Subaru E3610FS980 User manual

PRESS
PRESS
2 Carriage Bolts
2 SnapArounds
2 Hex Keys
BIKE HARDWARE KIT
OWNERS MANUAL
E3610FS980
CONTENTS
FOR USE WITH SUBARU BICYCLE
ATTACHMENT. USE IN PLACE OF BICYCLE
ATTACHMENT INSTRUCTIONS PAGES 3 & 4.

1031691 Rev B
PRESS
PRESS
Hoop & Tray Assembly – Attach to Cross Bars (SKIP page 3 & 4 of Instructions)
FRONT REAR
NOTE: Make sure the buckles are facing the same direction
as the Cam Levers for the left and right wheel trays.
NOTE: Hoops must rest horizontally on Trays while turning the
Hex Keys. When hoop is raised the Hex Keys cannot be turned.
To turn the Hex Keys, rest Hoops horizontally
on Wheel Tray.
Tighten all Hex Keys.
CONTINUE ON PAGE 5 OF BICYCLE ATTACHMENT INSTRUCTIONS
Discard the
short crossbar
from page 3
PRESS
Carriage Bolt
REAR
2 Hex Keys
4 Carriage Bolts
4 Locking Hex Keys
2 Washers and
Wing Nut
REAR
FRONT
Short
Buttonhead
Screw
NOTE: If the
OverCenter
WheelStraps need
to be between the
factory racks, slide
them onto the
WheelTray now
(see step 5 and
warnings at top of
page 2). Otherwise,
do this at the end of
this page.