Suncast BMDB3415 User manual

0361526B
Blow Molded Deck Box, 134gal
ASSEMBLY INSTRUCTIONS
Coffre de terrasse moulé par soufflage, 507 litres (134 gal)
INSTRUCTIONS D’ASSEMBLAGE
Arcón de resina moldeada para terraza, 134 gal.(507litros)
INSTRUCCIONES DE ARMADO
© 2019 Suncast Corporation, Batavia, IL

2
To purchase Suncast replacement parts and learn about other Suncast
products visit us online or call.
Pour acheter des pièces de rechange Suncast et pour plus d’informa-
tions sur d’autres articles Suncast, rendez-vous sur notre site Internet
ou appelez-nous.
Para comprar piezas de repuesto Suncast y obtener más información
acerca de otros productos Suncast, visítenos en línea o llámenos por
teléfono.
www.suncast.com
24 hours a day, 7 days a week, 365 days a year.
1-800-846-2345 or 1-630-879-2050
English ................................ 3
Français............................. 19
Español ............................. 35

3
Cleaning and Maintenance
Part How to clean
Deck Box To maintain the look of your product, we recommend
cleaning it each year with mild soap and water. DO
NOT use bleach, ammonia, or other caustic cleaners,
and DO NOT use stiff bristle brushes. Failure to
perform annual cleaning could result in permanent
staining of the plastic. This is not a manufacturing
defect and is not covered under warranty.
Safety and Compliance
• This item uses self-tapping screws in some areas. There are no pre-drilled
holes in the plastic. Use force when starting to drive the screw. Once the
screw pierces the plastic it will drive easier.
• Not intended for storage of flammable or caustic chemicals.
• Not intended for usage by children.
• This is not a toy box.
• To avoid risk of suffocation, do not allow children to play inside container.
• This product may become susceptible to impact damage in freezing
temperatures.
• DO NOT store near excessive heat.
• Exercise caution when moving fully loaded product. This product is not
intended for transporting heavy objects. Use as a stationary storage device
only.
• DO NOT stand on top.
• DO NOT store items on top.

4
Welcome Guide · English
Contents:
Before getting started, ensure the package contains the following components:
Parts shown may vary in style or color from the actual product.
G
I
H
x23 x4
x4
Hardware
Tools Required
x4
J

5
Bottom x1
Front
Panel x1
Rear
Panel x1
Right
Panel x1
Left
Panel x1
A
B
C
D
E

6
Lid x1
Hinge x2
Locking
Hasp x1
Shock x2
S-Rail x1
F
K
L
M
N

7
Assembly Instructions
Step 1:
Inserting Front Panel
Place floor smooth side facing up. Lower front panel (B) down
into slots bottom (A). While standing on bottom push down and
to the left to snap into place.
1
1
1
2
B
A

8
Assembly Instructions
Step 2:
Inserting Left Panel
Insert tabs on left side panel (E) into slots on front panel. Push
down until you hear a snap. Repeat with the other side panel.
1
2
E

9
Assembly Instructions
Step 3:
Inserting Back Panel
Insert tabs on rear panel into slots on left and right panels. Lower
back panel (C) down into slots on floor. Push down hard to snap
into place.
2
1
2
C

10
Assembly Instructions
Step 4:
Inserting Locking Hasp
Insert locking hasp (L) into slot on lid and push in until you hear a
snap. Attach using screw (G).
1
L2
G