and press and hold
the corresponding button on
the TV remote. (AV/TV, Vol+,
Vol- or Power).
4. If copy is successful, the LED
light on TV control POWER
Button will ash three times
before staying lit.
5. Repeat 2,3 and 4 for every
other key you wish to copy,
(AV/TV, Vol+, Vol- or Power).
6. Once copying is complete,
press the SET key again, to exit
the learning mode. The LED
light will go out.
2
1