Suncast MBD3418 User manual

STORAGE TRENDS METAL
BASE CABINET with DRAWER
iMANUAT
IMPORTANT:
Follow Instructions listed below in the proper sequence as
numbered to assure fast, easy and correct assembly. This product
contains parts that can be damaged if incorrectly assembled
Before assembling, please count your parts and hardware as
listed below.
Do not fully tighten screws until the product is fully assembled.
MBD3418
REPLACEMENT PARTS ORDERING INSTRUCTIONS:
Call Suncast for pricing information. Call 800-846-2345 or 630-879-
2050. Monday-Friday 8:OOam-4:3Opm Central Time (except holidays).
Or see www.suncast.com
0630056 1 PC 0630057 1 PC 0630058 1 PC 0630059 1 PC
Bottom Panel
0630060 1 i'c
0630061 1 P 0630062 1 P 0630048 1 P 0630063 1 i'c 0630050 1 P
Drawer Slide Adjustable Foot LI #10 - 24 Nut M] Lock Washer Padlock Bracket
'0630064 2 c 0630006 4 Pcs 0630051 10 cs 0630053 10 cs 0630049 1 P
#4 X 1/2 AB
Truss Head
(1/8" -24 x 112')
#8 x 18 x112"
Truss Head
(5/32 - 16" x 112')
9j 1/4" -20 x 1 1/4"
Button Head j #1024 X 1 1/8"
Truss Head
(3/16" -24 x 1 118')
#1024 X 3/8"
Truss Head
(3/16-24 x 318')
0630054 2 cs 0630022 8 cs 0630007 12 cs 0630052 4 cs 0630077 6 cs
5/32" Wrench 3/8" Combination
Wrench / Information on
fSuncast products and\
I replacement parts see
(www suncast corn I
0630009 1 c 0630008 1 c
2003 Suncast Corporation Patents Pending 0660004

1. Attach Drawer Slide (J) to inside of Left
Panel (BL) and Right Panel (BR), using Screw
(P) to secure.
2. Attach Magnet (I) to Left Panel (BL), using
Screw (0) as shown.
3. Attach Top Panel (E) and Bottom Panel
(D) to Left Panel (BL) and Right Panel (BR),
using Screws (Q & P) as shown.
C - -.
r-.
Ip
Q
Q
4. Install Back Panel (C), using Screw (Q).
5. Attach Padlock Bracket (N) to Left Side,
using Screw (R), Lock Washer (M), and Nut
(L) as shown.
0660004
BL
B
BL
-l
—I
'I I
II
II
II
II
II
II
II
II
II
II
II
II
II
B
Q
Q

6. Slide inner portions of Drawer Slides
(J) out front of unit and attach to Drawer
(F) sides using Screw (5), Lock Washer
(M) and Nut (L) as shown.
7. Attach Drawer Handle (H) to the
Drawer (F), using Screw (5), Lock
Washer (M), and Nut (L) to secure.
8. Align Door Handle with Locking Tab (G) with the
holes in the middle of Door Panel (A). Attach Door
Handle with Locking Tab (G) with Screw (R), Lock
Washer (M) and Nut (L).
9. Screw Feet (K) into holes on legs of unit. Adjust
as necessary to level unit.
10. Align top and bottom hinges of Door (A) with
top and bottom hinge receptacles on unit. Slide
Door down to engage hinges.
0660004
5
0
H
0
A
0
G
0
MoL0oL