Sunjoy Heirloom Tete-a-Tete User manual

Heirloom Tete-a-Tete
Item# L-DN1159SAL
Congratulations on your purchase of our SUNJOY Heirloom Tete-a-Tete. Our clear, easy to
follow, step-by-step instructions will guide you through the assembly process from start
to finish.
WARNING:
zRead and follow all Warnings & Assembly Instructions before attempting to assemble.
zKeep children away from assembly area. Children and pets should be supervised when they
are in the area of construction
zBegin assembly not less than 6 feet from any obstruction such as a fence, garage, house,
overhanging branches, laundry line, or electrical wires.
zSome parts may contain sharp edges. Wear protective gloves as necessary.
zFor outdoor use only.
zInstall on level ground. Check all bolts for tightness before and during
usage.
IMPORTANT
Please take time to read these instructions thoroughly and follow each step carefully for safe and
easy operation. Keep this manual for future reference.
For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569
from 8:30AM to 5:30PM EST, or email us at [email protected], or visit www.sunjoydirect.com
for assistance.

No. Description
Qty
A Armrest 1
1
B Armrest 2
1
C Leg 1 1
D Leg 2 1
E Chair Body
2
F Table Top
1
G Shelf 1
H Connecting Support Bar 1 2
I Connecting Support Bar 2 2
J Seat Cushion
2
K Back Cushion
2
LSteel Spring Plate
˄Pre-assembled on I˅4
AA Bolt M6x20 12
BB Spring Washer M6 24
CC Flat Washer M6 24
DD Bolt M6x35 4
EE Big Washer 25x50x3
˄8pcs Pre-assembled ˅16
FF Bolt M8x40 8
GG Bolt M8x50
˄pre-assembled ˅8
HH NutM8
˄8pcs Pre-assembled ˅16
II Spring Washer M8
˄8pcs pre-assembled ˅16
JJ Flat Washer M8
˄8pcs Pre-assembled ˅16
KK Hex Key M6 1
LL Wrench M8 2
MM Bolt M6x25 8
Parts List

Step 3: Insert Connecting Support Bar 1 (H) into Armrests 1&2 (A&B) & Leg 1&2 (C&D).
Insert Bolt (MM) through Spring Washer (BB), Flat Washer (CC), Armrest 1&2 (A&B) and
Leg 1&2 (C&D). Then use Hex Key (KK) to lock them onto the Connecting Support Bar 1
(H), as shown in Fig 1.
Insert Bolt (AA) through Spring Washer (BB), Flat Washer (CC), Armrest 1&2 (A&B) and
Leg 1&2 (C&D). Then use Hex Key (KK) to lock them onto the Connecting Support Bar 2 (I)
by, as shown in Fig 2.
Do not tighten the hardware.
Step 1: Insert Bolt (DD) through Spring
Washer (BB), Flat Washer (CC) and Shelf
(G), then lock to Leg 1&2 (C&D) by Hex Key
(KK). Do not tighten them.
Step 2: Insert Bolt (AA) through Spring
Washer (BB), Flat Washer (CC), and Leg
1&2 (C&D), then lock to Table Top (F) by
Hex Key (KK), as shown below.
Tighten all the hardware.

Step 4: Insert Bolt (FF) through Big Washer (EE), Chair Body (E), Connecting Support Bar 2 (I),
Big Washer (EE), Flat Washer (JJ) and Spring Washer (II), then lock it with Nut (HH) by
Wrench (LL). Tighten all the hardware.
Step 5: Put Seat Cushion (J) on Chair Body (E). Then stick the Velcro.
Place Back Cushion (K) as shown below. Assembly Completed!

Care & Maintenance
Before using, clean the Tete-a-Tete completely with a soft dry towel. When not in use, wipe free of any
dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
Do not use strong detergent or abrasive cleaners. When not in use, recommend the use of patio
furniture covers.
Steel components of garden accessories and furniture are treated with rust inhibiting paint. However,
due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling the
product, in order to prevent the paint from being scratched.
Like all topical coatings, cleaning should be with a non-abrasive neutral pH cleaner, you may call the
toll free number 877-738-7325 to obtain it from V-SEAL Sealers.
Limited Warranty:
Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship
and materials for a period of 1 year from the date of purchase, provided the item was factory-sealed at
the time of purchase and is maintained with care and used only for personal, residential purposes.
Should any manufacturing defect arise within this warranty period, Sunjoy Industries will repair or
replace (at our option) any defective merchandise upon proof of purchase; however, transportation
and delivery costs, as well as payments to a third party for assembly or disassembly of the item,
remain the responsibility of the purchaser. A purchaser of an "open box," previously-returned, or
"clearance" item, as well as original purchasers outside of the warranty period, may obtain
replacement parts from Sunjoy Industries for products in current production, at nominal cost.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts
of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware
is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is
to the original purchaser and is non-transferable. Any replacement of warranted items will be in the
original style and color, or a similar style and color if the original is unavailable or has been
discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above
exclusions and limitations may not apply. This warranty gives you specific rights, and you may also
have other rights, which vary from state to state.