Sunjoy D-GZ009PCO User manual

1
Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start
to finish. The final product will be a quality piece that will go together smoothly and give years
of enjoyment.
Please read instructions thoroughly before assembly. Familiarize yourself with the inventory of
parts and the accompanying illustrations to assure safe and proper assembly.
IMPORTANT:
Periodically check all bolted connections on your gazebo to make sure they are tight and
secure. Please keep the instructions for future reference.
Please do not return this product to the store. For technical assistance on assembly or
replacement parts call Sunjoy Industries at 1(866) 578-6569 from 8:30 AM to 4:30 PM
EST or Email [e-mail] or visit www.sunjoyonline.com to place
your order or fax your parts replacement order form together with your purchase
receipt to 1 [phone] for assistance.
Assembly Instruction
Item#D-GZ009PCO

2
All you will need is a step ladder (not included).
Item Identification: For ease of identification, all parts are labeled to correspond to the Step
number in which the part is used.
1. Assembly Instructions must be followed.
WARNINGS:
2. Stakes supplied must be used to hold this gazebo in place when upright.
3. Warranty does not cover damage due to extreme weather conditions.
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT
FABRIC.
This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in
continuous contact with any flame source. The application of any foreign substance to the tent
fabric may render the flame-resistant properties ineffective.
This unit is heavy. Do not assemble this item alone.
1. When assembling and using this product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment. Please read all
instructions before assembly and use.
IMPORTANT:
2. Some parts may contain sharp edges, wear protective gloves if necessary. At least two
3. Keep all children and pets away from assembly area.
or
more people are recommended for safe assembly.
4. At least 6 feet from any obstruction such as fence, garage, house, overhanging branches,
laundry line or electrical wires.
5. Do not use the unit during an electrical storm, as there is a remote chance of getting struck
by lightning.
6. Do not leave the gazebo assembled when there is a risk of high wind, as possible damage
will occur to the structure. Remove fabric roof and secure screen & privacy panels.
7. Install on level surface.
8. Never barbecue under this gazebo or use lanterns that have open flames.
9. This package contains small items and plastic bags that should be kept away from children.
10. Check all screws for tightness before and during usage. Ensure that all connectors and
poles are firmly secured in position fully. It is important to do so before use so as to avoid a
possible collapse or damage to the item, which could also result in injury.
11. This gazebo is intended for decorative and sunshade purposes only and is not meant to
withstand extreme weather conditions including high winds, torrential rain and snow. Gazebo
fabric is water resistant, not water proof and may leak during exposure to precipitation.

3
Parts List
Post A 4
Long decorative slot 1 B1 2
Long decorative slot 2 B2 2
Short decorative slot 1 C1 2
Short decorative slot 2 C2 2
Sloped beam D 4
Long middle beam E1 2
Short middle beam E2 2
Sloped beam down
tube F 4
Sloped beam down
connector G 4
Middle beam down
connector 1 H1 2
Middle beam down
connector 2 H2 2
Arch support 1 I1 4
Arch support 2 I2 4
Long mosquito netting
pipe J1 4
Short mosquito netting
pipe J2 4
Small top sloped beam K 4
Big top connector L 1
Small top connector M 1
Base cover N 4
Base O 4
Finial P 1
Hook Q 1

4
Big canopy R 1
Small canopy S 1
Mosquito netting T 1
Curtain U 1
Hardware Pack used in Step 1
AA M6*15 Bolt 60 PCS
BB M6 Flat washer 60 PCS
W M6 Wrench 1 PC

5
BB M6 Flat washer 28 PCS
AA M6*15 Bolt 16 PCS
CC M6 Nut 4 PCS
DD M6*55 Bolt 8 PCS
Hardware Pack used in Step 2
Fig.1: Insert the Base cover (N) to the lower side of Post (A) and then attach Base (O) to post (A) by
using bolts (AA) and washers (BB).
Fig.2: Insert the decorative slots (C1/B1) into the decorative slots (C2/B2), then attach Middle beam
down connectors (H1/H2) to the decorative slots by using bolts (AA) and washers (BB).
Fig.3: Connect Post (A) with decorative slots together by using bolts (AA) and washers (BB).
Fig.4: Attach Mosquito netting pipes (J2/J1) to the decorative slots by using bolts (AA) and washers (BB).
Fig.5: Attach Sloped beam down connector (G) to decorative slots by using bolts (AA) and washers (BB).

6
GG Ring 104 PCS
FF ￠8*180 Stake 12 PCS
Fig.6: Connect Sloped beam (D) and Sloped beam down pipe (F).
Fig.7: Attach Sloped beams (D) to Big top connector (L) and then attach Hook (Q) to Big top connector (L).
Fig.8: Connect Sloped beam down pipe (F) and Sloped beam down connector (G) with nuts (CC) and
washers (BB).
Fig.9: Attach Middle beams (E1、E2) to Big top connector (L).
Fig.13
：
Attach the assembled Small canopy (S) by inserting the lower side tube of Small top
sloped beam (K) into the tube of Sloped beam (D).
Fig.14
：
Attach the lower end of Arch support 1 (I1) to Post (A) by using bolts (AA) and
washers (BB) and then attac
h the upper end of Arch support 1 (I1) to decorative slots.
Repeat step for Arch support 2 (I2)
Fig.10: Insert the lower end of middle beams (E1、E2) into Middle beam down connectors (H1、
H2). Then attach the big canopy but do not spread out.
Fig.11: Attach Small top sloped beams (K) to Small top connector (M).
Fig.12: Attach Small canopy (S) onto the small top and attach 4 corners to Small top sloped
beam (K), and then attach Finial (P) to the top.
Hardware Pack used in Step 3

7
Fig.15: Spread out the big canopy (R) and hang the hook onto the holes of the decorative slot and
then stretching it to fit.
Fig.16: Secure the gazebo to the ground by using stakes (FF).
Fig.17: Hang Mosquito netting (U) and Curtain (T) onto the mosquito netting pipes (J1/J2) by
using rings (GG).
LIMITED WARRANTY:
This limited warranty is extended to the original purchaser and applies to defects in materials and
workmanship of your item provided the item is maintained with care and used only for personal,
residential purposes.
The item is warranted to be free from defects in material or workmanship for a period of one (1) year.If
any defect is found, please call our customer service department at 1-866-578-6569 for help. The
manufacturer will not cover transportation or delivery costs, or compensate the individual or any outside
party for assembling or disassembling the product. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.
EXCLUSIONS: Items used for commercial, contract, or other non-residential purposes, or items
damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or
rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for warranty
claims. Warranty is to the original purchaser and is non-transferable. Any replacement of warranted
items will be in the original style and color, or a similar style and color if the original is unavailable or has
been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the
above exclusions and limitations may not apply. This warranty gives you specific rights, and you may
also have other rights, which vary from state to state.
Made in China