Subaru EyeSight User manual

Foreword
Congratulations on choosing a SUBARU vehicle equipped with EyeSightTM.
EyeSight incorporates the latest driver assistance features available from
SUBARU, including such features as Adaptive Cruise Control, a Lead Vehicle Start
Alert and a Lane Departure and Lane Sway Warning, all of which are designed to
assist the driver in making decisions and increase driver comfort and
convenience. Initially, the operation and use of the various EyeSight features may
be unfamiliar to you. That is why we urge you to read this manual carefully before
using EyeSight. We also recommend that you first take the time to test EyeSight in
order to experience its features for yourself so that you can become familiar with
their operation.
Please keep in mind that it is the responsibility of drivers to operate their vehicles
safely at all times. Drivers should always remain alert and should never become
complacent while operating their vehicles because of the presence of EyeSight.
EyeSight is never a substitute for active driver involvement and it may not operate
optimally under all driving conditions.
This booklet is a supplement to the Owner’s Manual for your SUBARU vehicle and
contains a detailed description of EyeSight. It should be read in conjunction with
your Owner’s Manual so that you will gain a thorough understanding of the proper
operation of your vehicle.
The information, specifications and illustrations found in this booklet are those in
effect at the time of printing. SUBARU CORPORATION reserves the right to
change specifications and designs at any time without prior notice and without
incurring any obligation to make the same or similar changes on vehicles
previously sold.
Please keep this booklet together with your Owner’s Manual and leave it in the
vehicle at the time of resale. The next owner will need the information it contains.
SUBARU CORPORATION, TOKYO, JAPAN
“SUBARU” and the six-star cluster design are registered trademarks of SUBARU CORPORATION.
© Copyright 2019 SUBARU CORPORATION
B2572BE-A.book 1 ページ ２０１９年５月１４日 火曜日 午後５時３４分

B2572BE-A.book 2 ページ ２０１９年５月１４日 火曜日 午後５時３４分

EyeSight
About EyeSight .................................................................. 4
Pre-Collision Braking System........................................... 27
Advanced Adaptive Cruise Control .................................. 43
Lane Departure Prevention Function ............................... 84
Pre-Collision Throttle Management.................................. 93
Lane Departure Warning................................................ 100
Lane Sway Warning ....................................................... 103
Lead Vehicle Start Alert ................................................. 106
EyeSight Assist Monitor ................................................. 107
Conventional Cruise Control .......................................... 109
List of alert/notification sounds....................................... 120
EyeSight malfunction and temporary stop ..................... 122
Changing settings .......................................................... 126
Message screen list ....................................................... 132
Troubleshooting ............................................................. 137
B2572BE-A.book 3 ページ ２０１９年５月１４日 火曜日 午後５時３４分

4
About EyeSight
EyeSight is a driving support system that uses a range of functions to assist the driver in
making decisions in order to provide for more safe and comfortable driving and to reduce
driver fatigue. Making use of images created by the stereo camera specially designed by
SUBARU, EyeSight detects the vehicle in front, obstacles, traffic lanes and other items.
EyeSight
WARNING
Drivers are responsible for driving safely. Always comply with all traf-
fic rules and regulations regardless of the fact that your vehicle is
equipped with EyeSight. Always maintain a safe following distance
between your vehicle and the vehicle in front of you, pay attention to
your surroundings and driving conditions, and take necessary actions
in order to maintain a safe following distance.
Never attempt to drive relying on EyeSight alone.
EyeSight is intended to assist the driver in making decisions in order
to reduce the risk of accidents or damage and lessen the burden on
the driver.
When an EyeSight warning is activated, pay attention to what is in
front of you and to your surroundings, and take necessary actions.
This system is not designed to support driving in poor visibility or in
extreme weather conditions, or to protect against careless driving
when the driver is not paying complete attention to the road ahead. It
also cannot prevent collisions from occurring in all driving conditions.
There are limits to the EyeSight recognition performance and control
performance. Be sure to read the instructions for each function before
using the system, and always use it properly. Improper use may lead
to failure of control performance, which could cause an accident.
Refer to the following pages for each function:
•For the Pre-Collision Braking System, refer to page 27.
•For Adaptive Cruise Control, refer to page 43.
•For Lane Centering Function, refer to page 71.
•For Lane Departure Prevention Function, refer to page 84.
•For Pre-Collision Throttle Management, refer to page 93.
•For Lane Departure Warning, refer to page 100.
•For Lane Sway Warning, refer to page 103.
•For Lead Vehicle Start Alert, refer to page 106.
•For Conventional Cruise Control, refer to page 109.
B2572BE-A.book 4 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
5
Continued on next page 
In LHD vehicles, EyeSight is configured for driving on the right-hand
side of the road. However, it can be reconfigured by changing the Driv-
ing Lane Customize setting for driving on the left-hand side.*
Page 126
If the setting for the traffic lane (driving side of the road) does not
match the traffic lane, full EyeSight performance may not be available.
*: Characteristics and settings that are affected by specific differences
between RHD and LHD vehicles cannot be changed.
•The system may not operate correctly under the conditions listed below.
When these conditions occur, turn off the Pre-Collision Braking System. Also,
do not use Adaptive Cruise Control, Lane Centering Function, Lane Depar-
ture Prevention Function or Conventional Cruise Control.
- The tire pressure is not correct.*1
- The temporary spare tire is installed.*1
- Tires that are unevenly worn or tires with uneven wear patterns are
installed.*1
- Tires that are the wrong size are installed.*1
- A flat tire has been fixed temporarily with a tire repair kit.
- The suspension has been modified (including a genuine SUBARU suspen-
sion that has been modified).
- An object that obstructs the stereo camera’s view is installed on the vehicle.
- The headlights are dirty or they have snow and ice or dirt on them. (Objects
are not correctly illuminated and are difficult to detect.)
- The optical axes are not aligned correctly. (Objects are not correctly illumi-
nated and are difficult to detect.)
- The lights including headlights and fog lights have been modified.
- Vehicle operation has become unstable due to an accident or malfunction.
- The brake system warning light is illuminated in red.*2
- A heavy cargo is loaded onto or inside the vehicle.
- The maximum number of occupants is exceeded.
- The combination meter is not operating properly; such as when the lights do
not illuminate, the beeps do not sound, the display is different from when it
is normal, etc.*3
B2572BE-A.book 5 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
6
Continued from previous page
•The system will not operate correctly in the following conditions. Do not use
Adaptive Cruise Control, Lane Centering Function, Lane Departure Preven-
tion Function or Conventional Cruise Control.
- The wheels are out of balance (e.g., the balance weight is removed or mis-
aligned).*1
- The wheels are out of alignment.*1
- A trailer or another vehicle, etc. is being towed.
•The system may not operate properly under the following conditions. Do not
use Lane Centering Function.
- There is an abnormal vibration in the steering wheel or the steering wheel is
heavier than usual.
- The steering wheel has been replaced with parts other than genuine
SUBARU parts.
*1: The wheels and tires have functions that are critically important. Be sure to
use the correct ones. For details, refer to the Owner’s Manual for your vehi-
cle.
*2: If the brake system warning light does not turn off, immediately pull the vehi-
cle over in a safe place and contact a SUBARU dealer to have the system
inspected. For details, refer to the Owner’s Manual for your vehicle.
*3: For details about the combination meter, refer to the Owner’s Manual for
your vehicle.
B2572BE-A.book 6 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
7
Continued on next page 
CAUTION
•The characteristics of the stereo camera are similar to those of human eyes.
For this reason, conditions that make it difficult for the driver to see in the for-
ward direction have the same effect on the stereo camera. They also make it
difficult for the system to detect vehicles, obstacles, and traffic lanes.
•Detection by the EyeSight system is limited to objects that are within the
range of the stereo camera’s field of view. Also, after an object enters the
range of the camera’s field of view, it may take some time for the system to
detect it as a controllable target and to warn the driver.
•Under the conditions listed below, it will become more difficult for the system
to detect the vehicle in front, motorcycles, bicycles, pedestrians and obstacles
on the road, and lane markers. Also, EyeSight may temporarily stop operat-
ing. However, the temporary stop will be canceled once these conditions have
improved and the vehicle is driven for a short period of time.
- Bad weather (for example heavy rain, a blizzard or thick fog). In particular,
the system is more likely to temporarily stop operating when there is an oil
film adhering to the windshield, a glass coating has been applied, or poorly
performing wipers are used.
- Strong light is coming from the front (sunlight or headlight beams of oncom-
ing traffic, etc.).
- The windshield washer is in use.
- Raindrops, water drops, or dirt on the windshield are not wiped off suffi-
ciently.
- The windshield has become fogged, scratched, or snow, dirt, dust or frost
has adhered to it, or it is otherwise affected. These will reduce the stereo
camera’s field of view.
- The vehicle is tilted at an extreme angle due to loaded cargo or other fac-
tors.
S01970
Low objects surrounding the vehicle
cannot be detected.
B2572BE-A.book 7 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
8
Continued from previous page
- Visibility is poor due to sand, smoke or water vapor blowing in the wind, or
the front vision is obscured due to water splashes, snow, dirt or dust stir up
generated by the vehicle in front or oncoming traffic.
- The stereo camera’s field of view is obstructed (for example by a canoe on
the roof of the vehicle).
- Through the entrance or exit of a tunnel
- The rear aspect of the vehicle in front is low, small or irregular (for example
a low bed trailer, etc.).
- The obstacle is a fence, a wall or a shutter, etc. with a uniform pattern (a
striped pattern, brick, etc.) or with no pattern in front.
- The obstacle is a wall or door made of glass or a mirror in front.
- Driving at night or in a tunnel when there is a vehicle in front that does not
have its taillights on
- Driving through a banner or flag, low branches on a tree or thick/tall vegeta-
tion
- On steep uphill or downhill grades
- The stereo camera is obstructed by a hand, etc. (If even one of the lenses is
obstructed, the system does not operate properly.)
- It is completely dark and no objects are detected.
- The area around the vehicle has a uniform color (such as when completely
covered in snow, etc.).
- Accurate detection is not possible due to reflections in the windshield.
•Under the conditions listed below, EyeSight may temporarily stop operating. If
this occurs, EyeSight will resume operating when the conditions improve.
- The temperature inside the vehicle is high, such as after the vehicle was left
in bright sunshine, or the temperature inside the vehicle is low, such as after
the vehicle was left in an extremely cold environment.
- Immediately after the engine starts
•Under the conditions listed below, it is difficult to recognize vehicles in front,
motorcycles, pedestrians, obstacles on the road, traffic lanes, etc. Also, the
EyeSight system may temporarily stop operating. If the EyeSight system
repeatedly stops operating several times, contact a SUBARU dealer and have
the system inspected.
- The stereo camera lenses are smeared such as from fingerprints.
- The stereo camera has become misaligned due to a strong impact.
B2572BE-A.book 8 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
9
•When there is a malfunction in the EyeSight system, turn off the Pre-Collision
Braking System (page 41) and the Lane Departure Warning
(page 102), and stop using the Adaptive Cruise Control, Lane Centering
Function, Lane Departure Prevention Function and Conventional Cruise Con-
trol. Contact a SUBARU dealer and have the system inspected.
•When the Vehicle Dynamics Control warning light is illuminated, the Pre-Colli-
sion Braking System may not operate properly. If the indicator light is illumi-
nated, turn off the Pre-Collision Braking System. Also, do not use the
Adaptive Cruise Control or Conventional Cruise Control.
NOTE
EyeSight records and stores the following data when the Pre-Collision Braking
System is operated. It does not record conversations or other audio data.
•Stereo camera image data
•Distance from the vehicle in front
•Vehicle speed
•Steering wheel turning angle
•Lateral movement with regards to the direction of travel
•Accelerator pedal operation status
•Brake pedal operation status
•Select lever position
•Odometer reading
•Data related to ABS, Vehicle Dynamics Control and Traction Control Function
SUBARU and third parties contracted by SUBARU may acquire and use the
recorded data for the purpose of vehicle research and development.
SUBARU and third parties contracted by SUBARU will not disclose or provide
the acquired data to any other third party except under the following condi-
tions.
- The vehicle owner has given his/her consent.
- The disclosure/provision is based on a court order or other legally enforce-
able request.
- Data that has been modified so that the user and vehicle cannot be identi-
fied is provided to a research institution for statistical processing or similar
purposes.
B2572BE-A.book 9 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
10
The stereo camera is located on the front map
lights unit.
Handling of the Stereo Camera
CAUTION
•The stereo camera monitors and detects smears or blurs on the front of the
camera. However, detection is not 100% accurate.
Under certain conditions, the function may fail to detect smears or blurs on
the front of the stereo camera accurately. In addition, this function may not
detect that there is snow or ice on the windshield close to the stereo camera.
In such conditions, be sure to keep the windshield clean at all times (indicated
by ). Otherwise the system may not operate correctly. When this func-
tion detects that the front of the stereo camera is smeared or blurred, no
EyeSight functions can be activated except for Conventional Cruise Control.
•The stereo camera lenses are precision components. Always observe the fol-
lowing precautions especially when handling them.
- Never touch the stereo camera lenses, and do not attempt to wipe or clean
the lenses. Doing so could damage or soil the lens, and lead to improper
system performance.
If you ever touch a lens for any reason, be sure to contact a SUBARU
dealer.
A
S01107
Stereo camera
B2572BE-A.book 10 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
11
Continued on next page 
- When cleaning the wind-
shield, cover the front of the
camera casing with paper
that does not collect dust,
such as copy paper. Affix the
paper to prevent glass
cleaner from getting on the
camera lenses. At this point,
make sure that the tape’s
adhesive surface does not
come in contact with the
windshield or the lens. Be
sure to remove the paper
after cleaning.
- When having the inside of windshield cleaned at a service station, etc., be
sure to request that the attendant covers the camera covers before washing
the vehicle.
- Do not subject the stereo camera to a strong impact.
- Do not remove or disassemble the stereo camera.
- Do not change the positions where the stereo camera is installed or modify
any of the surrounding structures.
•Do not install an interior rearview mirror other than a genuine SUBARU rear-
view mirror (such as a wide-type mirror) and the sun visor. Also, use the rear-
view mirror so that it does not obstruct the stereo camera. Failure to do so
may affect the stereo camera’s field of view and could prevent the EyeSight
system from functioning properly.
S03066
S00509
B2572BE-A.book 11 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
12
Continued from previous page
•Do not install any accessories other than the ones designated by SUBARU on
the prohibited areas shown in the illustrations (gray zones).
Even if some accessories are installed on the outside of the prohibited areas,
abnormal operation of EyeSight may occur due to the reflection of the light or
any objects. In this situation, move the accessories. For details, contact a
SUBARU dealer.
Side view Front view
•Do not place any objects on top of the instrument panel. The stereo camera
may not be able to detect objects accurately and the EyeSight system may
not function properly due to reflections in the windshield. For details, contact a
SUBARU dealer.
•If the top of the instrument panel is polished with chemicals or other sub-
stances, the stereo camera may not be able to detect objects accurately and
the EyeSight system may not operate properly due to reflections in the wind-
shield.
•Do not install any wiper blades other than genuine SUBARU wiper blades.
Doing so may affect the stereo camera’s field of view and could prevent the
EyeSight system from functioning properly.
•Replace damaged wiper blades or worn wiper blade rubbers as soon as pos-
sible. Using damaged wiper blades or worn wiper blade rubbers may cause
streaking on the windshield. The stereo camera may not be able to detect
objects accurately and the EyeSight system may not function properly due to
streaks or droplets remaining on the windshield.
S02664
Monitors or other accessories
B2572BE-A.book 12 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
13
•Do not install any accessories
on the front side such as on the
hood or the grille. It may affect
the camera view and the sys-
tem may not operate correctly.
•Make sure that the cargo
loaded on the roof does not
interfere in the stereo camera’s
field of view. Obstructing the
stereo camera’s view may
impair the system operation.
For details, contact a SUBARU
dealer.
•Keep the windshield (outside and inside) clean at all times. When the wind-
shield has become fogged, or it has a dirt or an oil film on it, the stereo cam-
era may not detect objects accurately and the EyeSight system may not
operate correctly. Never mount any device to the center air vent, as any air-
flow change may impact performance of the EyeSight system.
•Do not place any stickers or accessories on the windshield (outside or inside).
If you have to do so (for example, legally required or electronic toll tag), avoid
the area directly in front of the camera. Otherwise, it may adversely affect the
field of view of the stereo camera and can cause improper operation of the
system. For details, contact a SUBARU dealer.
•Do not use any glass coating agents or similar substances on the windshield.
Doing so may interfere with the proper operation of the system.
•Do not install any film or an additional layer of glass on the windshield. The
system may not operate correctly.
•If there are scratches or cracks on the windshield, contact a SUBARU dealer.
•To have the windshield replaced or repaired, contact a SUBARU dealer. Do
not install a windshield other than a genuine SUBARU windshield. The stereo
camera may not be able to detect objects accurately and the EyeSight system
may not operate properly.
S01098
B2572BE-A.book 13 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
14
EyeSight includes the following functions.
■Pre-Collision Braking System
This function uses a following distance warning feature to warn the driver to take evasive
action when there is the possibility of a collision with a vehicle or obstacle in front of you. If
the driver does not take evasive action, the brakes are applied automatically to help reduce
vehicle collision damage or, if possible, help prevent a collision.
Page 27
■Advanced Adaptive Cruise Control
Adaptive Cruise Control
This function maintains the set vehicle speed and when there is a vehicle in front in the
same traffic lane, it follows the speed of the vehicle in front up to the maximum of the set
vehicle speed.
Page 43
Lane Centering Function
This function helps suppress lane drifting by detecting lane markings (e.g., white lines) and
the lead vehicle on expressways, freeways and interstate highways, and by assisting steer-
ing operation. Lane Centering Function will work only when the Adaptive Cruise Control is
activated.
Page 71
■Lane Departure Prevention Function
When driving on expressways, freeways, or interstate highways, the system recognizes the
lane markings on both sides of the vehicle. If the vehicle appears likely to depart from the
lane, the system assists with steering operation in the direction that prevents the lane
departure, preventing the vehicle from leaving the lane.
Page 84
■Pre-Collision Throttle Management
This function reduces accidental forward movement caused by the select lever being placed
in the wrong position or the accelerator pedal being accidentally depressed, or depressed
too strongly.
Page 93
EyeSight Functions
B2572BE-A.book 14 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
15
■Lane Departure Warning
This function warns the driver when the vehicle is about to drift off the road.
Page 100
■Lane Sway Warning
This function warns the driver when it detects vehicle drifting caused by driver fatigue, fail-
ure to concentrate on the road, inattention, strong crosswinds or other factors.
Page 103
■Lead Vehicle Start Alert
This function notifies the driver when the vehicle stopped in front starts moving but the
driver’s vehicle remains stationary.
Page 106
■Conventional Cruise Control
In this mode, the system maintains a constant vehicle speed. It does not follow the vehicle
in front. This function can be used even when the stereo camera has temporarily stopped
operating (page 124). This function is used by switching from Adaptive Cruise Control to
Conventional Cruise Control.
Page 109
NOTE
EyeSight does not operate when the engine is not running (unless the engine is
automatically stopped by the Auto Start Stop system).
B2572BE-A.book 15 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
16
Instrument panel display layout
(1) Pre-Collision Braking System OFF
indicator light
(2) Combination meter display
(3) Vehicle Dynamics Control warning light
(4) Auto Vehicle Hold ON indicator light
(5) Auto Vehicle Hold operation indicator light
(6) Lane Departure Warning OFF indicator
light
(7) Electronic parking brake indicator light
(8) Brake system warning light
S03537
(1) (2) (3)(4)(5)
(8)(7)(6)
B2572BE-A.book 16 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
17
(1) Lead vehicle indicator
(2) Following distance setting indicator
(3) EyeSight display area
(4) Adaptive Cruise Control indicator
(5) Conventional Cruise Control indicator
(6) READY indicator
(7) Auto Start Stop OFF indicator
(8) Auto Start Stop indicator (green)/Auto
Start Stop warning indicator (yellow)
(9) Auto Start Stop No Activity Detected
indicator light (white)
(10) Select lever/gear position indicator
(11) X-MODE indicator
(12) Set vehicle speed display
(13) HOLD indicator
(14) Current vehicle speed
(15) Lane indicator
(16) EyeSight temporary stop indicator (white)
(17) EyeSight warning indicator (yellow)
(18) Your vehicle indicator
(19) Lane Centering indicator (white) (For US
models)
(20) Lane Centering indicator (green) (For US
models)
(21) Lane Centering indicator (white) (For
Canada models)
(22) Lane Centering indicator (green) (For
Canada models)
(23) Warning screen area
MPG
S03558
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(11)
(16) (17)
(21) (22)
(19) (20)
(12)
(13)
(14)
(15)
(18)
(23)
(10)
(9)(8)
Display units can be changed in the Screen Settings. For details, refer to the Owner’s Manual for your vehicle.
B2572BE-A.book 17 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
18
Adaptive Cruise Control indicator
•This indicator illuminates when the (CRUISE) switch is pressed.
Page 51
•When Adaptive Cruise Control is activated, this indicator (white) turns
green. When the driver accelerates the vehicle by depressing the
acceleration pedal while Adaptive Cruise Control is operating, the indi-
cator turns white.
Page 52
Conventional Cruise Control indicator
•This indicator illuminates when the / (Following distance set-
ting) switch is pressed and held after pressing the (CRUISE)
switch.
Page 111
•This indicator changes from white to green when Conventional Cruise
Control is activated.
Page 112
READY indicator
illuminates when cruise control* can be activated.
Pages 51 and 111
*: Adaptive Cruise Control and Conventional Cruise Control
HOLD indicator
illuminates when the stay-stopped function is operated while Adap-
tive Cruise Control is on.
Page 60
Lead vehicle indicator
When Adaptive Cruise Control is activated or when the stay-stopped
function is engaged, this indicator illuminates when a vehicle in front has
been detected.
Page 53
Following distance setting indicator
Indicates the following distance setting that was set with the /
(Following distance setting) switch.
Page 59
Set vehicle speed display
•Displays the set vehicle speed.
•This indicator changes from white to green when Adaptive Cruise Con-
trol or Conventional Cruise Control is activated.
Pages 52 and 112
B2572BE-A.book 18 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
19
Select lever/gear position indicator
This indicator illuminates and shows which position the select lever or the
gear is in.
EyeSight warning indicator (yellow)
•This indicator illuminates or flashes when a malfunction occurs in the
EyeSight system.
•When it is illuminated or flashing, none of the EyeSight functions can
be used (including Adaptive Cruise Control and the Pre-Collision Brak-
ing System, etc.).
Page 122
EyeSight temporary stop indicator (white)
•This indicator illuminates when the EyeSight system is temporarily
stopped.
•When the ignition switch is placed in the ON position, it will illuminate if
the (CRUISE) switch or (Lane Centering) switch is set to
ON within approximately 7 seconds of the engine starting. It turns off
when approximately 7 seconds have elapsed since the engine started.
•When it is illuminated, none of the EyeSight functions can be used
except for Conventional Cruise Control.
Page 124
Auto Start Stop indicator (green) (also used as Auto Start Stop
warning indicator (yellow))
•This indicator illuminates in yellow when the ignition switch is turned to
the ON position, and then it turns off after the engine starts.
•It illuminates in green while the Auto Start Stop system operates. It
turns off after the engine restarts.
•It illuminates in yellow if a malfunction occurs in the Auto Start Stop
system.
Auto Start Stop OFF indicator
This indicator illuminates when the Auto Start Stop system is turned off. It
turns off when the Auto Start Stop system is turned on.
Refer to the vehicle Owner’s Manual for details.
Auto Start Stop No Activity Detected indicator light
When a vehicle is stopped, the indicator light illuminates when the oper-
ating conditions of the Auto Start Stop system are not met.
The light will turn off when the vehicle starts driving.
X-MODE indicator (if equipped)
The X-MODE indicator illuminates when the X-MODE is on.
Refer to the vehicle Owner’s Manual for details.
B2572BE-A.book 19 ページ ２０１９年５月１４日 火曜日 午後５時３４分

About EyeSight
20
Lane Departure Warning OFF indicator light
•This indicator light illuminates when the Lane Departure Warning and
Lane Sway Warning are off.
•It also illuminates when the ignition switch is turned to the ON position.
Approximately 7 seconds after the engine starts, the Lane Departure
Warning OFF indicator light will turn off or remain illuminated depend-
ing on the current status (ON or OFF).
Pages 102 and 105
Pre-Collision Braking System OFF indicator light
•This indicator light illuminates when the Pre-Collision Braking System
and Pre-Collision Throttle Management are off.
•It also illuminates when the ignition switch is turned to the ON position,
and then turns off approximately 7 seconds after the engine starts.
Pages 42 and 99
Lane indicator
•This indicator illuminates in gray when the Lane Departure Prevention
Function is turned on.
•It illuminates in white under the following conditions.
- The Lane Departure Prevention Function goes into the standby sta-
tus.
- Lane Centering Function is operating by detecting the lane mark-
ings.
•It illuminates in yellow when the Lane Departure Prevention Function is
operating.
Pages 80 and 89
Brake system warning light
If the brake system warning light illuminates when the electronic parking
brake is released while driving, turn the Pre-Collision Braking System off.
At this time, do not use the Conventional Cruise Control mode or Adap-
tive Cruise Control mode.
If the brake system warning light does not turn off, immediately pull the
vehicle over to a safe location. Contact a SUBARU dealer to have the
system inspected.
Refer to the vehicle Owner’s Manual for details.
Electronic parking brake indicator light
This indicator light illuminates when the electronic parking brake is
applied.
Refer to the vehicle Owner’s Manual for details.
Your vehicle indicator
When the brake pedal is depressed or the brake control function is acti-
vated, the brake indicator light illuminates in red.
/
B2572BE-A.book 20 ページ ２０１９年５月１４日 火曜日 午後５時３４分