Sumake HR-0181 User manual

HR-0181 AIR PU HOSE BALANCER (5X8MMX12M)
PARTS LIST
No. Parts No. Description Q'ty No. Parts No. Description Q'ty
1 HR0181-01 Outer Shell (A) 1 23 HR0181-23 Stopper (1/8") 1
2 HR0181-02 Outer Shell (B) 1 24 HR0181-24 Screw Nut 1
3 HR0181-03 Wheel Disc Cover 1 25 HR0181-25 Air Coupling (1/4") 1
4 HR0181-04 Wheel Disc Seat 1 26 HR0181-26 Spring (5x8) 1
5 HR0181-05 Fastening Piece 2 27A HR0181-27A Nut 1
6 HR0181-06 Gear 1 28 HR0181-28 Adaptor 1
7 HR0181-07 Gear Check 1 34 HR0181-34 Square Clamp 1
8 HR0181-08 Fixing Rubber Ball 2 35 HR0181-35 Fixing Pin 2
9 HR0181-09 Air Inlet Bushing 1 36 HR0181-36 Rivet 2
11 HR0181-11 Spring 1 37 HR0181-37 Elbow 1
12 HR0181-12 Spring Plate 1 38 HR0181-38 Screws 1
14 HR0181-14 Nut (M4) 10 39 HR0181-39 O-Ring 1
15 HR0181-15 Shaft Spindle 1 40 HR0181-40 O-Ring 1
16 HR0181-16 E-Ring 1 41 HR0181-41 1/4" PT + 5/6" Swivel Fitting 2
17 HR0181-17 PU Hose 1 42 HR0181-42 Brass Fitting 1
18 HR0181-18 Screw 3 44 HR0181-44 Screw 2
19 HR0181-19 Screw 2 45 HR0181-45 O-Ring 4
20A HR0181-20A Washer 2 46 HR0181-46 Assembly Frame 1
21 HR0181-21 Washer 1 47 HR0181-47 PU Hose (8x12) 1
22 HR0181-22 Screw 10 HR-0181-P-1605C-HB

HR-0181, HR-0183, HR-0185
AIR PU HOSE BALANCER
FEATURES:
Material : PP
Easily installing on the wall or the ceiling.
Installed reel can rotate within 190°.
SPECIFICATION:
Polyurethane braid air hose.
Working pressure : 200 PSI (13.7 Bar)
INSTALLATION:
1. Mount the retractable reel to a bench or wall with 2 bolts and nuts.
2. When needed attach the lead hose to the air inlet.
3. Connect the desired quick connector or tool to the outlet fitting. If male thread for outlet, make sure to seal the threads with PTFE tape or o-ring.
OPERATION:
1. To extend hose, pull hose to desired length. The hose reel must be making an audible "click" when released to maintain its length. It may be
necessary to pull hose beyond desired length to keep it from automatically retracting.
2. To retract, pull hose until clicking stops. Hose will then automatically retract.
WARNING
1. Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
2. Disconnect power and release all pressure from the system before attempting to install, service, relocate or perform any maintenance.
3. Incorrect use like connecting with the heavy fitting or tool while pulling out whole hose may cause hose damage and not retracted.
4. Suggest to use 70~80% of whole length as the working hose length.
DANGER
1. Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
2. This product is specifically designed for compressed air service only. Use with any other material (liquid or gas) is a misapplication and not
permitted. Use or injection of certain hazardous liquids or gases in the system (such as oxygen, alcohol or liquid petroleum gas) will harm the unit
and result in a combustible condition or hazardous external leakage. Misapplication will void all warranties and manufacturer's responsibilities.
SAFETY GUIDELINES
This manual contains information that is very important to know and understand. his information is provided for safety and to prevent equipment
problems. To help recognize this information, observe the following symbols.
CAUTION
Caution indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE
Notice indicates important information, that if not followed, may cause damage to equipment.
HR-0181(3)(5)-I-1902B-HB