Sunjoy LDN916SAL Operating instructions

Production Number: XXXXXXXX Made In China 1/ 3
ASSEMBLY INTRUCTIONS
ITEM#：LDN916SALTable
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly, please call Sunjoy Industries at 1(866) 578-6569 anytime 24 hours /
7 days a week, or email to [e-mail], or visit www.sunjoyonline.com.

Production Number: XXXXXXXX Made In China 2/ 3
PARTS LIST
Label
Part Number
Description
QTY
A
P31326A06107
Table top
1
B
P31433A06107
Table leg
4
C
P31519A06107
Connection ring
1
HARDWARE PACK
Label
Part Number
Description
QTY
Image of Part
H1
H04030C11
Bolt M6x30
8
H2
H04020C11
Bolt M6x20
8
H3
H12001C11
Flat washer M6
16
H4
H13001C11
Spring washer M6
16
H5
P91001A07001
Food pad (preasssembled)
4
H6
P30310A06107
Umbrella hole cap
1
H7
H00002C12
Allen key M6
1
ASSEMBLY STEPS
Step 1:
Insert Bolt (H1) with Flat washer (H3) and Spring
washer (H4) through Connection frame (C) and
screw into Legs (B).
Start each bolt but keep bolts loose until attached
to the top.

Production Number: XXXXXXXX Made In China 3/ 3
Care & Maintenance:
Before using, clean the product completely with a soft dry towel.
When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse
thoroughly and dry completely. Do not use strong detergent or abrasive cleaners.
Steel components of garden accessories and furniture are treated with rust inhibiting paint. However, due to the
nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling the product, in
order to prevent the paint from being scratched.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of twelve
(12) months. However, we do not reimburse for transportation or delivery costs, nor compensate the individual or any
outside party for assembling or disassembling the product. This limited warranty is extended to the original purchaser
and applies to defects in materials and workmanship of your item, provided the item is maintained with care and used
only for personal residential purposes.
Exclusions
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of
purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color or a similar style and color
if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an
implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you
may also have other rights, which vary from state to state.
Step 2:
Insert Bolt (H2) with Flat washer (H3)
and Spring washer (H4) through Leg (B)
connection hole, screw into Table top
(A) using Allen key (H7). Once bolts are
started on each corner of the table, fully
tighten all top connection bolts. When
finished, go back and tighten all bolts
started in step 1.
Step 3:
Turn the table over and ensure all bolts are
right, adjust the foot pads until the table is
level, then cover the umbrella hole Table top
(A) with Umbrella hole cap (H6).

Production Number: XXXXXXXX Made In China 1/ 3
ASSEMBLY INTRUCTIONS
ITEM#：LDN916SAL Swivel Chair
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly, please call Sunjoy Industries at 1(866) 578-6569 anytime 24 hours /
7 days a week, or email to [e-mail], or visit www.sunjoyonline.com.

Production Number: XXXXXXXX Made In China 2/ 3
PARTS LIST
Label
Part Number
Description
QTY
A
P31108A06107
Chair frame
1
B
P30406A01107
T-support
1
C
P31211A06107
Chair base
1
D
P00414A02119
Cushion
1
HARDWARE PACK
Label
Part Number
Description
QTY
Image of Part
H1
H01040C11
Bolt M8x40
4
H2
P31601A01100
Square iron piece
4
H3
H12001D11
Flat washer M8 (4 preassembled)
8
H4
H13001D11
Spring washer M8 (4 preassembled)
8
H5
H14001D11
Nut M8 (preassembled)
4
H6
H01035C11
Bolt M8x35 (preassembled)
4
H7
P91701A07001
Telescope joint (preassembled)
1
H8
P30801A01100
Steel spring plate (preassembled)
2
H9
H00001D12
Wrench M8
2
ASSEMBLY STEPS
Step 1:
Connect T-support (B) to Chair frame
(A) by putting Bolt (H1) through Square
iron piece (H2), through Chair frame
(A), then through T-support (B) and
Square iron piece (H2); Finish assembly
by adding Flat washer (H3) and Spring
washer (H4) prior to Nut (H5). Use the
wrenches to tighten the bolt and nut
after all bolts are started. Please note the
assembly direction of the steel spring
plate.

Production Number: XXXXXXXX Made In China 3/ 3
Care & Maintenance:
Before using, clean the product completely with a soft dry towel.
When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse
thoroughly and dry completely. Do not use strong detergent or abrasive cleaners.
Steel components of garden accessories and furniture are treated with rust inhibiting paint. However, due to the
nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling the product, in
order to prevent the paint from being scratched.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of twelve
(12) months. However, we do not reimburse for transportation or delivery costs, nor compensate the individual or any
outside party for assembling or disassembling the product. This limited warranty is extended to the original purchaser
and applies to defects in materials and workmanship of your item, provided the item is maintained with care and used
only for personal residential purposes.
Exclusions
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of
purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color or a similar style and color
if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an
implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you
may also have other rights, which vary from state to state.
Step 2:
Insert the assembled parts in step1 into Chair base (C).
Step 3:
Put Cushion (D) onto Chair frame (A), fasten
the hook and loop.