Sunjoy L-PG169PST-1A User manual

Assembly Instructions
8'x8' Pergola with Solid Slats _ Lars
Style# L-PG169PST-1A
DPCI# 009050547
Production No.: XXXXXXXX

Assembly Instructions
Safety Information
1. Two people are required for this assembly.
2. Some parts may contain sharp edges. Wear protective gloves.
3. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and
damage to equipment. Please read all instructions before assembly and usage.
DANGER
This unit is heavy! Do not assemble this item alone.
Warranty: 6 months
WHAT IS COVER?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided the item is maintained with
care and used only for personal, residential purposes.
IMPORTANT
KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.

Assembly Instructions
Parts List
A P11141C01108 Post 1 2
B P11142C01108 Post 2 2
C P11571A01108 Base Cover 4
D P11683A01108 Base 4
E P11064A01108 Cross Beam 1 2
F1 P11063A01194 Cross Beam 2 2
F2 P11059E01194 Cross Beam 3 4
G P13012C01194 Top Small Beam 1 9
H P13013C01194 Top Small Beam 2 1
I P12601A01108 Hook 1

Assembly Instructions
AA H02020C11 M6X20 Bolt 28 PCS
BB H19001C11 M6 Washer 28 PCS
CC H13001C11 M6 Spring Washer 2 PCS
DD H0200D11 M8X20 Bolt 48 PCS
EE H19001D11 M8 Washer 48PCS
FF H13001D11 M8 Spring Washer 48 PCS
GG P12401A0100 Stake ￠8*180 8 PCS
Z1 H0001C12 M6 Wrench 1 PC
Z2 H0001D12 M8 Wrench 1 PC
Hardware Pack

Assembly Instructions

Assembly Instructions
Fig.1: Insert Base Cover (C) into
Post (A, B), then fix Base (D) to
Post (A, B) by Bolt (AA) and
Washer (BB).
Fig.2: Attached the Cross
Beam 2(F1) to Post (B) by Bolt
(DD), Spring Washer (FF) and
Washer (EE). Then fix Cross
Beam 3(F2) to Post (B) by Bolt
(DD), Spring Washer (FF) and
Washer (EE). Then use same
way to assembly Post (A) and
Cross Beam 2, Cross Beam 3.
Fig.3: Attached Cross Beam 1 (E)
to Post (B) by Bolt (DD), Spring
Washer (FF) and Washer (EE).
Then use the same way to
assemble Post (A) and Beam 1 (E).

Assembly Instructions

Assembly Instructions
Fig.4: Attached the Hook (I)
to Top Small Beam 2 (H)
Fig.5: Attached the Top Small
Beam 2 (H) to Cross Beam 2(F1)
by Bolt (AA), Spring Washer
(CC) and Washer (BB).
Fig.6: Put The Top Small Beam
1(G)’s end into the U-shaped on
the side of Cross Beam 1(E) (Big
hole need put upper and small one
need put down), then fix them by
Bolt (AA) and Washer (BB).
Fig.7: Attach the assembled
pergola to lawn with Stake
(GG).