Suncast MWT7220 User manual

OWNER'S MANUAL MWT7220
STORAGE TRENDS METAL UTILITY TABLE
Panelsde Bottom Tube C I Front Tube
with Logo Back Tube
with holes E' Reinforced
Square Tube
0630093 2 PCS 0630094 1 Pc 0630095 1 cs 0630096 1 c 0630097 3 cs
F] MWT Rear Gusset Adjustable Foot H I #10-24 x 1/2"
........J Truss Head
(3/16 -24 x 1/2)
oII 1/4-20 X 1 7/8"
Button Head J I 5/16 -18 X 2"
— Button Head
0630098 4 pcs 0630006 4 cs 0630021 16 cs 0630099 10 cs 0630100 6 cs
KJ 1/4 -20 x 1/2"
Button Head
Oii
MDF Table-Top 5/32" Wrench
w
NJ 13/64" Wrench
ifi
Flat Washer
0630031 12 cs 0630101 1 c 0630009 1 c 0630102 1 c 0630103 2 cs
For
Information on
Suncast products and
replacement parts see
www.suncast.com
2004 Suncast Corporation Patents Pending 0660011
IMPORTANT:
Follow Instructions listed below in the proper sequence as
numbered to assure fast, easy and correct assembly. This product
contains parts that can be damaged if incorrectly assembled
Before assembling, please count your parts and hardware as
listed below.
Do not fully tighten screws until the product is fully assembled.
REPLACEMENT PARTS ORDERING INSTRUCTIONS:
Call Suncast for pricing information. Call 800-846-2345 or 630-879-
2050. Monday-Friday 8:OOam-4:3Opm Central Time (expect holidays).
Or see www.suncast.com

1. To create Frame Assembly, attach
Front Tube with Logo (C) and Back
Tube with Holes (D) to Side Panels
(A), using screw (J) to secure.
2. Attach Bottom Tube (B) to Side
Panels (A), using Screw (J) to secure.
3. Attach Reinforced Square Tubes
(E) to Front Tube with Logo (C) and
Back tube with Holes (D), using
Screw (K) to secure.
4. Attach Rear Gussets (F) to Frame
Assembly with Screw (H).
5. Screw Feet (G) into holes in legs
of Frame Assembly. Adjust as
necessary to level unit.
6. Attach Table Top (L) to the top
of Frame Assembly, using Flat
Washer (M) and Screw (I).
MDF Top may be sealed, stained
or painted.
J.-..-
J .---. -
A-
A
-J
H
F
F
B
G
G
G
G0660011