Suncast ML314 User manual

OWNER'S MANUAL ML314
STORAGE TRENDS METAL 3 DRAWER NARROW LOCKER
IMPORTANT:
numbered to assure fast, easy and correct assembly. This product
Follow Instructions listed below in the proper sequence as
contains parts that can be damaged if incorrectly assembled
listed below.
Before assembling, please count your parts and hardware as
Do not fully tighten screws until the product is fully assembled.
REPLACEMENT PARTS ORDERING INSTRUCTIONS: '%
Call Suncast for pricing information. Call 800-846-2345 or 630-879-
2050. Monday-Friday 8:OOam-4:3Opm Central Time (except holidays).
Or see www.suncast.com
AJ Small Drawer
Front Panel Small Drawer
Right Side Panel Small Drawer Left Side Panel CJ Small Drawer
Back Panel
EDJ Drawer Bottom
Panel j Large Drawer
Front Panel I] Large Drawer
Right Side Panel
0630206 2 PCS 0630208 2 PCS 0630207 2 PCS 0630209 2 PCS 0630210 3 PCS 0630197 1 PC 0630199 1 PC
FJJ Large Drawer
Left Side Panel j Large Drawer
Back Panel .!jJ Small Drawer
Slide Set
0lj Right Side Panel
0
lij Left Side Panel JJ Top Panel Bottom Panel
0630198 1 PC 0630200 1 PC 0630204 3 PCS 0630202 1 PC 0630201 1 PC 0630189 1 PC 0630203 1 PC
L] Back Panel
f•...
L
MJ Caster Handle 0J M3.Sxl3mm-AB
Flat Head PJPhillips Pan Head
M4 x 0.7 x 4mm Flat Head
Socket Cap
M6x1.Ox2Smm
"j M4.2xl3mm-AB
Truss Head
0630188 1 PC 0630181 4 PC 0630192 3 PCS 0630205 24 PCS 0630196 6 PCS 0630161 4 PCS 0630183 16 PCS
SJ Push Rivet iJ Caster Bushing
(Comes installed in
Bottom Panel L) uJ 4mm
5/32 Wrench .'.For
/ Information on
QQI
Suncast products and
replacement parts see
www.suncast.com
€r.
0630211 6 PCS 0630182 4 PCS 0630009 1 PC
© 2004 Suncast Corporation H Patents Pending 0660018

Large Drawer Assembly:
2. Attach Large Drawer Back Panel (G) to
Side Panels (FL) & (FR), by lining up and
sliding the four Side Panel (FL) & (FR) tabs
with the four tab holes. Slide Back Panel
Locate the two middle holes, insert
Push Rivet (5) and press into place.
3. With holes in Drawer Bottom Panel (D) facing
Side Panels (FL) & (FR), set Drawer Bottom
Panel (D) in place inside assembled drawer frame.
1. Attach Large Drawer Left Side
(FL) to Large Drawer Front (E)
by lining up the two Drawer Front
tabs with the two Left Side tab holes.
Slide Side Panel down to engage
then secure with screw (R).
Repeat process for Large Drawer
Right Side (FR).
down to engage.
Attach Handle (N) to Large Drawer Front (E)
with screws (P).
4. Inner Drawer Slides have a "Z" shape
when viewed from the front.
Attach Inner Drawer Slides (H) to
Side Panels (FL) & (FR), and Bottom (D)
using screws (0). H

Small Drawer Assembly:
5. Attach Small Drawer Left Side
(BL) to Small Drawer Front (A)
by lining up the two Drawer Front
tabs with the two Left Side tab
holes Slide Side Panel down to
engage then secure with screw (R).
Repeat process for Small Drawer
Right Side (BR).
6. Attach Small Drawer Back Panel (C) to Side Panels
(BL) & (BR), by lining up and sliding the four Side Panel
(BL) & (BR) tabs with the four tab holes. Slide Back
Panel down to engage.
Locate the two top holes, insert Push Rivet (5)
and press into place.
Attach Handle (N) to Small Drawer Front (A) with
Screws (P).
7. With holes in Drawer Bottom Panel (D) facing
Side Panels (BL) & (BR), set Drawer Bottom Panel (D)
in place inside assembled drawer frame.
8. Inner Drawer Slides have a "Z" shape
when viewed from the front.
Attach Inner Small Drawer Slides (H) to
Side Panels (BL) & (BR), and Bottom (D)
using screws (0).
Repeat process for second Small Drawer.
0660018

9. Attach outer Small Drawer Slide (H) to Side
Panel (IL) using screws (0).
Repeat process for Right Side Panel (IR).
10. Attach Side Panel (IR) to Bottom
Panel (K) by lining up Side Panel
tab with tab receptacle in Bottom
Panel (IR) then connecting with
screws (Q).
Attach Side Panel (IL) to Bottom
Panel (K) using screws (Q).
11. Attach Top Panel (J) to Side Panels (IR) & (IL)
using screws (R).
0660018

12. Attach Back Panel (L) to Side Panels
(IR) & (IL), Top Panel (J), and Bottom
Panel (K) using screws (R).
R
13. Place locker on its top and Push Casters (M)
into caster bushing holes in Bottom Panel (K).
Hole
14. Install assembled drawers by
placing drawer slide rollers over cabinet
slide rollers and sliding drawer in place.
To remove drawer, pull out until it stops,
lift and pull out.